Robots: Eliminating the First Contact with an Enemy Force

"We should be thinking about having a robotic vanguard, particularly for maneuver formations," said Dr. Bob Sadowski. "There's no reason why the first contact with an enemy force should be with a man-platform, because it means that platform is at the greatest risk."

DuPont, Taconic and PFC Team Up For High-Speed Flex

At DesignCon, I sat down with three flex circuit specialists: Glenn Oliver of DuPont, Tom McCarthy of Taconic, and Steve Kelly of PFC Flexible Circuits. Our discussion covered a lot of territory, most notably the findings they described in the paper they were about to present later that day at DesignCon, and the future of flex, as they see it.

Integration of Cyberspace Capabilities into Tactical Units

The Army's efforts to integrate operational cyberspace capabilities into its tactical units took another big step forward during a recent training rotation at the National Training Center at Fort Irwin, California.

Unveiling the Mysteries of the Hot Universe

A University of Southampton researcher will explore the structure and evolution of the Universe, as part of the ASTRO-H X-ray space telescope mission that launched in Japan.

How a NASA Team Turned a Smartphone into a Satellite Business

Satellites aren’t small or cheap. The Solar Dynamics Observatory launched by NASA in 2010 weighs about 6,800 pounds and cost $850 million to build and put into orbit. Even the satellites built under NASA’s Discovery Program, aimed at encouraging development of low-cost spacecraft, still have price tags beyond the reach of smaller companies or research organizations.

High-Performance Laminates

High-performance laminates are characterized as base materials that in one or more aspects exceed the performance of FR-4, CEM, or paper/phenolic laminates. In this article, Karl Dietz talks about the different types of laminates, their dielectric requirements, and how they are being manufactured.

FLA Program Takes Flight

They may not have zoomed flawlessly around obstacles like the Millennium Falcon did as it careened through the hull of a crashed Star Destroyer in Star Wars VII. But the sensor-loaded quadcopters that recently got tested in a cluttered hangar in Massachusetts did manage to edge their way around obstacles and achieve their target speeds of 20 meters per second.

Fabrication Drawings and Electrical Test— Reading the Fine Print

When a new PCB design is born, designers envision what the product will provide when completed. Whether the product is for the consumer, aerospace, military, medical or countless other markets, the designers—or more likely, the customers—expect certain deliverables on the commodity they wish to purchase.

EMS: Quo Vadis? (Where are You Going?)

In an industry that is constantly changing, EMS providers have reinvented themselves to stay relevant and fuel profitable growth. In this article, Integrated Micro-Electronics Inc.'s Frederick Blancas talks about five of the many transformation trends happening in the EMS industry, and how they are pushing the industry to continue to evolve, progress and advance.

What a Long, Strange Trip it’s Been—and It’s a Long Way from Being Over

Harvey Miller has been in the PCB industry for more than 40 years, and he’s probably seen it all. I recently sat down with Harvey at a wine bar in Palo Alto to learn more about his history in the industry and where he sees it going forward. Harvey arrived wearing jogging shorts and running shoes. No surprise after what his doctor recently shared with him.

Mission Teams Prepare for Critical Days

Moments after Sentinel-3A separates from its rocket, a team of European mission control specialists will assume control, shepherding the newMoments after Sentinel-3A separates from its rocket, a team of European mission control specialists will assume control, shepherding the new spacecraft through its critical first days in space. spacecraft through its critical first days in space.

Happy’s Essential Skills: The Need for Total Quality Control (Six Sigma and Statistical Tools), Part 2

The statistical representation of Six Sigma describes quantitatively how a process is performing. To achieve Six Sigma, a process must not produce more than 3.4 defects per million opportunities. A Six Sigma defect is defined as anything outside of customer specifications. A Six Sigma opportunity is then the total quantity of chances for a defect.

The Road Less Traveled (Part 3): Why Process Controls and Pride Matter

In the last piece of this three-part article series, Zentech Manufacturing Inc.'s Judy Warner writes about the importance of SMT process controls and pride of ownership, and how having them as part of the company culture can lead to manufacturing and service excellence and success.

New Tool Provides Successful Visual Inspection of Space Station Robot Arm

As NASA takes a break in RRM operations, it’s looking back on past achievements and celebrating one of its latest accomplishments - the successful inspection of Canadarm2, the International Space Station’s (ISS) robotic arm. In time, this visual inspection capability may help future servicing ventures at other orbits inspect for damage and failures on their spacecraft.

Is IPC the Past or the Future of our Industry?

In the electronics industry, there seems to be an infinite number of trade organizations, each with their own special niche and purpose. It can be challenging from the outside to understand why they each exist and how they fit together.

The Road Less Traveled (Part 1): Contract Manufacturing Differentiators

The word "differentiator" is tossed around a lot these days in the electronics industry—especially within the contract manufacturing (CM) community. When evaluating a new potential CM partner, decision makers frequently ask: "What would you say differentiates your organization from other contract manufacturers?" This article talks about three powerful and very real difference-makers that would set a CM apart from the competition.

UC Davis Photonics Technology Helps Shrink Telescopes

For hundreds of years, the general design of an optical telescope has remained pretty much the same. Even if you’re looking at the stars with the naked eye, the image-forming process works in a similar way. Both methods collect light from an object and refract that light to form an image.

Bridging the Bio-Electronic Divide

A new DARPA program aims to develop an implantable neural interface able to provide unprecedented signal resolution and data-transfer bandwidth between the human brain and the digital world.

Counting Photons…How Low Can You Go?

The process of detecting light—whether with our eyes, cameras or other devices—is at the heart of a wide range of civilian and military applications, including light or laser detection and ranging (LIDAR or LADAR), photography, astronomy, quantum information processing, medical imaging, microscopy and communications.

Strengthening Our Space Technology Future: Snapshots of Success

NASA’s Space Technology Mission Directorate (STMD) checked off a number of key accomplishments in 2015. These advancements pushed the technological envelope, not only for use near Earth, but also to support future deep-space exploration missions.

Mr. Laminate Tells All: Who Would Like a Mil-Spec Audit?

I remember when IPC-4101 was completed and released in December 1997 and the question came up “should IPC create a policeman program to enforce it?” To a person that helped create IPC-4101, absolutely no one wanted such an audit program ever again. Including me and the IPC staff liaisons. Maybe we should have rethought that position.

CES: Day One

CES Unveiled is the official media event for CES. It is the first official happening of what promises to be a very busy and fascinating week. At this event, members of the press get to preview a number of innovative startups as well as some new products from a few established global brands.

NASA Research Could Save Commercial Airlines Billions in New Era of Aviation

The nation’s airlines could realize more than $250 billion dollars in savings in the near future thanks to green-related technologies developed and refined by NASA’s aeronautics researchers during the past six years.

A Conversation with IPC President and CEO John Mitchell

I-Connect007's Patty Goldman was able to sit down with John Mitchell, president and CEO of IPC, to discuss the organization and where we are going as an industry. We discussed IPC’s four aspirational goals—standards, education, advocacy and solutions—as well as short-term goals. We also talked a bit about going virtual and becoming paperless.

DARPA HO HO HOpes to Give Santa’s Workshop a High-Tech Makeover

DARPA has announced it is extending its High-speed Optimized Handling of Holiday Operations (HO HO HO) initiative, which the Agency launched last year to help Santa Claus and his elves more quickly and efficiently complete their holiday duties.

IPC: Connecting Electronics Industries

John Mitchell, president and CEO of IPC—Association Connecting Electronics Industries, provides the basic overview of the association—its goals and basic mission, activities, and how it best serves its membership. He also provides a snapshot of how IPC promotes technology development in the industry through standardization.

Alpha Talks Challenges of Solder Recycling

Jason Fullerton, customer technical support engineer with Alpha, talked with I-Connect007's Patty Goldman about his presentation on recycling solder and why doing this in-house is not a good idea. He also discussed about the new, smaller particle solder pastes and about Alpha’s recycling program that is really beneficial to their customers.

NASA and Star Wars: The Connections Are Strong in This One

NASA astronauts “use the force” every time they launch … from a certain point of view. We have real-world droids and ion engines. We’ve seen dual-sun planets like Tatooine and a moon that eerily resembles the Death Star. And with all the excitement around the premiere of Star Wars: The Force Awakens, the Force will soon be felt 250 miles above Earth on the International Space Station.

Innovative New Uses for Ceramic Column Grid Arrays from TopLine

TopLine President and CEO Martin Hart discusses his paper on ceramic column grid arrays (CCGA) at the recent SMTA International show in Chicago. Hart explains the relationship between CCGA and ball grid arrays (BGA), and TopLine's drive to find new uses for CCGA.

Spinoff 2016 Highlights Space Technologies Used in Daily Life on Earth

NASA technology is all around us, turning trash into oil, saving women from a deadly complication of childbirth, and putting the bubbles in beer. These technologies and more are featured in the 2016 edition of NASA’s annual Spinoff publication, highlighting the many places NASA shows up in daily life and the aeronautics and space programs where the innovations got their start.

The Associations Issue

Well, it’s the end of the year. How did that happen? It really is true that every year goes by a little faster. You young whippersnappers out there won’t know what I’m talking about, but just you wait and see. We changed it up for our December issues this year. Instead of doing a year-end review, we decided to devote this month to our associations and trade organizations—at least some, because when you start poking around, you will find there are scads of them.

Honeywell Paper Investigates Avionics Vibration Durability

Dr. Joseph Juarez, principal mechanical engineer at Honeywell International, discusses with I-Connect007's Andy Shaughnessy his SMTA paper, which addresses avionics vibration durability between tin-lead and lead-free solder, the years of testing he conducted, the importance of doing a good soldering job, and some of the surprising findings of his research.

Seeking a New Generation of Light-based Sensing Systems

Find a way to replace a large, heavy and expensive technology with an equivalent one that’s a lot smaller, lighter and cheaper and you have a shot at turning a boutique technology into a world changer. Think of the room-sized computers of the 1940s that now are outpowered by the run-of-the-mill central processing units in laptop computers.

The Opportunities for Plasma Processing

Pete Starkey interviewed Andre Bodegom, managing director of Netherlands-based Adeon Technologies B.V., about their long relationship with Nordson MARCH, typical applications for plasma equipment, and what the most challenging materials are from the point of view of plasma processing in the PCB industry.

NASA's SOHO Celebrates 20 Years of Space-based Science

After 20 years in space, ESA and NASA’s Solar and Heliospheric Observatory, or SOHO, is still going strong. Originally launched in 1995 to study the sun and its influence out to the very edges of the solar system, SOHO revolutionized this field of science, known as heliophysics, providing the basis for nearly 5,000 scientific papers. SOHO also found an unexpected role as the greatest comet hunter of all time—reaching 3,000 comet discoveries in September 2015.

Advancing the Design and Modeling of Complex Systems

Complex interconnected systems are increasingly becoming part of everyday life in both military and civilian environments. In the military domain, air-dominance system-of-systems concepts, such as those being developed under DARPA’s SoSITE effort, envision manned and unmanned aircraft linked by networks that seamlessly share data and resources in real time.

Tremol SMD Talks EMS Trends and Industry Outlook

At the recent productronica 2015 event in Munich, Germany, I interviewed Kiril Yanneff, CEO of Bulgaria-based EMS firm Tremol SMD about the electronics manufacturing landscape in east Europe and his outlook for the industry. He also spoke about the significance of automating production lines.

'Chemical Laptop' Could Search for Signs of Life Outside Earth

If you were looking for the signatures of life on another world, you would want to take something small and portable with you. That's the philosophy behind the "Chemical Laptop" being developed at NASA's Jet Propulsion Laboratory in Pasadena, California: a miniaturized laboratory that analyzes samples for materials associated with life.

CDR, Orange Rockets and a Sense of 'Since'

Already in 2015, the Space Launch System team has done things like successfully fired an incredibly powerful qualification test version of the solid rocket boosters, completed an entire series of full-duration tests of a RS-25 core stage engine, built a structural test article of the first flight’s upper stage and filled a factory floor with 50 barrels, rings and domes, all 27.6 feet around, all waiting to be stacked into sections of the core stage.

Made in USA and Total Cost: Six Ways U.S. Sourcing Saves Money

There is no question that manufacturing in countries known for lower labor costs can save money on some projects. In cases of highvolume production, selecting low-cost labor regions close to end markets can generate significant savings and in some cases, fulfill the local content requirements necessary for entry into those markets.

American Standard Circuits Taking Business to New Heights

PCB007 Managing Editor Patty Goldman sat down with American Standard Circuits President Anaya Vardya at the recent SMTAI show and conference in Rosemont, IL. Anaya wanted to share all the great new things going on at his company. Among the topics they discussed: new equipment, new processes, new people, and what it all means for ASC’s growth.

NASA Investigates Techniques for Cooling 3-D Integrated Circuits Stacked Like a Skyscraper

Future integrated circuitry is expected to look a lot like skyscrapers: units will be stacked atop one another and interconnects will link each level to its adjacent neighbors, much like how elevators connect one floor to the next. The problem is how do integrated-circuit designers remove heat from these tightly packed 3-D chips? The smaller the space between the chips, the harder it is to remove the heat.

NASA Takes Lasercom a Step Forward

A NASA-developed laser communication (lasercom) system made headlines in 2013 when it demonstrated record-breaking data download and upload speeds to the moon. Now, a NASA optical physicist says he can match those speeds -- plus provide never-before-achieved, highly precise distance and speed measurements -- all from the same relatively small package.

Interim CEO Jeff McCreary Discusses Recent Changes at Isola

Isola’s Interim President and CEO Jeff McCreary explains to Barry Matties the impetus for the personnel reduction taking place at Isola, the closing of their northern California facility, and why there’s no need to panic. He also shares his view of what the industry may expect from Isola going forward and what the company is looking for in a new CEO, the name of which McCreary expects to announce in the next few months.

Gold Embrittlement Mitigation: Understanding the New J-STD-001 Requirements

With the advent of more information from studies on the behavior of how much gold can impact the mechanical structure of the solder joint, the "washing away" of gold has become more important. This article discusses the significant changes made in the J-STD-001 specification, and their impact in the EMS and OEM industries.

Advanced Airborne Networking Capabilities Sought for Hostile Environments

DARPA solicits proposals to enable manned and unmanned air systems to rapidly, securely, and automatically share information across diverse waveforms and networks despite adversary jamming

The Real Martian Spinoffs Part 3: Harnessing the Power

It will be the most powerful rocket ever built. More powerful than the mighty Saturn V that took humans to the moon, the Space Launch System (SLS), NASA’s newest rocket currently under development, will have the capability to send astronauts deeper into space than ever before. With SLS and the Orion capsule, humans will no longer have to dream of walking on Mars: They finally will do it.

Movies, Mars Missions and Why Murphy Was An Optimist

The old adage that “Anything that can go wrong will go wrong” has a reputation of being the apogee of pessimism, but think about how much simpler it would make things if it were true. Spaceflight is full of unknown possibilities, and if Murphy’s Law were really true, you’d only have to prepare for the worst of them.

Vanishing Acts: A Call for Disappearing Delivery Vehicles

It sounds like an engineering fantasy: A flock of small, single-use, unpowered delivery vehicles dropped from an aircraft, each of which literally vanishes after landing and delivering food or medical supplies to an isolated village during an epidemic or disaster. It would be nothing more than a fantasy, were it not that the principle behind disappearing materials has already been proven.

The Application of Advanced Ultrasonics in Metal Plating Processes

Most surface modification chemical treatments by their very nature contain hazardous and oxidising chemicals; there is a major concern that these chemicals are used maliciously with the intent to manufacture explosives or formulate poisons to harm the public. Cyanide-based plating solutions and high concentrations of hydrogen peroxide used in current techniques are a significant use of these materials in industry.

Liquid Cooling Moves Onto the Chip for Denser Electronics

Using microfluidic passages cut directly into the backsides of production field-programmable gate array (FPGA) devices, Georgia Institute of Technology researchers are putting liquid cooling right where it's needed the most - a few hundred microns away from where the transistors are operating.

TALONS System Mimics a Mast as Tall as a Skyscraper

DARPA’s Towed Airborne Lift of Naval Systems (TALONS) research effort recently demonstrated a prototype of a low-cost, fully automated parafoil system designed to extend maritime vessels’ long-distance communications and improve their domain awareness.

The Reindustrialisation of Europe

With an inquisitive mind and a head for challenges, besides the ability to think outside the box and the courage to dare to be different and strive to be first, Spirit Circuits MD Steve Driver can be relied upon to grab the attention of an audience of PCB professionals. As keynote speaker at the Institute of Circuit Technology Hayling Island Seminar, he lived up to his reputation with a motivational presentation, the two themes of which exemplified his latest entrepreneurial venture.

DoD’s First Pass at Grey Market Regulation

The U.S. government gets a great deal of heat for many things, including fostering the introduction of counterfeit components into the supply chain. But when you really study how their procurement process is setup, when you break down the layers, it’s not hard to see how a counterfeit component or suspect material can find its way in.

ELCOSINT - The Future of High Temperature Interconnect

The increasing need for electronic assemblies to endure high-temperature operating conditions in aerospace, automotive, oil and gas drilling, power management and renewable energy applications, whether those conditions involve high ambient temperatures, high cycle temperatures or high junction temperatures, is driving the development of high temperature interconnection technologies.

Perovskite Photovoltaics Excitement

Ultrathin, flexible, stretchable and lightweight versions have been produced by Johannes Kepler University in Austria powering a miniature aircraft and airship. With 100% yield, exhibiting 12% efficiency they are only 3μm thick and weigh 5.2g m-3. Organolead halide perovskites are promising because they absorb light more efficiently: thinner layers are needed. Researchers suggest it could power EIVs as robotic insects and drones, and its flexibility and stretchability could be useful in bio-electronics.

Sensor Data Fusion Offers Countermeasures Against Small Drones

Airbus Defence and Space has developed a counter-UAV system which detects illicit intrusions of Unmanned Aerial Vehicles (UAVs) over critical areas at long ranges and offers electronic countermeasures minimizing the risk of collateral damage.

Fortifying Computer Chips for Space Travel

Space is cold, dark, and lonely. Deadly, too, if any one of a million things goes wrong on your spaceship. It's certainly no place for a computer chip to fail, which can happen due to the abundance of radiation bombarding a craft. Worse, ever-shrinking components on microprocessors make computers more prone to damage from high-energy radiation like protons from the sun or cosmic rays from beyond our galaxy.

NASA is Laser-focused on Deep Space Communication

Today’s technology has all but eliminated time delays in telecommunication on Earth, but when they do occur they can be frustrating, especially when trying to communicate complex or time sensitive information. The same type of delay could happen when communicating with spacecraft and crew members in deep space on the journey to Mars.

Addressing Quality and Manufacturability Challenges of Mission-Critical Products

Mission-critical military and aerospace PCBAs are based on 100% SMT and optimized for manufacturability from day one of design. But the reality is that many of these products utilize mixed technology. In many cases, these mixed technology designs often violate industry-standard design guidelines, creating manufacturability issues.

Latent Short Circuit Failure in High-Rel PCBs due to Cleanliness of PCB Processes and Base Materials

Latent short circuit failure of power PCBs has been associated with fiber contamination of the dielectric material. Tests and inspections have shown various sources of contamination in laminate, prepreg and on etched innerlayers. It has been demonstrated by IR tests that contamination can cause breach of insulation due to electromigration.

Gary Ferrari Shares His Thoughts on PCB Design and More

Recently, I spoke with Gary Ferrari, director of technical support at Firan Technology Group, about numerous topics related to PCB design. Our conversation ranged from CID training to the need for reaching high school students as a way of introducing more young people to career opportunities in our industry. We also covered strategies for helping customers design and build better product, and keeping designers provided with the most critical part of their supply chain—information.

Agricultural Drones and Flexible Circuits

Agricultural drones are expected to have a significant impact on farming over the next few years. In the article mentioned above, the drone’s ease of use and affordability make this a tool that virtually every farmer could employ. One major complementary technology to the drone is the advances in imaging technology and analysis. Specifically, the agricultural drone gives farmers data analysis capability that they have not had before.

Could 'Windbots' Someday Explore the Skies of Jupiter?

A team of engineers at NASA's Jet Propulsion Laboratory, who wondered if a probe could be buoyant in the clouds of Earth or a distant gas giant planet, like Jupiter, has recently begun studying their question, thanks to a one-year, $100,000 study, funded by NASA's Innovative Advanced Concepts (NIAC) program.

A Look at the High-Reliability Interconnect Market

In an interview with I-Connect007, Mark Cormier of Miraco Inc. discusses his company's activities and capabilities, the latest trends and drivers in the high-reliability segment, and their strategies when it comes to managing their assembly work as well as their audit processes to find EMS providers.

Changing the Face of Displays…One Button at a Time

Michael Detarando, president and CEO of Incom, and Emilijo Mihatov, business development manager at Fairlight discuss with I-Connect007's Barry Matties how Fairlight is incorporating Incom's technology into their famous products for the recording and broadcast industries, along with other applications such as elevator control panels.

Avoid Overbuilding your RF Printed Circuit Board

Today, many companies are overbuilding and “overmaterializing” their RF printed circuit boards. In this interview, James Hofer of Accurate Circuit Engineering (ACE) shares some strategies to avoid doing both, which will help lower the total cost of your PCB and improve the overall product quality. Hofer also discusses some of the challenges in the laminate supply chain.

EIPC Summer Conference: Day 2

Refreshed after an excellent conference dinner, and for most, a good night’s sleep, delegates returned for the second day of the EIPC Summer Conference in Berlin, continuing the theme of improving profitability through technical leadership and innovation to meet future market requirements, with sessions on materials and processes for high performance PCBs and advanced material testing strategies to meet OEM and ODM needs.

EIPC Summer Conference, Berlin: Day 1

Berlin, capital of Germany and a world city of culture, politics, media and science, was the venue for the 2015 EIPC Summer Conference, which attracted delegates from sixteen countries, including Russia, Hong Kong, Japan, Israel, USA and Canada, as well as the European Union, to experience a programme of 21 technical presentations over two days. Also included was a visit to the Berlin laboratories of Fraunhofer Institute, Europe’s largest application-oriented research organisation.

Wearable Technology and Flexible Circuits

Flexible circuits are an ideal fit for wearable technology. Wearable electronics need to be light, dense and bendable. While what is currently considered standard flexible circuit technology is more than adequate for many the wearable products, there are requirements that may be pushing the boundaries a bit.

American Standard Circuits’ Unique Offerings Contribute to Long-term Success

At the recent IMS RF and microwave show in Phoenix, Arizona, Anaya Vardya, CEO of American Standard Circuits, sat down with I-Connect007's Barry Matties to discuss the current market trends, the company's recent equipment investments, and where American Standard Circuits' growth will likely come from.

Flexible Circuit Materials for High-Temperature Applications

To meet the increasing needs for flexible circuit materials for high-temperature applications, new test methods will need to be developed. These new methods will assign new ratings that are consistent with actual performance.

NEPCON China 2015 a Resounding Success in Shanghai

The three-day event was a complete success, bringing together nearly 22,000 trade visitors and high-quality buyers, as well as 450 leading brand names from 22 countries and regions worldwide. NEPCON China keeps up with market trends and gathers resources from all stakeholders to present a comprehensive event that covers SMT, new electronics materials, soldering, dispensing, electronics automation, measurement and other innovative technologies and products across the world.

Flexible Circuits and UAV Applications

The utility offered by flexible circuits in UAVs mimics the advantages that make it popular in other portable electronic applications: lightweight, thin, highly reliable, flexible during use, and an ability to electrically connect across multiple layers as part of a complete packaging interconnect solution.

Advances in Electronics Assembly Technology - SMART Group Seminar Preview

In a preview webinar to introduce the upcoming SMART Group seminar where the latest advances in assembly technology and reliability will be discussed by industry and subject experts, SMART Group Technical Committee members Charles Cawthorne from MBDA and Ian Fox from Controls and Data Services summarized the papers to be presented.

Material Witness: How About that Technical Roadmap!

You may remember the movie "What About Bob?" If you do, you may recall the scene in which Bob (Bill Murray) confronts his psychiatrist (Richard Dreyfuss) and emotes, “I need! I need! I need! Gimme! Gimme! Gimme!” As I thought recently about some of the drivers that IPC and others have incorporated into their technical roadmaps, I feel a bit like that befuddled psychiatrist.

CyberOptics: Honing in on the High-Reliability Market with 3D AOI and SPI Platforms

I-Connect007 Publisher Barry Matties and CyberOptics’ Sean Langbridge spent time together in China recently, where they discussed, among other things, the company’s newest product launch, a 3D AOI and SPI platform. Langbridge also discusses the latest requirements for inspection.

Stretchable Inks: Changing the Wearables Market and the Landscape of Manufacturing

I-Connect007 Publisher Barry Matties and DuPont’s Steven Willoughby and Michael Burrows spoke recently and discussed new material for wearable electronics: stretchable inks. Wearable electronics is a fast growing sector of the electronics industry that is inspiring new and exciting products, as well as changing the requirements for becoming an electronics manufacturer.

Reliability Assessment of No-clean and Water-soluble Solder Pastes, Part II

Twenty-five years ago, solder paste residues had to be cleaned after reflow due to their corrosive nature: two ways of cleaning were available, either with solvent or by using water, with or without detergent. Now, the assembly world is mainly no-clean: paste formulation is safer in terms of chemical reliability and process costs are reduced without cleaning.

A Conversation (and Day) with Joe Fjelstad, Part 2

In Part 2 of this multi-part interview series, Verdant Electronics Founder and CEO Joe Fjelstad, and I-Connect007 Publisher Barry Matties discuss the future of what’s to come for the electronics industry, which, according to Fjelstad, has a lot to do with where we’ve just been in our quest for lead-free manufacturing. He also offers his view on the natural order of the evolution of personal political persuasions.

A Conversation (and Day) with Joe Fjelstad, Part 1

I-Connect007 Publisher Barry Matties and industry veteran Joe Fjelstad, CEO and founder of Verdant Electronics, met recently to spend a day together enjoying the Evergreen Aviation & Space Museum (home of the Spruce Goose), located in the Oregon community of McMinnville. Their conversation ebbed and flowed between a wide variety of topics, from the electronics industry, to political shenanigans and the “war against failure.” In Part 1 of this multi-part series, Fjelstad introduces his “war against failure” idea, and what went terribly wrong in the advent of lead-free manufacturing.

Zentech: Expanding EMS Solutions and Supporting Innovation

Zentech CEO and President Matt Turpin sat down with I-Connect007 Publisher Barry Matties recently for a wide-ranging discussion of the state of both domestic and global manufacturing, and Zentech’s recent acquisition that will significantly expand the company’s capabilities. They also focused on supply chain issues, automation, regulations, and the importance of STEM education in the U.S.

Zentech’s John Vaughan on the Mil/Aero Sector: “It’s Headed Up”

I-Connect007 Publisher Barry Matties and Zentech’s John Vaughan had a chance to discuss industry concerns within the mil/aero segment at IPC APEX EXPO 2015. The two also shared thoughts on the space industry, and Vaughan detailed Zentech’s involvement with National Manufacturing Day, a nationwide effort focused on STEM (Science, Technology, Engineering and Math) that simultaneously brought high school students together with 1,600 manufacturing companies from around the U.S.

UTC Aerospace Systems’ Lead PCB Designer Presents at Designer Day

I-Connect007 Guest Editor Kelly Dack sat down with Stephen V. Chavez, lead electrical designer for UTC Aerospace Systems, at IPC APEX EXPO Designer Day, to discuss Chavez’s presentation at the event. Chavez, who provides leadership to a global team of PCB designers, spoke on the importance of workplace communication with international teams.

Insitu: Moving Mountains in a Mountain Community

Nearly 800 employees build and support Insitu’s UAS line of ScanEagles, Integrators and ground stations. Boeing’s cameras captured the first images inside of Insitu’s new production facility, Eagle Point. Watch the video for a peek inside and learn more about where high-tech meets mountain height.

IPC's 2015 Technology Roadmap for the Electronics Industry

The 2015 edition of IPC's International Technology Roadmap for Electronic Interconnections is newly launched. Jack Fisher and Marc Carter explain what goes into putting it together, and how engineers and managers can use it to give an operational perspective on trends and developments in the next 2-5 years.

Multek CTO Excited About the Challenges of the Fast-Moving Wearables Market

I-Connect007 Publisher Barry Matties and recently-appointed Multek CTO Dr. Joan Vrtis sat down at IPC APEX EXPO to discuss the rapidly evolving wearables market, especially for medical, and the myriad questions that must be addressed. Other topics include Multek’s contribution to the wearables industry and what it sees as the main challenges to putting their circuits into various applications.

Quality Assurance Through Testing

The PCB Magazine columnist Todd Kolmodin of Gardien Services discusses the challenges related to the electrical testing of high-density PCBs, and what is required to meet IPC and military specifications.

Japan’s Thermosetting Plastics Association Represents at IPC APEX EXPO 2015

At the International Reception, held opening night of IPC APEX EXPO 2015, I-Connect Technical Editor Pete Starkey made the rounds and found some visitors from Japan, namely, Kazutaka Masaoka, from Thermosetting Plastics Association (JTPIA). In this brief interview conducted amongst the reception attendees, Masaoka-san and Starkey discuss Japanese vs. North American circuit board quality and business trends.

Ready to Hire! Blackfox Provides IPC Class 3 Training to Veterans

I-Connect007 Publisher Barry Matties caught up with Al Dill, president and CEO of Blackfox Training Institute, for an in-depth discussion on Blackfox's expansion plans for North America (Tempe, Arizona and Guadalajara, Mexico) and Malaysia (Penang). Dill also describes the highly successful veteran’s training program, which is being spearheaded at the Blackfox headquarters in Longmont, Colorado.

Ingredients for Success at All Flex

Dave Becker from All Flex talks with guest editor Kelly Dack about the five Keys for success in PCB manufacturing, It’s not just the technology! You have to spend time on corporate culture. The five key ingredients are…

Drive a Car? You Can Fly a Typhoon!

The EIPC conference delegates see Eurofighter assembly at Airbus Defence and Space. The major attraction was the opportunity to see the final assembly line for Eurofighter Typhoon multi-role combat aircraft destined for the German Air Force. Editor Pete Starkey has a post-show review.

Enhancing Thermal Performance in Embedded Computing for Ruggedized Military and Avionics Applications

Embedded computing systems used in many military and avionics applications are trending toward higher heat fluxes, and as a result performance is being hindered by thermal limitations. This article outlines a series of passive thermal improvements that are easily integrated into legacy systems and can provide a 3-4x increase in dissipated power.

Rockwell Collins’ New RSR Transforms Customer Devices for Military

Rockwell Collins’ new Remote Secure Receiver, which was recently ordered by the Battlefield Airmen Office of the Air Force Special Operations Command, is the first of its kind and features the world’s smallest, lowest power, protected, secure and trusted military Selected Availability Anti-Spoofing Module (SAASM) GPS solution.

GD Digital Modular Quadruples Navy Network Comm Capacity

Built using open architecture standards, the DMR radios will continue to provide improved functionality and interoperability while accommodating next-generation communications waveforms like MUOS, the Integrated Waveform and future advanced network communications waveforms.

CES 2015: Preview and Predictions

Looking back over the last five years of CES and analyzing predictions and items featured by the large exhibitors, you'd likely assume the 2015 show would feature more advanced 3D TVs, as they were predicted to take over the market...wrong!

A Conversation with Canice Chung, TTM Technologies

We had the opportunity to sit down with Canice Chung, Executive Vice President of TTM Technologies, Inc. to discuss the current trends and challenges of PCB Manufacturing in China.

I-Connect007 Announces Exclusive Interview

"As you can imagine, we are quite excited about this opportunity. It's not every day you get a chance to speak with an American legend," said I-Connect007 Publisher Steve Gold. "We are honored that he accepted our invitation."

IPC APEX EXPO 2022 Show & Tell Magazine Available Now

Welcome to the 2022 edition of Real Time with... IPC APEX EXPO 2022 Show & Tell Magazine! Inside the industry’s only publication dedicated to in-depth coverage of IPC APEX EXPO, readers will find compelling interviews with award winners, show notes from our technical staff, thoughts from emerging engineers, photos capturing the excitement of exhibitors and attendees to be back in person, and much more.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

There is, increasingly, a sense of returning to “normal” daily life where I live. Of the state’s population, 35% have been immunized against coronavirus as of this week. Lockdowns are lifted, schools have partially reopened, and even some offices are staffing back up.