CACI Announces Successful Demonstration of Optical Intersatellite Links in Low Earth Orbit
May 20, 2022 | CACI International Inc.Estimated reading time: 2 minutes
CACI International Inc announced it successfully demonstrated space to space optical communications links in low earth orbit (LEO) in partnership with the Defense Advanced Research Projects Agency (DARPA) and the Space Development Agency (SDA) as part of the Mandrake II program.
Mandrake II is a joint risk-reduction program with DARPA, SDA and the Air Force Research Laboratory’s Space Vehicles Directorate (AFRL/RV) to evaluate the pointing, acquisition, and tracking algorithms that allow for optical communication terminals to establish and maintain high-speed communication links in the upcoming Blackjack and SDA Transport and Tracking Layer constellations. This successful test, completed using CACI’s CrossBeam free-space optical terminals, is the first step in establishing more secure, space-based communications networks for defense agencies using more powerful, efficient technology that can transmit more data, faster.
In December 2021, CACI acquired California-based SA Photonics to address a broader market spanning high-end manned flight programs to the proliferated LEO market. The combined companies offer the most advanced photonics engineering and manufacturing capabilities in the U.S. with three major manufacturing facilities in California, Florida, and New Jersey.
John Mengucci, CACI President and Chief Executive Officer, said, “Our national security depends on advanced, secure technology that enables modernized networks and enhanced intelligence systems for our warfighters using small satellites to operate at the speed of relevance. Through the acquisition of SA Photonics, our joint technology and manufacturing capabilities have enabled this successful milestone. In partnership with our mission customers, we are on the path to supporting the contested space domain with faster, more secure satellites.
The Optical InterSatellite Links (OISLs) were established using CrossBeam free-space optical terminals currently on orbit, developed by SA Photonics, with satellites that are specifically aimed at demonstrating and supporting a communication capability for the Department of Defense’s proliferated LEO (p-LEO) National Defense Space Architecture (NDSA).
The CrossBeam OISLs on Mandrake II successfully established an optical link during a 40+ minute test on April 14. The link demonstrated closed loop tracking and data transfer over a 100+ km link distance, with more than 200 gigabits (Gb) of data transmitted and received.
The CrossBeam technology provides satellite crosslinks and bi-directional satellite-to-earth links via low complexity systems, minimizing size, weight, power, and cost.
“Working with our partners on this industry milestone, we are proud to support the customer mission with this proliferated LEO class of low SWaP-C optical communication terminal,” said CACI SA Photonics Chief Operating Officer Mustafa Veziroglu. “Building on the success of the Mandrake II program, the highly-manufacturable second-generation CrossBeam optical terminal is now ready to move into volume production in our expanded Los Gatos, California campus and new manufacturing facility in Orlando.”
Suggested Items
KIC’s Miles Moreau to Present Profiling Basics and Best Practices at SMTA Wisconsin Chapter PCBA Profile Workshop
01/25/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, announces that Miles Moreau, General Manager, will be a featured speaker at the SMTA Wisconsin Chapter In-Person PCBA Profile Workshop.
The Drive Toward UHDI and Substrates
09/20/2023 | I-Connect007 Editorial TeamPanasonic’s Darren Hitchcock spoke with the I-Connect007 Editorial Team on the complexities of moving toward ultra HDI manufacturing. As we learn in this conversation, the number of shifting constraints relative to traditional PCB fabrication is quite large and can sometimes conflict with each other.
Standard Of Excellence: The Products of the Future
09/19/2023 | Anaya Vardya -- Column: Standard of ExcellenceIn my last column, I discussed cutting-edge innovations in printed circuit board technology, focusing on innovative trends in ultra HDI, embedded passives and components, green PCBs, and advanced substrate materials. This month, I’m following up with the products these new PCB technologies are destined for. Why do we need all these new technologies?
Experience ViTrox's State-of-the-Art Offerings at SMTA Guadalajara 2023 Presented by Sales Channel Partner—SMTo Engineering
09/18/2023 | ViTroxViTrox, which aims to be the world’s most trusted technology company, is excited to announce that our trusted Sales Channel Partner (SCP) in Mexico, SMTo Engineering, S.A. de C.V., will be participating in SMTA Guadalajara Expo & Tech Forum. They will be exhibiting in Booth #911 from the 25th to the 26th of October 2023, at the Expo Guadalajara in Jalisco, Mexico.
Intel Unveils Industry-Leading Glass Substrates to Meet Demand for More Powerful Compute
09/18/2023 | IntelIntel announced one of the industry’s first glass substrates for next-generation advanced packaging, planned for the latter part of this decade.