IPC Standards Committee Reports – Packaged Electronic Components, Flex Circuits, High Speed/High Frequency, Rigid Printed Boards
December 7, 2015 | IPCEstimated reading time: 4 minutes
Packaged Electronic Components
The B-11 3-D Electronic Packages Subcommittee continued work on IPC-7091, Design and Assembly Process Implementation of 3-D Components. There has been significant interest in this standard from both the military and commercial markets, and the subcommittee is ensuring groups doing similar work are included in the efforts for IPC-7091.
Flexible Circuits
The D-11 Flexible Circuits Design Subcommittee met to advance the Working Draft to IPC-2223D, Sectional Design Standard for Flexible Printed Boards. The group reviewed and approved new drawings depicting flexible cross-sectional construction examples and unbonded flex cross-sectional constructions for rigid-flex designs. The group also reviewed new content addressing the factors that affect impedance and capacitance control for flex and rigid-flex printed board applications so as to mitigate signal integrity issues.
The D-12 Flexible Circuits Performance Subcommittee met to advance the Working Draft to IPC-6013D, Qualification and Performance Specification for Flexible Printed Boards. The group also reviewed a cross-sectional illustrations that address voiding or delamination in the transition zone between flexible material and rigid material. The group also reviewed examples of anomalies in flexible printed board assemblies (e.g. kinks in the ribbon cable following assembly operations) and agreed to submit recommendations to the IPC 7-31b task group for addressing these issues in a future revision to IPC-A-610, Acceptability of Electronic Assemblies.
The D-13 Flexible Circuits Base Materials Subcommittee began review and updating of IPC-4202A to ultimately revise it to B revision.
The D-15 Flexible Circuits Test Methods Subcommittee began to review all flexible circuits test methods for relevance to all materials, printed boards and design standards. Most if not all test methods that apply to old flexible circuits (those that begin with “FC” are likely to be obsolete and will likely be archived.
Page 1 of 3
Suggested Items
Real Time with… IPC APEX EXPO 2024: Ventec Discusses New Pro-bond Family of Advanced Products
05/01/2024 | Real Time with...IPC APEX EXPOChris Hanson, Ventec's Global Head of IMS Technology, outlines the launch of four pro-bond formulas that deliver an outstanding combination of low dissipation factor (Df) with a dielectric constant (Dk) range to maximize the design window for critical PCB parameters. As Chris points out, Pro-bond is designed for low-loss, high-speed applications, while thermal-bond dissipates heat from a component through the board to a heat sink.
IPC's Vision for Empowering PCB Design Engineers
04/30/2024 | Robert Erickson, IPCAs architects of innovation, printed circuit board designers are tasked with translating increasingly complex concepts into tangible designs that power our modern world. IPC provides the necessary community, standards framework, and education to prepare these pioneers as they explore the boundaries of what’s possible, equipping engineers with the knowledge, skills, and resources required to thrive in an increasingly dynamic field.
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Ansys, TSMC Enable a Multiphysics Platform for Optics and Photonics, Addressing Needs of AI, HPC Silicon Systems
04/25/2024 | PRNewswireAnsys announced a collaboration with TSMC on multiphysics software for TSMC's Compact Universal Photonic Engines (COUPE). COUPE is a cutting-edge Silicon Photonics (SiPh) integration system and Co-Packaged Optics platform that mitigates coupling loss while significantly accelerating chip-to-chip and machine-to-machine communication.