The European Angle: Institute of Circuit Technology 43rd Annual Symposium


Reading time ( words)

Time marches on and change is inevitable. Here we are anticipating the consequences of a Fourth Industrial Revolution—new technologies are blurring the lines between physical, digital and biological worlds, with the potential to fundamentally alter the way we live, work, and relate to one another. But where and when did the Dr_Andy_Cobley.jpgoriginal industrial revolution begin? Look back 300 years, to the blast furnaces and forges of the midlands of England—the Black Country—where innovation, entrepreneurial and manufacturing skills created the world’s first industrial landscape. The Black Country Living Museum, which tells the story of that revolution, was venue for the 43rd Annual Symposium of the Institute of Circuit Technology.

ICT Chairman Dr. Andy Cobley welcomed an enthusiastic gathering of PCB professionals to network with their peers whilst enjoying an outstanding symposium programme, this year focused on aspects of design and its impact on PCB manufacturability and reliability.

Bill_Wilkie.jpgThe keynote presenter, introduced by ICT Technical Director Bill Wilkie, was Ventec Director of OEM Technology Martin Cotton, celebrating 50 years in PCB design.

Cotton held the attention of the audience for over an hour with an enthralling and action-packed account of his life and career, from modest beginnings in 1951 in Northwest London, with an education disrupted by re-location, through the 50 years since his first PCB layout as an apprentice in 1967. Included was his present-day mission to use his knowledge and experience to guide OEM customers in selecting and specifying their substrate materials so that product performance and functionality can Martin_Cotton.jpgbe optimised whilst maximising manufacturability and cost-effectiveness.

With a series of interesting and often highly amusing anecdotes, he acknowledged the people who had influenced his career and recounted many examples of design challenges he had encountered and overcome, and some of the significant innovations he had introduced. One of the most notable was the principle of “max copper,” with reference to the IBM P/S2-30 personal computer in the mid-late 1980s. He re-laid the 4-layer main board as a double-sided and re-panelised it for 2-up manufacture. And all the redundant space was occupied by a copper ground with no electrically isolated slivers. This resulted in enhanced electrical performance and improved flatness and dimensional stability, as well as reducing the amount of copper to be etched. Cotton had to be innovative in developing a technique for incorporating max copper because it was beyond the scope of the CAD systems of the time, and he used a CAM system and “negative data” to achieve it. Max copper is a feature of most current designs; regrettably, Cotton had omitted to patent the concept.

Turning to present-day design challenges, Cotton focused on new-generation high-speed materials and discussed how an understanding of the “impedance triangle” could help designers avoid making controlled-impedance lines narrower than necessary and mitigate some of the consequential effects on trace resistance and insertion loss.

Michael_Ford.jpgAs a presenter, Martin Cotton is a hard act to follow. But the ICT was privileged to welcome Michael Ford, senior market development manager with Mentor Graphics, who gave an attention-grabbing and thought-provoking performance with his analysis of the essential role of DFM in new product introduction. He began by considering issues involved in the transition from “Industry 3.0” to “Industry 4.0,” including the automation of automated processes, the computerisation of human decision-making and optimisation based on the live environment, and the significance of these issues in a Lean context. Lean was the mind-set of not doing anything you didn’t need to do, and when you did do something, doing it right-first-time without any waste.

Ford explained that the traditional electronic product ecosystem was a cycle that started and ended with market analysis: create the opportunity, design the product, lay-out the PCB, fabricate the PCB, source the components, assemble, test, ship and distribute. It was in the distribution stage of the value chain where most of the costs lay; assembly cost was trivial in comparison. For example, if smart phones were manufactured in Germany, they would cost more to make but less to distribute. But PCB design was the most critical step in the cycle, since it had an impact at every subsequent stage of the cycle, and could ultimately be responsible for missed market opportunities and loss of confidence in the product. And although simple design-rule checking would catch obvious violations, it could miss many issues which might not become apparent until further downstream—manufacture, test or, worst case, failure in the market. Therefore, more intelligent design analysis tools were vital in supporting a successful NPI process.

Does my PCB work for manufacturing? With meaningful illustrations and examples, Ford reviewed a series of design issues that could reduce yield and reliability and incur extra cost in PCB fabrication and assembly processes, describing how designs were analysed for manufacturability and how panels were created to optimise yield and material utilisation in both fabrication and assembly. Use of the right DFx (Design for Excellence) tools in the product ecocycle between PCB layout and PCB fabrication gave the OEM designer the opportunity to improve the design and the EMS provider the facility to expose concerns, as well as enabling direct data input into production tooling.

Share

Print


Suggested Items

Real Time with... IPC APEX EXPO: Taiyo Focuses on Collaboration

01/12/2022 | Pete Starkey, I-Connect007
Don Monn, Midwest regional sales director at Taiyo America, reviews the progressive adoption of inkjet solder mask technology while acknowledging that liquid photoimageable mask continues as the mainstream process, with new developments in double-sided coating and vertical drying equipment. He comments on how Taiyo’s collaborative relationships with suppliers and customers have enabled logistics to be successfully managed through difficult times.

Real Time with... IPC APEX EXPO: Burkle Has a Sharper Image

01/11/2022 | Nolan Johnson, I-Connect007
Kurt Palmer, president of Burkle North America, speaks with Editor Nolan Johnson about the latest advancements in imaging and the equipment that Burkle will be demonstrating at IPC APEX EXPO in San Diego. If you can’t make it to IPC APEX EXPO, don’t worry. We’ll be bringing you interviews with the engineers, managers and technologists who are making a difference in our industry.

Agfa Taking Leap to Digital Platform

12/13/2021 | Pete Starkey, I-Connect007
I-Connect007 Technical Editor Pete Starkey spoke with Agfa Business Unit Manager Frank Louwet ahead of last month’s productronica show in Europe. They discuss the company’s desire to reduce its carbon footprint and the benefits of this change, particularly with a move to digital inkjet printing, and describes some of the company’s newest products. As Louwet explains, "Our claim is 'Grow your business, not your footprint.' By going digital you can grow your business without having to increase your waste materials, your processing chemicals, your water, and even your floor space."



Copyright © 2022 I-Connect007. All rights reserved.