Dymax 9771 Conformal Coating is Now NASA MAPTIS Listed

Reading time ( words)

Dymax, leading manufacturer of rapid light-curing materials and equipment, is pleased to announce that its one-of-a-kind light-curable conformal coating, 9771, for use on critical printed circuit boards in missiles, satellites, and spacecraft has received a prestigious NASA MAPTIS material number, 09841.

As a result, 9771 is now recorded in the approved materials database used by NASA and suppliers. The importance of this listing is that NASA has independently verified the coating to meet ASTM E595 and allows people looking for low outgassing materials to find the product more easily.

NASA low outgassing ASTM E595 test method is a screening procedure to determine the volatile content of materials when exposed to a vacuum environment. The test is run at 125°C (257°F) under a 5 X 10-5 Torr vacuum for 24 hours. The Total Mass Loss (TML %) and Collected Condensable Volatile Material (CVCM %) are measured. CVCM is of particular interest as it might be indicative of loss of electrical continuity, or some other effect caused by material being deposited where it is not intended.

In conjunction with the NASA material number, dispense guidelines have been established to ensure that a consistent coating thickness of 50.8-101.6µm (0.002-0.004”) is achieved. Dymax recommends applying the conformal coating using a PVA Delta 6 Selective Coating/Dispense System with FCS300 series valve. The Dymax team of Applications Engineers are available to customers through every step of their project to ensure successful outcomes.

9771 is a reworkable conformal coating that cures with light and moisture to ensure material that flows underneath components on PCBs fully cures. The product has low ionic content compliance with MIL Std 883 Method 5011, UL 94 V0 flammability rating, and is UL 746E recognized.


Suggested Items

Material Management and Control

11/21/2022 | Davina McDonnell, Cogiscan
In a market that is trying to catch up with increasing customer demands and quickly ship products out the back door, no electronics manufacturing plant can afford to lose any time or resources during the production process. Manufacturers are forced to do more with less and get the most out of every single precious component.

Modern Inventory Management Secrets

11/07/2022 | Michael Ford, Aegis Software Corp.
Inventory management should be simple; after all, it is how many of us learned to count. ERP solutions have become complex yet cannot solve our immediate supply-chain and manufacturing challenges unaided. It’s time to unfold the root-causes behind key issues and reveal the secrets for success in modern inventory management which have a significant impact on any manufacturing business.

Axiom Inspired by Industry Challenges

09/20/2022 | Michael Schindele, Axiom
After living through more than two years of the pandemic, we are very aware of the issues facing the electronics industry. We have witnessed months of factory shutdowns, labor disruptions due to a reduced workforce, and country, regional, and citywide COVID regulations and shutdowns. I will describe some of the issues we’ve been facing, and then explain how we learned to be creative and look for the silver linings in these disruptions.

Copyright © 2022 I-Connect007 | IPC Publishing Group Inc. All rights reserved.