Mr. Laminate Tells All: Who Would Like a Mil-Spec Audit?

Reading time ( words)

When I signed my name on a certificate of compliance for MIL-S-13949 as a quality manager, I could have gone to jail if anything had been less than as described in the standard. Now there seems to be a small group of manufacturers that will certify to anything that the customer wants. In some cases the test equipment is not even available on site. The supply chain is now suspect without any validation activity. OEMs have resorted to conducting audits themselves.       

The IPC was approached by a number of OEMs and EMS facilities that indicated that the supply chain, if not broken, was clearly suspect, weakened, and not to be trusted. More than 85% of the OEMs and EMS businesses contacted indicated that they would like to see some kind of certification and validation process similar to what DSCC (Defense Supply Center Columbus) used to supply in the 1980’s and 1990’s. In the past two years, IPC has developed a program for a Qualified Manufacturers List (QML) for the following documents:       

Once a company has arranged for a validation services review, an IPC auditor will arrive with a complete checklist for the specific standard of interest. For some standards, a test coupon for the tier/class of product may need to be produced and tested. It is important to note that this is a process based audit and not a documentation audit as would be performed by an ISO-9000 type audit body. All information and all test results are completely confidential. The only time that something is published is when a company successfully completes the audit and testing. The successful company is put on the IPC Validation Services QML. The listed company is free to use the “certification and listing” in their advertising. The listing is generally for three years with follow-up audits conducted in years two and three. If coupons are required, these are also periodically submitted over the course of the listing.

In reality looking back, the milspec standards, the audits and the mountains of testing actually kept the supply chain honest. There was integrity and confidence that if you received materials with a signed certificate of analysis, that the laminates/prepregs and PCBs would actually be of a higher and more consistent quality. Sure there were still failures and some defective materials shipped, but not at the rates seen today. The new validation program from the IPC presents a significant step in providing the same confidence again to the electronics supply chain. The validation services programs are offered to companies on a worldwide basis.

Any company that is interested in the validation services program should contact Randy Cherry.

Doug Sober is the president of Essex Technologies Group and may be reached by clicking here.



Suggested Items

What It Takes to Be a Milaero Supplier, Part 2

03/24/2020 | Anaya Vardya, American Standard Circuits
The decision to pursue military and aerospace (milaero) certification impacts every facet of the organization, and not every shop is prepared to make this transformation. In Part 2, Anaya Vardya focuses on what it takes to be a milaero supplier in the areas of engineering and CAM.

Requirements of Being a MIL-certified Shop

11/12/2019 | Barry Matties, I-Connect007
Barry Matties speaks with American Standard Circuits’ VP of Business Development David Lackey, who has nearly 40 years of experience producing PCBs for the mil/aero market. David talks about what it’s like being a MIL-certified shop and the stringent quality and reporting requirements that it entails.

How to Dismantle a Nuclear Bomb

10/01/2019 | Peter Dizikes, MIT News Office
How do weapons inspectors verify that a nuclear bomb has been dismantled? An unsettling answer is: They don’t, for the most part. When countries sign arms reduction pacts, they do not typically grant inspectors complete access to their nuclear technologies, for fear of giving away military secrets.

Copyright © 2020 I-Connect007. All rights reserved.