Fabrication Drawings and Electrical Test— Reading the Fine Print
February 12, 2016 | Todd Kolmodin, Gardien ServicesEstimated reading time: 1 minute
When a new PCB design is born, designers envision what the product will provide when completed. Whether the product is for the consumer, aerospace, military, medical or countless other markets, the designers—or more likely, the customers—expect certain deliverables on the commodity they wish to purchase. To provide the desired functionality of the product design, engineers specify these deliverables on blueprints (prints) or fabrication drawings (fab drawings). These documents are the recipe for the manufacturing requirements of the given product.
A multitude of information is provided in these documents. In most cases the designers do not know the specific processes involved that satisfy their requirements, nor do they have to. They specify their requirements on the fab drawing and allow the PCB manufacturer to use the necessary processes to supply the final product, and herein lies the problem. Some complex designs could have fabrication drawings exceeding 20 pages, and may include requirements ranging from which raw materials are to be used to what type of anti-static packaging is required for shipping.
For this discussion, we will focus on how these documents pertain to electrical test (ET). In most fabrication drawings, many pages are graphical in nature and depict special dimensional or mechanical attributes, while others show drill/cutter requirements, plating requirements, special layup instructions, and almost always a note(s) page. Should ET read the entire package? Yes. Why? Because many times there can be mechanical attributes that will influence how the final product can be tested.
Editor’s Note: This article originally appeared in the January 2016 issue of The PCB Magazine.
Suggested Items
Northrop Grumman Honors Suppliers for Excellence
03/14/2024 | Northrop GrummanNorthrop Grumman Corporation honored more than 70 suppliers for their outstanding contributions in 2023. In an annual recognition event, the companies included women-, minority- and veteran-owned small businesses as well as those operating in underdeveloped areas.
Cicor Acquires TT Electronics IoT Solutions
03/04/2024 | Cicor Technologies Ltd.The Cicor Group has signed an agreement to acquire TT Electronics IoT Solutions Ltd, with three production sites in the UK and China.
AEM, Texas Aerospace Technologies Bolster Partnership for Latin America
02/26/2024 | AEM Corp.Canadian avionics manufacturer, Anodyne Electronics Manufacturing Corp. (AEM), is pleased to announce a partnership expansion with Texas Aerospace Technologies, a subsidiary of Texas Aerospace Services, to add AEM’s new MTP136D modern panel-mount P25 VHF FM Forest Service radio to its lineup of product offerings for their Latin American customers.
RTX's Collins Aerospace to Provide Air India with Avionics Hardware
02/22/2024 | RTXCollins Aerospace, an RTX business, has been selected by Air India for a full suite of avionics hardware catering to the airline's expanding Boeing 737 MAX fleet.
BAE Systems Secures Regulatory Approvals for Acquisition of Ball Aerospace
02/14/2024 | BUSINESS WIREFurther to the announcement of 17 August 2023, BAE Systems has now received the necessary regulatory approvals and will be executing steps in the coming days to complete the acquisition of Ball Aerospace from Ball Corporation.