NASA Tests Autopilot Sensors During Simulations
August 8, 2017 | NASAEstimated reading time: 3 minutes
Inside a large, black-walled facility outside Denver, NASA’s Satellite Servicing Projects Division (SSPD) team successfully completed the latest testing of three rendezvous and proximity operations sensors used for satellite servicing applicatons and beyond. These sensors are needed for autonomous rendezvous of spacecraft, which is a vital technology for robotically servicing a satellite.
Held at Lockheed Martin’s Space Operations Simulation Center (SOSC), this round of testing involved a Vision Navigation System (VNS) light detection and ranging (Lidar) sensor, the Goddard Reconfigurable Solid-state Scanning Lidar (GRSSLi) sensor, and the wide field-of-view visible camera. These three instruments were tested side-by-side in different situations to assess their accuracy and sensitivity for eventual use in satellite servicing. The sensors all contribute to helping a servicer “see” and approach a client.
“These sensors are the key to tackling the most difficult part of satellite servicing, the autonomous rendezvous. Our team was very pleased with the performance of these imagers in a space-like environment,” said Bob Smith, satellite servicing project manager.
To autonomously rendezvous, two spacecraft must connect without any human control or input. A combination of sensors, algorithms and a computer are essential to generate the precise maneuvers needed for this challenging operation.
During testing at SOSC, engineers simulated multiple scenarios. To start, the three-instrument suite was set to a fixed position and viewed calibrated targets at known distances to calibrate their instrument’s light and distance sensitivity. Next, engineers used a model of a satellite affixed to a moving robot, and instruments mounted on another robot to “fly” toward the satellite to record data during this simulated, controlled rendezvous. In addition to gathering light and distance measurements using VNS and GRSSLi, this test also allowed operators to test algorithms that determine the position and orientation or “pose” of a satellite while conducting a simulated rendezvous.
SSPD aims to demonstrate and mature technologies that are critical to satellite servicing, including the instruments derived from these tested sensors. The instruments will feed vital data to a cutting-edge SpaceCube computer, which will process the data for autonomous tracking, approach and grasping of a client accordingly.
The testing conducted at the SOSC confirmed improved performance for light intensity and range measurements by the imagers. The results also indicate that the VNS is progressing on schedule per the SSPD timeline.
In addition to satellite servicing testing, there were also two teams from NASA’s Johnson Space Center in Houston that tested the VNS for applications specific to human exploration missions. One team gathered data for possible applications of autonomous rendezvous for visiting vehicles to the International Space Station. The second group collected data that could be incorporated into the design of Orion, NASA’s new exploration spacecraft, designed to carry astronauts to destinations in deep space, including Mars. Both groups conducted long range testing and simulated rendezvous to a docking port mockup.
In a technology demonstration related to this SOSC testing, SSPD is also currently executing the Raven mission on the International Space Station, which is helping NASA develop autopilot for spacecraft. While testing at SOSC helps engineers develop algorithms and verify sensor performance using calibrated distances between two objects, testing on the space station provides data on in-orbit functionality of sensors compared to ground testing, and is the best environment to test an infrared camera. Utilizing both ground-testing and flight-testing is part of the process of learning, perfecting, and solving difficult engineering challenges for space exploration.
The three instruments are now back from SOSC and at NASA’s Goddard Space Flight Center in Greenbelt, Maryland, where the SSPD team is reviewing data to streamline and maximize their performance.
“The data from this testing will help us build flight cameras and Lidar systems for making satellite servicing a reality,” said Benjamin Reed, SSPD deputy division director.
Suggested Items
Koh Young Showcases Award-winning Inspection Solutions at SMTconnect with SmartRep in Hall 4A.225
04/25/2024 | Koh Young TechnologyKoh Young Technology, the industry leader in True 3D measurement-based inspection solutions, will showcase an array of award-winning inspection and measurement solutions at SMTconnect alongside its sales partner, SmartRep, in booth 4A.225 at NürnbergMesse from June 11-13, 2023. The following offers a glimpse into what Koh Young will present at the tradeshow:
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Real Time with... IPC APEX EXPO 2024: Industrial Quality Solutions from Zeiss
04/23/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson and Herminso Gomez of Zeiss Group discuss the company's industrial quality solutions, with a focus on X-ray technology. Zeiss provides a range of microscopy options and Herminso highlights the advantages of X-ray technology for aerospace, medical, and consumer electronics sectors.
Altair Acquires Cambridge Semantics, Powering Next-Generation Enterprise Data Fabrics and Generative AI
04/22/2024 | AltairAltair a global leader in computational intelligence, acquired Cambridge Semantics, a modern data fabric provider and creator of one of the industry’s leading analytical graph databases.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/19/2024 | Marcy LaRont, PCB007 MagazineFor my must-read picks of the week, I’m highlighting Parker Capers, a young professional seeking employment, solid counsel from Dan Beaulieu on what your post-show plan should look like, more information and insight on “chiplets” and the need for secure data transfer standards from columnist Preeya Kuray, as well as Matt Stevenson’s design for reality wisdom. It’s a reminder to download one of our newest books (there are several) you don't want to miss if you are an assembler.