RapidScat Team Investigating Power System Anomaly
September 12, 2016 | NASAEstimated reading time: 2 minutes
Mission managers at NASA's Jet Propulsion Laboratory, Pasadena, California, and NASA’s Marshall Space Flight Center, Huntsville, Alabama, are assessing two power system-related anomalies affecting the operation of NASA’s ISS-RapidScat instrument aboard the International Space Station. RapidScat measures surface wind speeds and directions over the ocean.
RapidScat is currently deactivated and in a stable configuration. A RapidScat project anomaly response team has been formed, working in conjunction with the space station anomaly response team. RapidScat will remain deactivated as the investigation continues.
On Aug. 19, the RapidScat team was notified by the International Space Station payload operations center at Marshall that the station’s Columbus Module experienced an anomaly with one of the two units aboard the station that distribute electrical power to the module. The anomaly resulted in the loss of power to several payloads aboard the space station, including RapidScat. Later that day, as JPL mission managers attempted to reactivate RapidScat, one of the outlets on the power distribution unit experienced an electrical overload. That outlet powers the station’s RapidScat, High-Definition Earth Viewing Experiment (HDEV) and Solar Monitoring Observatory (SOLAR) payloads.
On Aug. 23, the crew manually isolated RapidScat’s external payload site from its Columbus module power circuit. Ground teams then successfully restored power to the affected power distribution unit outlet, and SOLAR and HDEV powered up successfully, with no sign of electrical overload. This action isolated the outlet overload to the RapidScat site. It is not yet known if the fault is on the Columbus or RapidScat side of the power supply interface.
Mission managers are handling the incidents as two separate anomalies: loss of power to multiple payloads connected to the power distribution unit, and the electrical overload on the unit’s outlet during the attempted reactivation of RapidScat.
RapidScat’s survival heaters are currently on (the heaters receive power from a different Columbus power circuit). The heaters are designed to keep the instrument within allowable flight temperatures indefinitely.
RapidScat, launched on Sept. 21, 2014, was developed as a speedy and cost-effective replacement for NASA’s QuikScat satellite. RapidScat’s all-weather measurements of ocean surface wind speed and direction contribute to improved weather and marine forecasting, including hurricane monitoring, as well as to climate studies.
ISS-RapidScat is a partnership between JPL and the International Space Station Program Office at NASA’s Johnson Space Center, Houston, with support from the Earth Science Division of NASA's Science Mission Directorate, Washington. Other mission partners include the Kennedy Space Center, Florida; NASA Marshall; the European Space Agency; and SpaceX.
Suggested Items
Orbit International Electronics Group Reports Bookings for February 2024 in Excess of $2,000,000
03/14/2024 | Globe NewswireOrbit International Corp., an electronics manufacturer and software solution provider, announced that its Electronics Group (OEG) reported bookings for the month of February 2024 in excess of $2,000,000.
onsemi Aligns Business Groups to Expand Product Portfolio and Accelerate Growth
03/13/2024 | onsemionsemi announced the formation of the Analog and Mixed-Signal Group (AMG) which will be led by newly appointed group president, Sudhir Gopalswamy.
RTX’s Collins Aerospace Completes Demonstration with Parasanti on Launched Effects Technology
03/11/2024 | RTXRTX announced its Collins Aerospace business completed a successful digital demonstration with Parasanti on Collins’ RapidEdge™ Mission System for Collaborative Uncrewed Launched Effects (LE).
CE3S Offers PACE’s ADS200 AccuDrive Soldering Station with TD-200 & 3 Tip Bundle
03/04/2024 | CE3SCumberland Electronics Strategic Supply Solutions (CE3S), a leading provider of quality goods and services, is pleased to offer PACE's ADS200 AccuDrive Soldering Station. Designed for serious cell-phone repairers, electronics techs, engineers, DIYers, and production solder techs, the ADS200 is a high-power yet cost-effective soldering solution that delivers world-class performance and reliability.
Cadence Continues ‘Left Shift’ of SI Functions
02/29/2024 | I-Connect007 Editorial TeamAt DesignCon, the I-Connect007 Editorial Team met with Brad Griffin, product marketing group director for the System Analysis Group at Cadence Design Systems. Brad explains how this analysis tool enables designers to address SI and PI issues early in the design process, before they become costly errors, and why he believes his late co-worker Dennis Nagel would be proud to see his efforts come to fruition.