Northrop Grumman Achieves Key Milestone in Arctic Satellite Broadband Mission
August 8, 2023 | Northrop GrummanEstimated reading time: 1 minute
Northrop Grumman Corporation has delivered two major components of the Arctic Satellite Broadband Mission (ASBM) and has started the next phase of pre-launch preparations. This two-satellite constellation will deliver protected satellite communications to the Northern polar region – one of the most difficult locations on earth to deliver communications.
The most recent accomplishments include:
- Successful delivery of the Control and Planning Segment (CAPS) ground system to the U.S. Space Force
- On-time delivery of both Enhanced Polar System Recapitalization (EPS-R) payloads to the Space Force
- Integration of the EPS-R payload on ASBM-1 and ASBM-2
- Successful completion of thermal-vacuum environmental testing on ASBM-1
ASBM is a combined effort between the U.S. Space Force, Space Norway and Northrop Grumman. ASBM uses the Northrop Grumman GEOStar-3 platform, which includes the main satellite structure and systems required to maintain operation, such as power, propulsion, communications, command and data handling, thermal control and guidance and navigational control. Northrop Grumman also provides the payload and ground system for this critical capability.
“Northrop Grumman’s end-to-end space technology capabilities represent a powerful model for government and commercial partnerships in space, marked by greater agility and affordability,” said Tom Wilson, corporate vice president and president, Northrop Grumman Space Systems. “Our work to deliver protected polar satellite communications will fill a critical need for our customers.”
The CAPS ground system was delivered to the Space Force in March following successful completion of the site acceptance test, functional configuration audit/physical configuration audit and DD-250 sell-off. CAPS is currently transitioning to the operations phase which opens the door for using the ground system for early operations with the two on-orbit operational EPS payloads along with the capability to support the two EPS-R payloads after the ASBM launch.
The satellites also carry multiple hosted payloads, including an X-Band payload for the Norwegian Ministry of Defense, a Ka-Band payload for Inmarsat and the Norwegian Radiation Monitor payload commissioned by the European Commission.
Suggested Items
Lockheed Martin Australia, The Department Of Defence Sign Strategic Partnership Head Contract
04/26/2024 | Lockheed MartinLockheed Martin Australia signed a landmark AUD$500 million contract with the Department of Defence to build Australia’s future Joint Air Battle Management System under project - AIR6500 Phase 1 (AIR6500-1).
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.