New Drone to Ensure Safer Demining
December 20, 2016 | DTUEstimated reading time: 3 minutes
Researchers at DTU intend to develop a drone with magnetometers capable of mapping mines in former war zones, which will make demining more efficient and less dangerous. The project has received DKK 11 million from Innovation Fund Denmark.
Mines are usually made of magnetic steel, and the search for mines therefore often involves ‘magnetometers’—instruments capable of measuring minor magnetic deviations in the subsurface and thereby localizing the mines.
“The plan is for our drone and its unique magnetometer module to make demining more precise than the current method of using off-road vehicles on land and special divers in coastal areas. It will also minimize the risk of injuries for the people involved, as the drone can be operated from a safe position outside the mined areas,” explains Arne Døssing, Senior Research, DTU Space, who heads the project of developing the new technology.
He also believes that the new demining system could reduce the costs and time of mapping the presence of mines by more than 50 per cent.
A unique system
Arne Døssing is the originator of the idea to develop the new demining system consisting of a newly developed drone type with a frame installed underneath it, which will be specially developed by DTU Space researchers. The frame is referred to as a ‘magnetometer bird’, as the magnetometer is embedded in the frame, which is attached to the drone and hangs approx. 5-10 metres below it.
“It will be the first drone in the world to fly with a ‘bird’ underneath it. This construction is absolutely necessary to ensure the ultra-sensitive magnetometers are as close to the surface as possible, at the same time as minimizing exposure to magnetic disturbances from other instruments and from the flying drone,” says Arne Døssing.
For the same reason, the equipment designed to measure the exact position of the drone—and thus of the detected mines—is installed in the drone rather than in the ‘bird’. This takes place in close collaboration between DTU researchers and the Danish drone company Sky-Watch A/S.
The drone itself is also an innovation. It has been developed by Sky-Watch, and in addition to the ability to fly like a regular aircraft, it allows for vertical take-off and landing in the same way as a helicopter.
Great interest in efficient demining
Initially, the researchers will be focusing on the need to clear mines from World War II, before laying power cables to new offshore wind turbines. It is assumed that the number of unexploded mines from World War II hidden in the sea and on land exceeds 40,000.
Therefore, there are several parties involved in the project which are interested in applying the new technology. In addition to the drone company Sky-Watch A/S, DONG Energy is establishing many new offshore wind farms, Geo is carrying out geotechnical surveys in connection with, for example, offshore wind farms, and the Royal Danish Navy’s mine clearance service often has the dangerous task of clearing the mines.
The magnetometer drone will furthermore be tested in the mountains of Greenland, where it may have an impact on the search for mineral deposits or military waste, and it will also be tested from a vessel in relation to its ability to detect large mines in deeper waters. In both cases, the drone’s ability to take off and land vertically is significant.
Denmark to take a leading role in magnetic mapping
Over the next four years, researchers from DTU Space will develop and test the new technology. The hope is that in the long term, the technology can supplement the existing mine detection technologies, which are both expensive and inefficient. This could potentially give Denmark a leading position in relation to magnetic mapping of the subsurface.
“The global market for flexible, efficient, and precise mapping of, for instance, mines, military waste, and minerals is big. So the project will allow Danish technology companies to take a strong position in this area,” says Arne Døssing.
Suggested Items
Koh Young Showcases Award-winning Inspection Solutions at SMTconnect with SmartRep in Hall 4A.225
04/25/2024 | Koh Young TechnologyKoh Young Technology, the industry leader in True 3D measurement-based inspection solutions, will showcase an array of award-winning inspection and measurement solutions at SMTconnect alongside its sales partner, SmartRep, in booth 4A.225 at NürnbergMesse from June 11-13, 2023. The following offers a glimpse into what Koh Young will present at the tradeshow:
Real Time with… IPC APEX EXPO 2024: Plasmatreat: Innovative Surface Preparation Solutions
04/25/2024 | Real Time with...IPC APEX EXPOIn this interview, Editor Nolan Johnson speaks with Hardev Grewal, CEO and president of Plasmatreat, a developer of atmospheric plasma solutions. Plasmatreat uses clean compressed air and electricity to create plasma, offering environmentally friendly methods for surface preparation. Their technology measures plasma density for process optimization and can remove organic micro-contamination. Nolan and Hardev also discuss REDOX-Tool, a new technology for removing metal oxides.
Nanotechnology Market to Surpass $53.51 Billion by 2031
04/25/2024 | PRNewswireSkyQuest projects that the nanotechnology market will attain a value of USD 53.51 billion by 2031, with a CAGR of 36.4% over the forecast period (2024-2031).
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
SMC Korea 2024 to Highlight Semiconductor Materials Trends and Innovations on Industry’s Path to $1 Trillion
04/24/2024 | SEMIWith Korea a major consumer of semiconductor materials and advanced materials a key driver of innovation on the industry’s path to $1 trillion, industry leaders and experts will gather at SMC (Strategic Materials Conference) Korea 2024 on May 29 at the Suwon Convention Center in Gyeonggi-do, South Korea to provide insights into the latest materials developments and trends. Registration is open.