iNEMI: Packaging Tech Topic Series Considerations for Application-Specific, General Qualification of Electronics
April 27, 2022 | iNEMIEstimated reading time: Less than a minute
The qualification of an electronic device requires consideration of the application life cycle profile (stresses from environments and operation) and the relevant failure mechanisms of the device exposed to the application stresses. To fully characterize the performance in the application, the qualification must also account for the failure distribution of the various relevant failure mechanisms and the synergistic effects of the different mechanisms.
In this webinar David Locker, who has served as an electronic components engineer supporting U.S. Army programs for more than 30 years, will discuss methods to address these factors in determining qualification and performance characterization requirements. He will also talk about determining whether a given set of qualification data meets a particular application requirement.
This webinar is free and open to industry; advance registration is required, for more information, visit iNEMI’s website.
May 17, 2022
9:00-10:00 a.m. EDT (Americas)
3:00-4:00 p.m. CEST (Europe)
9:00-10:00 p.m. CST (China)
Suggested Items
KIC’s Miles Moreau to Present Profiling Basics and Best Practices at SMTA Wisconsin Chapter PCBA Profile Workshop
01/25/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, announces that Miles Moreau, General Manager, will be a featured speaker at the SMTA Wisconsin Chapter In-Person PCBA Profile Workshop.
The Drive Toward UHDI and Substrates
09/20/2023 | I-Connect007 Editorial TeamPanasonic’s Darren Hitchcock spoke with the I-Connect007 Editorial Team on the complexities of moving toward ultra HDI manufacturing. As we learn in this conversation, the number of shifting constraints relative to traditional PCB fabrication is quite large and can sometimes conflict with each other.
Standard Of Excellence: The Products of the Future
09/19/2023 | Anaya Vardya -- Column: Standard of ExcellenceIn my last column, I discussed cutting-edge innovations in printed circuit board technology, focusing on innovative trends in ultra HDI, embedded passives and components, green PCBs, and advanced substrate materials. This month, I’m following up with the products these new PCB technologies are destined for. Why do we need all these new technologies?
Experience ViTrox's State-of-the-Art Offerings at SMTA Guadalajara 2023 Presented by Sales Channel Partner—SMTo Engineering
09/18/2023 | ViTroxViTrox, which aims to be the world’s most trusted technology company, is excited to announce that our trusted Sales Channel Partner (SCP) in Mexico, SMTo Engineering, S.A. de C.V., will be participating in SMTA Guadalajara Expo & Tech Forum. They will be exhibiting in Booth #911 from the 25th to the 26th of October 2023, at the Expo Guadalajara in Jalisco, Mexico.
Intel Unveils Industry-Leading Glass Substrates to Meet Demand for More Powerful Compute
09/18/2023 | IntelIntel announced one of the industry’s first glass substrates for next-generation advanced packaging, planned for the latter part of this decade.