U.S. Circuit Goes Green with Solar and LED Installation


Reading time ( words)

U.S. Circuit has just completed a $1 million installation of a 251 kWh solar system covering their entire parking lot.

This system makes U.S. Circuit one of a kind within the U.S. PCB fabrication industry. With this massive green effort, U.S. Circuit looks to save the company about 20% on their electric bill, with the side benefit of providing shaded covered parking for their employees. 

To further their green effort, U.S. Circuit has also converted all of their internal and external lighting systems to 480 LED fixtures.

U.S. Circuit President Mike Fariba stated, “With all the impact to the environment and our fuel sources these days, we felt the need to do our part to reduce our own footprint. Going green has taken time and presented some challenges up front but we’re confident that our efforts will provide great benefit for both the environment and U.S. Circuit for years to come.”

About U.S. Circuit

For 30 years, U.S. Circuit has been a premier supplier of commercial PCBs and for the past several years a supplier for the military and aerospace market. U.S. Circuit has experienced continued growth in a challenging economy through consistently high performance, on-time delivery, superior quality and an emphasis on the highest level of customer service. U.S. Circuit is proud to be the circuit board manufacturer for more than 250 growing companies.

Share

Print


Suggested Items

RBP Discusses New Management and Plans for the Future

11/23/2021 | Nolan Johnson, I-Connect007
Ernie Litynski, president of RBP Chemical Technology and Dan Carey, incoming executive vice president, brief Nolan Johnson on the recent organizational changes that brought Carey on board. Both Litynski and Carey outline how they see these changes benefiting their customers and partners, including in the defense and aerospace sectors. As they explain, it's their expertise at helping solve problems that customers value most.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

03/26/2021 | Andy Shaughnessy, Design007 Magazine
This week, we have a round-up of stories from around the industry, including a Real Time with… IPC APEX EXPO interview with Ventec, an article by Tamara Jovanovic about eliminating “garbage in, garbage out,” a review of an EIPC webinar by Pete Starkey, and news about another trade show going virtual this summer. And last but certainly not least, we bring you our one-minute video salute to all the fantastic people in this industry who we’ve worked with for decades. Enjoy!

Bonding Hybrid Multilayer Constructions at Rogers Corporation

03/10/2021 | Real Time with...IPC
John Ekis, Rogers Corporation's market segment director for aerospace and defense, discusses the SpeedWave family of low-dielectric constant, ultra-low-loss prepreg materials with excellent filling and bonding characteristics for hybrid multilayer constructions. SpeedWave prepreg is also compatible with FR-4 fabrication processes and lead-free PCB assembly processing. SpeedWave is available in multiple spread and open weave glass style and resin content combinations, and is also compatible with FR-4 fabrication processes and lead-free PCB assembly processing.



Copyright © 2021 I-Connect007. All rights reserved.