Digicom Electronics Incorporates Nitrogen in Soldering and Reflow Processes to Maximize Device Reliability
October 5, 2016 | Digicom Electronics, Inc.Estimated reading time: 1 minute
Digicom Electronics Inc., a technology and quality-driven electronics manufacturing services company, now generates its own nitrogen to use in its solder reflow, selective soldering, and hand soldering manufacturing processes to strengthen the bonds and improve solder adhesion. Adding nitrogen minimizes device failure and ensures printed circuit board integrity, especially for mission critical products for the medical, military and aerospace, industrial, and RF wireless industries. The addition of nitrogen is part of Digicom's Diamond Track Manufacturing Processes.
"Manufacturers must seek every way possible to eliminate failures of the devices they manufacture," said Mo Ohady, general manager, Digicom Electronics. "Many major failures result from a weakness in the solder joint that connects the wire bond to the PCB or the solder connecting the device or package to the board. Processes that seem to benefit the most are the ones that have a narrower pitch, so the narrower the pitch, the more that nitrogen use is recommended. Studies show a 50-60% reduction in defect level when using nitrogen in the reflow process. Digicom seeks to employ technologies that produce products of the highest quality. Towards that end, we have implemented nitrogen in our manufacturing process."
The nitrogen is generated and piped directly to machine inputs and work areas at a prescribed volume and pressure to achieve optimized saturation of the inert gas and to eliminate oxidation at critical moments of the soldering operation.
Digicom is certified for ISO 9001:2008, ISO 13485:2003 medical devices quality, quality system regulation 21 CFR 820, and ITAR certification. For more information or to arrange a visit at Digicom's newly expanded facility at 7799 Pardee Lane, Oakland, CA 94621, contact Digicom Electronics at +1-510-639-7003, email info@digicom.org, or see our videos, articles, and information at www.digicom.org.
About Digicom Electronics
Digicom Electronics offers advanced electronics manufacturing with "Made in the USA" quality that fits the needs of larger enterprises while at the same time providing the benefits and individual attention needed to serve start-up companies. Digicom collaborates in all aspects of the process from the design to the final, fully compliant product. Material procurement and management services include planning, purchasing, expediting and warehousing of components and materials. Digicom has ISO 9001:2008, ISO 13485:2003 medical devices quality, quality system regulation 21 CFR 820, mil-spec 45208, ITAR, and numerous other certifications.
Suggested Items
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
Empowering Electronics Assembly: Introducing ALPHA Innolot MXE Alloy
04/16/2024 | MacDermid Alpha Electronics SolutionsIn the rapidly evolving electronics industry, where innovation drives progress, MacDermid Alpha Electronics Solutions is committed to setting a new standard. Today, we are pleased to introduce ALPHA Innolot MXE, a revolutionary alloy meticulously engineered to address the critical needs of enhanced reliability and performance in modern electronic assemblies.
New Book on Low-temperature Soldering Now Available
04/17/2024 | I-Connect007I-Connect007 is pleased to announce that The Printed Circuit Assembler’s Guide to… Low-temperature Soldering, Vol. 2, by subject matter experts at MacDermid Alpha Electronics Solutions, is now available for download.
Inkjet Solder Mask ‘Has Arrived’
04/10/2024 | Pete Starkey, I-Connect007I was delighted to be invited to attend an interactive webinar entitled “Solder Mask Coating Made Easy with Additive Manufacturing,” hosted by SUSS MicroTec Netherlands in Eindhoven. The webinar was introduced and moderated by André Bodegom, managing director at Adeon Technologies, and the speakers were Mariana Van Dam, senior product manager PCB imaging solutions at AGFA in Belgium; Ashley Steers, sales manager at Electra Polymers in the UK; and Dr. Luca Gautero, product manager at SUSS MicroTec Netherlands.