IPC Standards Committee Reports – Packaged Electronic Components, Flex Circuits, High Speed/High Frequency, Rigid Printed Boards
December 7, 2015 | IPCEstimated reading time: 4 minutes
The reactivated D-22 High Speed/High Frequency Design Subcommittee met to review an initial draft of IPC-2228, Sectional Design Standard for High Frequency (RF/Microwave) Printed Boards. While agreed that the document is not intended to be used as a stand-alone document (it will support the IPC-2221B, Generic Standard on Printed Board Design), the initial draft does contain a substantial amount of “how-to 101” tutorial information for the designer as taken from the older IPC-2252, Design Guide for RF/Microwave Printed Boards. It was decided that IPC should conduct an open-ended industry survey that asks two basic questions to help steer the course of the IPC-2228:
- If a printed board fabricator switched up a job from an FR-4 board (IPC-6012) to an RF board (IPC-6018), what things would the fabricator need to focus on for that job (e.g. drilling, plating and marking)?
- What elements of fabrication and assembly are different between traditional rigid printed boards and RF printed boards that IPC should focus on (e.g. sequential lamination, back drilling and material handling)?
The D-22 High Speed/High Frequency Performance Subcommittee met to complete the process of reviewing and providing disposition to industry comments submitted during the summer 2015 Final Draft circulation of IPC-6018C, Qualification and Performance Specification for High Frequency (Microwave) Printed Boards. The document will now be prepared for official balloting and a corresponding IPC-6018CS Space and Military Avionics Applications Addendum will also be drafted for a 2016 release.
The D-24a TDR Test Methods Task Group met to review the status of the Gage R&R Validation Program for the forthcoming “B” Revision to IPC-TM-650, Method 2.5.5.7, Characteristic Impedance of Lines on Printed Boards by TDR.
The D-24b Bereskin Test Methods Task Group met to review two different industry approaches to addressing the Bereskin stripline resonator test method that lends itself to the test and measurement of Dk and Df of thin dielectric materials up to 20 GHz. An IPC-TM-650 Test Method could be developed that provides both procedures as Methods A and B.
The D-24c High Frequency Test Methods Task Group meet to review data from five participating companies in a round robin test program that will assess the state-of-the-art of test material provides and testing labs in the measurement of dielectric properties of materials at frequencies above 10 GHz. A variety of test methods are being utilized based on current practices utilized in commerce.
Page 2 of 3
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/03/2024 | Nolan Johnson, I-Connect007This week’s most important news is strategic—and telling. When one puts together the IPC industry reports, we simply have to include the recent conversation with Shawn DuBravac and Tom Kastner. On the design side, check out the latest “On The Line With…” podcast featuring Brad Griffin from Cadence Design Systems, discussing SI and PI in the realm of intelligent system design.
Synopsys, Samsung Electronics Collaborate to Achieve First Production Tapeout of Flagship Mobile CPU
05/03/2024 | PRNewswireSynopsys, Inc. announced that Samsung Electronics has achieved successful production tapeout for its high-performance mobile SoC design, including flagship CPUs and GPUs, with 300MHz higher performance using Synopsys.ai™ full stack AI-driven EDA suite and a broad portfolio of Synopsys IP on Samsung Foundry's latest Gate-All-Around (GAA) process technologies.
Altair Acquires Research in Flight, Forging a New Path for Aerodynamic Analysis
05/03/2024 | AltairAltair a global leader in computational intelligence, announced it has acquired Research in Flight, maker of FlightStream®, which provides computational fluid dynamics (CFD) software with a large footprint in the aerospace and defense sector and a growing presence in marine, energy, turbomachinery, and automotive applications.
Real Time with… IPC APEX EXPO 2024: Software Solutions for Circuit Board Challenges
05/03/2024 | Real Time with...IPC APEX EXPONolan Johnson speaks with Will Webb from Aster Technologies about their software solutions for design teams, manufacturing, test engineers, and process engineers. Aster's software addresses the increasing complexities of circuit boards and the need for alternative testing methods.
Real Time with… IPC APEX EXPO 2024: My Role as a Technology Solutions Director
05/02/2024 | Real Time with...IPC APEX EXPOPeter Tranitz, senior director of technology solutions at IPC, shares insights into his role as the design initiative lead. He details his advocacy work, industry support, and the responsibilities of the design initiative committee. The conversation also covers the revamping of standards, the IPC Design Competition, and the implementation of design rules in software tools.