Major EPSRC Grant to Develop Gallium Nitride on Diamond Microwave Technology
February 8, 2017 | University of BristolEstimated reading time: 2 minutes
The University of Bristol has been awarded a £4.3 million grant from the Engineering and Physical Sciences Research Council (EPSRC) to lead an important new project to develop Gallium Nitride (GaN)-on-Diamond microwave technology.
This next generation technology will underpin future high power radio frequency and microwave communications, space and defence systems, paving the way towards 5G and 6G mobile phone networks and much more comprehensive radar systems. Bristol will work with a consortium of four other universities (Cardiff, Glasgow, Cambridge and Birmingham) and leading industry partners during this five-year project.
Professor Martin Kuball, from the School of Physics at Bristol, is leading this project. He said: "Global demand for high power microwave electronic devices that can deliver power densities well exceeding current technology is increasing.
"In particular Gallium Nitride (GaN) based high electron mobility transistors (HEMTs) are a key enabling technology for high-efficiency military and civilian microwave systems, and increasingly for renewable energy plants."
For example information in a mobile communication systems is transmitted as ‘0’ and ‘1’s, so-called bits, and per bit this requires a certain amount of energy. In 5G, the number of bits transmitted per second will be immense, and future systems will ask for even more; current microwave devices which are used to transmit these bits in 4G networks do not have the muscle and power needed.
The vision of this new project is to develop transformative GaN-on-Diamond HEMTs and monolithic microwave integrated circuits (MMICs), the technology step beyond current microwave devices.
Energy flows in these can be as high as the heat flux on the surface of the sun, and the diamond with its ultra-high thermal conductivity is the only material which can handle them. These devices will allow the implementation of future communications networks and radar systems with capabilities beyond what is presently possible.
Professor Kuball added: "To enable our vision to become reality, we will develop new diamond growth approaches that maximize diamond thermal conductivity close to the active GaN device area. In present research GaN-on-Diamond devices a thin dielectric layer is required on the GaN surface to enable seeding and successful deposition of diamond onto the GaN. Unfortunately, most of the thermal barrier in these devices then exists at this GaN-dielectric-diamond interface, which has much poorer thermal conductivity than desired.
"Any reduction in this thermal resistance, either by removing the need for a dielectric seeding layer for diamond growth, or by optimizing the grain structure of the diamond near the seeding, would be of huge benefit. Novel diamond growth will be combined with innovative micro-fluidics using phase-change materials, a dramatically more powerful approach than conventional micro-fluidics, to further aid heat extraction."
The outcome will be devices with a spectacular >5x increase in RF power compared to the current state-of-the-art GaN-on-silicon carbide HEMTs, presently commercially available. Alternatively and equally valuably, a dramatic 'step-change' shrinkage in MMIC or power amplifier (PA) size is possible, delivering an increase in efficiency through the removal of combining networks as well as a reduction in power amplifier cost. This represents a disruptive change in capability that will allow the realisation of new system architectures – for example, for radio frequency seekers and medical applications, and enable the bandwidths needed to deliver 5G and beyond. Reduced requirements for cooling/increased reliability will result in major cost savings at the system level.
Suggested Items
Koh Young Showcases Award-winning Inspection Solutions at SMTconnect with SmartRep in Hall 4A.225
04/25/2024 | Koh Young TechnologyKoh Young Technology, the industry leader in True 3D measurement-based inspection solutions, will showcase an array of award-winning inspection and measurement solutions at SMTconnect alongside its sales partner, SmartRep, in booth 4A.225 at NürnbergMesse from June 11-13, 2023. The following offers a glimpse into what Koh Young will present at the tradeshow:
Real Time with… IPC APEX EXPO 2024: Plasmatreat: Innovative Surface Preparation Solutions
04/25/2024 | Real Time with...IPC APEX EXPOIn this interview, Editor Nolan Johnson speaks with Hardev Grewal, CEO and president of Plasmatreat, a developer of atmospheric plasma solutions. Plasmatreat uses clean compressed air and electricity to create plasma, offering environmentally friendly methods for surface preparation. Their technology measures plasma density for process optimization and can remove organic micro-contamination. Nolan and Hardev also discuss REDOX-Tool, a new technology for removing metal oxides.
Nanotechnology Market to Surpass $53.51 Billion by 2031
04/25/2024 | PRNewswireSkyQuest projects that the nanotechnology market will attain a value of USD 53.51 billion by 2031, with a CAGR of 36.4% over the forecast period (2024-2031).
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
SMC Korea 2024 to Highlight Semiconductor Materials Trends and Innovations on Industry’s Path to $1 Trillion
04/24/2024 | SEMIWith Korea a major consumer of semiconductor materials and advanced materials a key driver of innovation on the industry’s path to $1 trillion, industry leaders and experts will gather at SMC (Strategic Materials Conference) Korea 2024 on May 29 at the Suwon Convention Center in Gyeonggi-do, South Korea to provide insights into the latest materials developments and trends. Registration is open.