Test and Inspection: Far Beyond Opens and Shorts


Reading time ( words)

Gardien Vice President Todd Kolmodin talks about test and inspection market drivers from his perspective as a test service provider. Andy Shaughnessy and Happy Holden go down the “microvia rabbit hole” with Todd, as well as explore how OEM design requirements are driving test and inspection functionality and processes. When board layer counts and feature densities force longer test times, the tradeoffs to profitability for manufacturers become time and accuracy. Minimizing time while maximizing accuracy calls for new methods, which Kolmodin explains. 

Andy Shaughnessy: Todd, will you give us an overview of test and inspection?

Todd Kolmodin: We’re seeing that the way to compete right now is bundling. In test and inspection, you have requirements from a customer now that are far beyond just what I need to test the board for opens and shorts.

When the requirements now come in, we want the open and shorts. That’s the “throw it on the table” given. But then they say, “We have some buried passives, some impedance, then some buried inductives, and HiPot; we have all these things that are added on there. Maybe they’ve moved into high voltage design. They want 4-wire Kelvin high-resolution testing. They want buried resistive testing because the Ohmega™-ply layered technology has really matured, and a lot of people are doing it. We test both in sub part innerlayer or final and we can figure out internal matrices of buried series resistance, parallel resistance, and combinational resistance.

We have integrated multiple tests into the same equipment and it’s a way we can stay competitive and provide a one-stop test service or quality assurance service without having to buy all kinds of equipment. There are people buying grid testers and flying probes and then you’re buying TDR equipment and machines for doing inductions and such like that. That’s how we’re seeing it.

Shaughnessy: What do you see going on with test and inspection? The good, the bad, the challenging?

Kolmodin: We’re seeing more requirements from some of the manufacturers and that has forced us to invent ways to do things differently. Some of our equipment now can provide the TDR, the standard test, the buried inductance testing, buried capacitance testing, and buried resistive testing all on one machine so you don’t need a lot of other equipment. You have to go this way to stay competitive because you can only cut your margins so far; after a while you won’t compete anymore and you still need to pay your employees.

We are seeing some onshoring again. We are seeing a lot more of the hotshot stuff under ITAR agreements, and some of the military applications. Overall, I think we’re getting stronger again but the function for success is definitely automation. I’m speaking for test in general, not just us.

Happy Holden: Todd, are you testing bare boards or assembled boards?

Kolmodin: With very small exceptions, it’s all bare board level.

Holden: So, the test is getting more complex because the printed circuit itself is getting more complex with newer technologies?

Kolmodin: Exactly. Your standard 8-, 10-, 12-, 16-, and 20-layer boards—we see them up to 30+ when you get into backplane. These engineers figured out some time ago how they can bury certain components in the board using different types of material.

The problem is when you have some of it buried in the board and some buried components behave like electrical faults. As a resistive network, it could be higher than the continuity threshold required. Similarly, if you have capacitance built in, you could get charge time and leakage which will screw up the results of a standard test. You must be able to provide both tests in one session. It gets tricky.

To read this entire conversation, which appeared in the November 2021 issue of PCB007 Magazine, click here.

Share




Suggested Items

Integra: Redefining Die Prep in the U.S.

01/25/2023 | Matt Bergeron, Integra
Integra is one of the largest and most experienced semiconductor die prep, assembly, test, and qualification facilities in the United States, with locations in both Wichita, Kansas, and Silicon Valley. At the recent IPC Advanced Packaging Symposium, Integra was invited to present information about how we meet our customers’ specific needs.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

12/09/2022 | Andy Shaughnessy, Design007 Magazine
We’re into December, and the new year is around the corner. Things are looking pretty good for our industry. Trade show attendance is back up to pre-COVID levels, and a lot of companies are having banner years. Has the virtual trade show gone the way of the dodo bird? Let’s hope! This week, our must-reads include articles and news items on the decline of R&D, STEM education for kids, why vias do not heat up, the need for more DFT, and the lack of movement toward intelligent data transfer. Designers just love their Gerbers, but Dana Korf has a few ideas about how to make Gerbers obsolete.

Millennium Circuits on The Move

10/31/2022 | Andy Shaughnessy, Design007 Magazine
I recently met with Daniel Thau, CEO of Millennium Circuits Limited, at PCB West. This Pennsylvania-based PCB distributor has been on an expansion path lately, so I asked Daniel to introduce us to MCL and explain where the company is headed. As Daniel says, it’s all about impacting the world in a positive way.



Copyright © 2023 I-Connect007 | IPC Publishing Group Inc. All rights reserved.