Agfa: Staying Ahead of the Technology Curve


Reading time ( words)

Matties: So there are three areas: the solder mask, the legend, and what is the third area?

Van Dam: The etch resist. That's commercial, so there we have some interesting projects. Currently, the majority is in the chemical milling market. But we are also testing in the PCB application.

Matties: Is there anything that we haven't talked about that we should share with our readers?

Van Dam: Yes, in addition to the products for the PCB market, Agfa also has products for printed electronics. Our Orgacon range has products based on conductive polymers and nano silver. We have a nano silver inkjet ink commercially available. This goes a step further in additive technology.

Matties: It's really a booming area. Nano Dimension is doing this kind of technology with their Dragonfly and they were just approved by the U.S. military for this technology, I believe. It really paves the way for so many of the other companies to step in, because there is now some proven ground. And then the presentations that we're seeing here in which they’re printing circuits on the molded surfaces for automotive really changes the whole landscape of circuit boards. What is your take on that?

Van Dam: We are also highly focused on that; we want to be there for the future, so we know this is an important area and we have a significant team looking into these type of applications.

Matties: We are planning an issue on megatrends, and one of the megatrends that we see is 3D printing. Not just 3D electronics, but 3D printing in connection with 3D electronic printing, because when you can put the power of creation on the desktops of individuals, it changes the world. When the personal computer landed in the hands of the general population, look what happened. And I think we're going to see the same thing and same innovation with 3D printing.

Van Dam: Agreed. 3D printing and integrating electronics in the shapes like we saw today is quite interesting.

Matties: It is very exciting. Thank you for your time and congratulations on your new position as global sales manager.

Van Dam: Thank you very much.

 

Share

Print


Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

11/26/2021 | Nolan Johnson, I-Connect007
If you’re in the United States like I am, and if you celebrated with a traditional Thanksgiving dinner, like my family did, then you just might have fallen asleep sitting up in a chair (or in my case, stretched out on the couch) and missed some of the highlights in the news this week. Never fear, I woke up early to bring the top five news items you should know for this week. We have industry bookings and sales news from IPC, some news from the flex sector, an explanation of induction lamination from Happy Holden, and two different takes on “sustainability.”

New Methods for Quantifying PCB Design Weaknesses and Manufacturing Challenges

11/18/2021 | Nolan Johnson, I-Connect007
Gerry Partida explains, "The industry is at a new point in evolving how we look at building boards. Our industry has historically built boards and then tried to find a test for them. Then, when they found a test for it, they figured out that it needed to be analyzed before they built the board. We did this with electrical test. We built boards and down the road, as people started asking, “Why am I buying bad boards? We should electrically test them,” electrical test was introduced, reluctantly, into the test part of manufacturing printed circuit boards by suppliers or fabricators. Then they embraced it. But when we started testing boards, we did comparison tests."

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

04/30/2021 | Nolan Johnson, I-Connect007
This week’s biggest news came in the form of industry briefings—there were a lot of them and the news was universally positive. The news you need to read for this week includes three reports from IPC detailing: the strength and risks in the global economic recovery; a strong EMS book-to-bill ratio; and strong North American PCB sales. Zeroing in on a single company, Apple reported a significant jump in revenue.



Copyright © 2021 I-Connect007. All rights reserved.