Robotic Drones to 'Print' Emergency Shelters for Those in Need
February 18, 2016 | Bath UniversityEstimated reading time: 2 minutes
A new research project aims to develop the world's first flying robots capable of autonomously assessing and manufacturing building structures to help areas suffering from natural disasters.
The four year collaborative research project entitled ‘Aerial Additive Building Manufacturing: Distributed Unmanned Aerial Systems for in-situ manufacturing of the built environment’ involves researchers from the University of Bath, Imperial College and University College London.
Providing disaster relief
The research team aims to develop drones that can use an Additive Building Manufacturing (ABM) system to reach remote and disaster areas, and 3D print structures such as shelters and buildings, providing much needed disaster relief.
The drones being developed could fly to a disaster zone, scan and model the landscape using Building Information Management (BIM) systems, design temporary shelters, and print them on the spot. This could give those in need a place to live until emergency services personnel can reach them.
Revolutionising remote construction
ABM is a key technological building revolution currently transforming the construction industry by allowing the 3D printing of buildings and building components, resulting in quicker build times and reduced material and transport costs.
However, due to their large size, ABM systems are inflexible making it difficult for them to undertake maintenance and repair work, especially in remote and rural areas.
World's first mobile factories
Whilst many drones are used for photography and surveillance, the drones in this project will utilise a revolutionary ABM system to remotely manufacture building structures such as shelters and bridges for those in need.
In order to use this type of system for post-disaster reconstruction activities where the manufacturing speed of ABM would be hugely beneficial, the research team aims to develop the world's first ABM system consisting of a swarm of aerial robots that can autonomously assess and manufacture building structures.
To do this, the team plans to miniaturise ABM and give it aerial capabilities so that it can be more mobile and able to manufacture complex high-rise structures. This would enable the robots to act as flying mini-factories, where they would land at to a construction site and work together to create buildings from scratch.
Co-investigator and Senior Lecturer in our Department of Architecture & Civil Engineering, Dr Richard Ball said: “We are delighted to be part of this ambitious and exciting project which will push the forefront of construction technologies into the future.”
Co-investigator and Senior Lecturer in our Department of Architecture & Civil Engineering, Dr Chris Williams added: “It is exciting to be working on a project where the structure has to be so light and efficient that it can be built by small flying drones.”
The University’s Department of Architecture & Civil Engineering was ranked equal first in the UK in Architecture & the Built Environment for the high quality and international impact of its research (2014 Research Excellence Framework). In the assessment, 85 per cent of its research output was judged to be internationally excellent while 90 per cent of its research impact was judged outstanding.
Suggested Items
U.S. Companies Invest Heavily in Robots
04/30/2024 | IFRManufacturing companies in the United States have invested heavily in more automation: total installations of industrial robots rose by 12% and reached 44,303 units in 2023. Number one adopter is the car industry followed by the electrical and electronics sector.
Flex Receives Ericsson 2023 Supplier Sustainability Award
04/30/2024 | FlexEricsson recently awarded Flex with its 2023 Supplier Sustainability Award — the second time since 2021. The award recognizes the extended supply chain benefits from sustainable manufacturing operations in the Flex facility in Tczew, Poland, that runs on 100 percent renewable energy.
USPAE to Springboard U.S. Technology Forward
04/30/2024 | Marcy LaRont, PCB007 MagazineThe U.S. Partnership for Assured Electronics (USPAE) was launched as a nonprofit subsidiary of IPC in 2020, specifically to manage the DoD relationship and access to funding, and to develop a cooperative facility to develop UHDI capabilities in the U.S., not only for the defense sector, but for the whole of the U.S. electronics industry. It is a tall order, but industry veteran Joe O'Neil believes it will happen. Having been tasked with making the UHDI Capable Cooperative Production Facility (UCCPF) a reality, he provides an update on this important project for U.S. electronics manufacturing.
Real Time with… IPC APEX EXPO 2024: Insight into Summit Interconnect's Success
04/30/2024 | Real Time with...IPC APEX EXPOShane Whiteside, CEO of Summit Interconnect, discusses the company's recent recognition as one of the best PCB fabricators in the industry by receiving IPC's Peter Sarmanian award. Whiteside touches on the impact of changes in the marketplace, such as the Defense Production Act and presidential determination, on their growth. Whiteside also shares the company's focus on mechanical and data automation to enhance manufacturing processes and anticipates more automation and evolution in the industry.
Latest Test and Inspection Solutions from GOEPEL electronic at SMTconnect 2024
04/29/2024 | GOEPEL electronicGOEPEL electronic will be demonstrating automated test and inspection equipment at SMTconnect, taking place in Nuremberg from June 11 to 13, 2024.