EnerSys ABSL Li-ion Batteries Successfully Launch on NASA James Webb Space Telescope
December 30, 2021 | GlobeNewswireEstimated reading time: 1 minute
EnerSys, the global leader in stored energy solutions for industrial applications, is proud to announce the successful integration of its ABSL Lithium-ion (Li-ion) batteries into the National Aeronautics and Space Administration (NASA) James Webb Space Telescope launch. As the successor to the iconic Hubble Space Telescope, Webb is the largest and most powerful space science telescope ever built, and is the result of an International collaboration between NASA and its partners the European Space Agency (ESA) and the Canadian Space Agency (CSA) and prime industry lead, Northrop Grumman. Webb launched on December 25th, 2021, was sent into orbit upon an Ariane 5 rocket from Europe’s Spaceport in French Guiana and will serve as the premier space observatory for the next decade.
EnerSys was selected by Northrop Grumman in 2012 to provide ABSL™ 8s44p rechargeable Li-ion batteries with disconnect relays for Webb, and then awarded a second contract in 2018 for an additional 8s44p battery, tailored to incorporate alternate cell chemistry. ABSL™ Li-ion batteries were selected for this mission due to their stringent design and structural and thermal performance to deliver long life, quality and reliability that successful space missions demand.
“EnerSys is pleased to play such an influential role in the success of the James Webb Space Telescope project,” said Mark Matthews, EnerSys Senior Vice President, Specialty – Global. “It has been almost ten years since EnerSys was awarded the contract for these batteries to power this mission and our journey began with Webb. We are beyond excited to be part of a mission of this magnitude and to see it launch successfully.”
Webb will travel approximately 930,000 miles (1.5 million km) from Earth, toward the relatively gravitationally stable Earth-Sun Lagrange Point 2 and will study every phase of cosmic history from within our solar system to the most distant observable galaxies in the early universe.
Suggested Items
Connect the Dots: Designing for Reality: Prioritizing Manufacturability
04/11/2024 | Matt Stevenson -- Column: Connect the DotsRealistic PCB designs should prioritize manufacturability and reliability of the PCB as well as meet the other design requirements. To do so, one must account for the production variables associated with individual manufacturing partners. Understanding and creating robust PCB designs, especially in terms of board manufacturing, requires a lot of attention to detail. When more detail is included in the design, the manufacturing process goes more smoothly, and process yields are higher.
TSMC Arizona, U.S. Department of Commerce Announce up to US$6.6 Billion in Proposed CHIPS Act Direct Funding
04/09/2024 | TSMCTSMC announced that the U.S. Department of Commerce and TSMC Arizona have signed a non-binding preliminary memorandum of terms (PMT) for up to US$6.6 billion in direct funding under the CHIPS and Science Act.
iNEMI Announces Results of Board of Directors Election
04/08/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) announces results from its recent Board of Directors election. The consortium's members have added three new directors and re-elected three incumbents, effective April 1, 2024.
IPC APEX EXPO 2024: LPKF—Debunking Depaneling Industry Perceptions
03/27/2024 | Nolan Johnson, I-Connect007In this audio interview, listen to Jake Benz discuss advances in laser depaneling at LPKF. Thanks to advances in laser technology, perceptions about laser depaneling are changing from a low-speed, specialized process to a high volume process suitable for production manufacturing. Benz elaborates on some of the development and engineering that went into creating their latest, most capable depaneling machines.
Seeking Employment: Meet Gary Turner
03/25/2024 | Barry Matties, I-Connect007Meet Gary Turner, a recent graduate from the University of Texas at Dallas with a bachelor’s degree in mechanical engineering and a master’s in material science and engineering. He is currently seeking employment in the industry. The following interview will allow you to learn about Gary and see if he might be a good candidate for a position you are looking to fill.