PCB Design is All in the Family with Nicole Pacino
I shared a flight with Nicole Pacino on the way to Altium Live in Munich, and she mentioned that her father was speaking at the show. I went down the list of speakers, and it turned out that her dad is Mike Creeden of San Diego PCB. In Germany, I asked Nicole to tell us about how she got into this industry, and what we could do to draw more young people into this career.
Top 10 Most-Read SMT007 Articles for March
Starting this month, we will take a look back at the most popular SMT007 news, articles, interviews, and columns over the past 30 days. For the month of March, these are the top 10 most-read SMT007 articles. Check them out.
Nano Dimension Offers Update on Dragonfly 3D Printer a Year After Launch
The Nano Dimension Dragonfly 3D printer arrived in much fanfare a little over a year ago. The company has been selling them to customers around the world, many of whom are using them to print antennas, sensors, and PCBs. At AltiumLive in Munich, I asked Product Manager Robert Even to discuss what they’ve learned in the year since the Dragonfly debuted, and some potential uses for 3D printing technology.
Jennie Hwang: Get Ready for Disruptive Technologies
At IPC APEX EXPO 2019, Dr. Jennie S. Hwang, a columnist, author, and all-around an expert in PCB assembly, discusses some of the changes she has seen since joining the industry, and disruptive technologies that technologists we are going to have to face in the near future. Are you ready for the future?
SMTA Europe Electronics in Harsh Environments Conference 2019: A Preview
As a prelude to this year's Electronics in Harsh Environments conference, which will be held on April 2–4, 2019 in Amsterdam, Netherlands, SMTA Europe chairman Keith Bryant, supported by technical specialist Bob Willis, showcased the challenges and key issues faced by design and process engineers worldwide, in a webinar entitled "Harsh Environment Failures—Causes & Cures."
IPC Validation Services: New Programs and Updates
At the recent IPC APEX EXPO 2019 show, Randy Cherry, director of IPC Validation Services, gives Judy Warner an overview of a new IPC-1791 QML program focused on prime contractors and OEMs, and provides updates on existing programs.
NCAB Group on Supply Chain Issues
In an interview with I-Connect007, Wayne Antal, a key account manager with NCAB Group, discusses supply chain issues, the effect he sees on PCB fabrication channels, and how his customers are adapting to the new business dynamics.
Gene Weiner on the IPC APEX EXPO 2019 Automotive Executive Forum
Dan Feinberg spoke with Gene Weiner, president and CEO of Weiner International Associates, about IPC's history of forums, his thoughts on the Executive Forum on Advancing Automotive Electronics at IPC APEX EXPO 2019, and how the IPC Hall of Famers and the industry can help improve forum success.
Inspiring the Next Generation of Industry Leaders: IPC STEM Student Outreach Program
At IPC APEX EXPO 2019, I-Connect007 Managing Editor Patty Goldman spoke with Colette Buscemi, IPC's senior director for education programs, about the success and expansion of the IPC STEM Student Outreach Program, activities and scholarship opportunities for students through sponsor support—including I-Connect007—and feedback she received on the event.
NCAB Group on Supply Chain Issues
Wayne Antal, a key account manager with NCAB Group, discusses supply chain issues, the effect he sees on PCB fabrication channels, and how his customers are adapting to the new business dynamics. This is part one of a two-part conversation with Antal.
RTW IPC APEX EXPO 2019: Lenthor Discusses Facility Expansion and New Equipment
Rich Clemente, general manager of Lenthor Engineering, discusses with Dan Feinberg, I-Connect007 Guest Editor, the company’s expansion and new facility and equipment. He also talks about his outlook for the electronics manufacturing industry in North America.
Can E-waste and Metals Recovery Efforts Lower Environmental Risks and Liability?
Gold, palladium, silver, and other precious metals (PMs) in manufacturing wastes represent high value, but how PMs are recovered can pose environmental and liability issues. Aerospace and electronics manufacturers and suppliers, in particular, produce volumes of manufacturing wastes that contain varying levels of PMs.
Award-winning Koh Young Process Optimizer
Joel Scutchfield, sales director with Koh Young America, discusses the company's outlook and new product offerings for 2019, including their Koh Young Process Optimizer (KPO), which won an award at IPC APEX EXPO 2019 for the process control software category.
Super Dry Storage Options to Manage Intermetallic Growth
Guest Editor Kelly Dack speaks with Richard Heimsch, director of Super Dry, about some of the differences between storing components and other materials for assembly floor storage versus long-term storage, and how Super Dry can help combat intermetallic growth.
RTW IPC APEX EXPO: Zentech on the Fourth Pillar of DoD Acquisitions, and NIST
Steve Williams speaks with John Vaughan, VP of sales and marketing for Zentech, about their dominance in the military/aerospace market sector, the new "fourth pillar of DoD acquisitions," and how companies that do not take the NIST initiative seriously will be quickly left behind.
RTW IPC APEX EXPO 2019: Taiyo Discusses New Solder Masks and Photoimageables
Donald Monn, Midwest regional sales manager for Taiyo America, turns the tables on I-Connect007 Technical Editor Pete Starkey and quizzes him about his knowledge of Taiyo's new crack-resistant white solder mask for automotive, and the company's standard photoimageables re-formulated for laser direct imaging (LDI) that avoid the need for UL requalification.
RTW IPC APEX EXPO 2019: Ventec's Goodwin on Global Technology Directions
Mark Goodwin, Ventec International Group CEO EMEA and USA, comments on technology directions globally and in the North American market. He also explains how Ventec's quality accreditations, technical expertise, and flexible manufacturing capacity continue to strengthen their leading position.
CES 2019: More Show Floor Favorites
In my final piece covering CES 2019, I will review more automotive technology, updates on 3D printing, and some trending devices such as smartwatches and new computer components for those that either need or just want to have extremely powerful and impressive-looking computers.
RTW IPC APEX EXPO 2019: Ventec Highlights Core Solutions for Thermal Management
Jack Pattie, president of Ventec International Group, speaks with I-Connect007 Guest Editor Kelly Dack about the many heat issues associated with circuit boards right now—whether in general applications, power applications, PCs—as everyone demands smaller, faster, and more powerful systems.
Happy Anniversary, Gerber Format: Looking Ahead to Digital Innovation
This year, we celebrate the 55th anniversary of the introduction of the Gerber machine language format. We can thank H. Joseph Gerber, the man who took manual PCB design to the next level with the automated photoplotter, for giving us this format in 1964. Gerber immigrated to the United States in 1940 with his mother following the death of his father during the Holocaust. Gerber started Gerber Scientific Instrument Company in 1948 to commercialize his first patented invention—the variable scale.
ESI’s Chris Ryder: There’s More to Choosing a Laser Than You Think
At the recent HKPCA show, I sat down with ESI’s Chris Ryder, director of product management—HDI—to discuss considerations for choosing a new laser system, and how ESI uses its decades of flex and rigid-flex drilling experience to help guide customers in their decision-making process.
Dock Brown on Succeeding at Failure Analysis
Dock Brown of DfR Solutions gave a keynote speech at SMTAI, “Requirements for Both Cleaning and Coating to Building Medical Hardware.” Barry Matties and Happy Holden sat down with Dock to discuss the current trends he sees in failure analysis, the concept of “rules versus tools,” and how predictive engineering software used early in the design cycle can help predict failures in components and microvias and drive cost down.
Randy Burcham Discusses New Techniques for BOM, Daughterboards
During AltiumLive, I spoke with IOTA Engineering's Randy Burcham, who taught several classes during the event. He explained his methodology for filtering BOM data as well as his new approach to working with daughterboards and how he was up and running on Altium tools after only three days.
Defense Speak Interpreted: PERM—Pb-free Electronics Risk Management
In this column, we explore PERM—the Pb-free Electronics Risk Management Consortium. No, the group members do not all have curly hair! The name was chosen around 2008 by a group of engineers from aerospace, defense, and harsh environment (ADHE) organizations.
Martyn Gaudion on Signal Integrity Modelling and Stackup Tools
The accuracy of signal integrity modelling continues to improve, and stackup tools are becoming widely used, which now include material suppliers' datasheet information. During the recent electronica show in Munich, Germany, Martyn Gaudion, managing director at Polar Instruments, explained how Polar often serves as a bridge between PCB design and fabrication, and why educating his customers is so critical.
Space Communications and Navigation: Supporting Exploration
NASA spacecraft have studied Earth and the surrounding universe for more than 60 years, making ground-breaking discoveries and enabling human exploration. From hundreds, thousands and millions of miles away, these spacecraft must send their critical information back to Earth and the scientists who can use it.
Ventec's Marketing Strategy and Their Newly Appointed Technology Ambassador
At electronica 2018, Mark Goodwin, chief operating officer at Ventec International Group, discusses the company’s marketing strategy along with their newly appointed technology ambassador, Alun Morgan, and how he sees the world.
Tempo Automation's Open House Raises the Curtain in San Francisco
Based in San Francisco, Tempo Automation specializes in rapid PCB assembly and on low volume production for a wide range of board complexities. It recently held an open house at its brand-new facility in the South of Market (SoMa) district—which is normally restricted under customer non-disclosure agreements as well as International Traffic in Arms Regulations (ITAR) regulations—to customers, vendors, local designers, and government officials.
150+ Years of Experience: Reflections with Three Industry Icons
You would be hard-pressed to find a more knowledgeable and experienced group than that of Gary Ferrari, Gene Weiner, and Happy Holden. In a brief interview with Barry Matties, these three industry icons consider the past, present, and future state of electronics manufacturing while also offering advice to the newest generation of manufacturers.
DARPA Unveils 2019 AI Colloquium
Throughout DARPA’s history, artificial intelligence (AI) has been an important area of groundbreaking research and development (R&D). In the 1960s, DARPA researchers completed some of the foundational work in the field, leading to the creation of expert systems, or the first wave of AI technologies.
Christine Pearsall on Tempo Automation and PCB West
Christine Pearsall, senior director of marketing for Tempo Automation, discusses with Consulting Technical Editor Tim Haag what services Tempo Automation provides, what attracts engineers and designers most to the company, and what events they plan to attend in the upcoming year.
Pros and Cons of Dual Sourcing
Now, more than ever, there's a need for responsive and flexible supply chains. For OEMs, one solution to mitigate the risk of supply chain disruption is to maintain relationships with more than one supplier through dual sourcing—the practice of purchasing a chosen raw material, product, or service from two (or sometimes multiple) sources. Here are it's pros and cons.
Rick Hartley is Bullish on PCB Design, 3D Printing
At the recent PCB West in Silicon Valley, Consulting Technical Editor Tim Haag met with long-time design industry veteran Rick Hartley to discuss the changing landscape of circuit board design, the layout designers of the future, and how designers can benefit from 3D printing of circuit boards.
Additive Electronics: PCB Scale to IC Scale
SAP, mSAP, SLP—what kind of crazy acronyms have we adopted now, and how much do you really need to know? In terms of consumer electronics, there is a good chance that the smartphone attached to your hand at all times contains a PCB fabricated with this technology—or at the very least, the next-generation smartphone that you purchase will utilize mSAP technology.
RTW SMTAI: MacDermid's Lenora Clark Talks Automotive Electronics Trends
Lenora Clark, director for end-user applications at MacDermid, discusses some of the trends happening in the automotive electronics industry. She talks about how her company is educating their customers in the automotive electronics sector on the available technologies in other markets such as military and aerospace, telecommunications—even the handheld market—and how they can adopt these technologies in their industry.
The Changing Shape of the HDI Market
With more mobile device designers looking to utilize the benefits of FOWLP and other direct attach package types, a new generation of HDI PCBs is already in the market. Targeting less than 30 mm features and based on mSAP techniques, these substrate-like PCBs make use of the latest high-end manufacturing processes and materials, to enable the next evolution in advanced HDI boards.
Cadence: Bullish on AI
David White has been involved with artificial intelligence research for almost 30 years. Now, David is the senior group director of R&D for Cadence Design Systems, and I knew we’d have to speak with him for this issue on AI. In a recent interview, we discussed his decades of work in AI, Cadence’s research into AI and machine learning, and what he believes AI could mean for the EDA tools of the future.
GP Ventures’ Tom Kastner on PCB Mergers and Acquisitions
Tom Kastner, president of GP Ventures, he has his finger on the pulse of the industry's mergers and acquisitions (M&A) more than anyone. In this interview, Kastner provides insights on the right time to buy, how to evaluate your company's worth, and when it is too late.
SLP: The Next Level of Technology
As our electronic devices and machines become more powerful and as Moore’s Law chugs along, things in the world of PCBs keep getting smaller. You know the drill—finer lines and spaces, thinner laminates, more layers— cram more circuitry into the same or shrinking area. Where will it all end? Or will it?
XR Update: Emerging Realities
The rate of advance in the use of XR—the term now being used to cover AR (augmented reality), VR (virtual reality), and MR (mixed reality)—in many areas, along with advances in the hardware and network capability supporting the use of XR, is accelerating. And because things are moving so quickly, here's a quick review and an update on recent developments in this field.
Artificial Intelligence: More Questions than Answers
I’ve been covering artificial intelligence (AI) and related technologies for years, particularly at events such as the annual Consumer Electronics Show (CES). As I write this, we are in the run-up to CES 2019, and the Artificial Intelligence Conference in San Francisco, so the AI landscape is likely to change—at an ever-accelerating rate. Let’s look at some of the challenges facing AI now, and then after CES 2019 we can take another look.
Ventec Keeps 'Shaking Things Up' with tec-speed 20.0
At the EIPC summer conference, I-Connect007 Publisher Barry Matties caught up with Ventec Europe & Americas COO Mark Goodwin, who provided an update on Ventec’s new products, the current state of the company, and how Ventec is shaking things up in the materials marketplace.
Reliability Takes on a New Urgency
Consumers wanted a reliable car that wouldn’t break down on the road; a computer that wouldn’t crash; a phone network that wouldn’t drop our calls; the plane we were hurtling across the sky in to stay in the air and land safely, with the wheels down. In retrospect, those seem rather simple wants, and the industry certainly wants to deliver.
Atotech on Challenges and Opportunities in PCB Manufacturing
Abel Ruivo, Atotech Deputy Business Director of Electronics for Greater China, and Daniel Schmidt, head of Global Marketing for Electronics at Atotech Group, spoke with I-Connect007 about the various challenges of PCB manufacturing in China, as well as about the opportunities in the sector.
PCB Design, Fabrication and Use from the Mil-Aero End-User Perspective
The procedures described for Rolls Royce were directly comparable with those described for MBDA, and the presenters were unanimous in re-emphasising the importance of working closely with their chosen PCB fabricators at all levels and all stages of design, qualification and production of their circuit boards.
Best Practices to Achieve Zero Defects
To ensure that a complex electronics build can be completed on time, on budget and with zero defects, here is a list of checks and balances that will help you with adjustments or corrections real time, instead of discovering them at the end of the build or worse, when it's already arrived at the end user.
IMPACT Washington D.C., 2018 with Juki Automation’s Bill Astle
I-Connect007's Patty Goldman caught up with Juki Automation’s Bill Astle during a luncheon on the last day of IMPACT Washington D.C., 2018. As a first-time attendee, Bill came away feeling like he made the right connections with key members of Congress, and he looks forward to returning to the event in the future.
EIPC 50th Anniversary Conference Day 1: The Past, the Present and the Future, Pt. 1
Just like old times—meeting with John Ling, with whom I had previously travelled to industry events for over two decades, and who still carries the role of EIPC marketing manager, to fly together from Birmingham UK to Dusseldorf in Germany for the EIPC 50th Anniversary Summer Conference.
Excerpt: The Printed Circuit Designer’s Guide to…Flex and Rigid-Flex Fundamentals
The design process is arguably the most important part of the flex circuit procurement process. The decisions made in the design process will have a lasting impact, for better or worse, throughout the manufacturing cycle. In advance of providing important details about the actual construction of the flex circuit, it is of value to provide some sort of understanding of the expected use environment for the finished product.
5G—Generation after Generation
If you’re like me, you’ve probably heard of 5G, but you may not understand what all the fuss is about. First, 5G simply means fifth-generation mobile networks. The best way to understand what 5G is about is to understand all the other Gs, like 3G and 4G (we rarely hear about the early Gs!).
Catching up with Fineline-Global N. American CEO Eran Navick
After entering the North American marketplace just six months ago, printed circuit board provider Fineline-Global is making its mark. As the largest value-added PCB supplier in the world, Fineline prides itself on being any able to meet any challenge for any company in any part of the world. I recently had the chance to sit down with Eran Navick, the company’s North American CEO to catch up on how things are going.
APCT Moves into Rigid-Flex with Cartel, Cirtech Acquisition
When I spoke with APCT President Steve Robinson a year ago, he said he was interested in adding flex and rigid-flex capabilities, and working closely with designers and engineers. With the recent acquisition of Cartel and their subsidiary Cirtech, APCT now has a flex and rigidflex facility, along with military and aerospace certifications. At DesignCon 2018, I asked Steve to discuss these acquisitions and what they mean for APCT and their customers.
Why Cleaning Still Matters
Paco Solis, lead investigator at Foresite Inc., speaks with I-Connect007 about why cleaning is more important now, the common pitfalls and misconceptions in cleaning, and strategies to consider to ensure reliable PCB assemblies.
Golden Anniversary for EIPC at the 2018 Summer Conference
June marks the start of summer, and with that, the EIPC’s annual summer conference. Highlighted by its thought-provoking presentations, social outings and factory tours, the conference continues to be valuable and productive for attendees. This year should prove no different, with EIPC set to celebrate its 50th anniversary. I spoke with EIPC Executive Director Kirsten Smit-Westenberg about what can be expected from the upcoming conference in Düsseldorf, Germany.
AWE: Introducing the Augmented World Expo
The largest and most diverse event regarding the depth and breadth of technological progress and advancement is CES, which lets us get updates and allows us to focus on anything from drones to 3D additive PCB fabrication, from autonomous transportation and the degree of electronics in the newer and upcoming vehicles to the quantum computers and AI of the near future, from the forecasts found in science fiction of the ‘60s and ‘70s to the reality of 21st century technology.
Experts Discussion with John Talbot, Tramonto Circuits
For this first issue of Flex007 Magazine, we interviewed John Talbot, president and owner of Tramonto Circuits. Headquartered in metro Minneapolis, Minnesota, Tramonto manufactures flexible and rigid PCBs for a variety of industry segments. Editors Andy Shaughnessy, Patty Goldman and Stephen Las Marias asked John to discuss the challenges and opportunities in the world of flexible circuits, and some of the trends he’s seeing in this market.
Experts Discussion: The Flex Technologists Speak
For our first issue of the Flex007 Magazine, we invited a group of flexible circuit experts to discuss their work in this rapidly growing segment. Participants included Jonathan Weldon of DuPont, Mark Finstad of Flexible Circuit Technologies, and Scott McCurdy and Scott Miller of Freedom CAD. In a free-wheeling discussion with Andy Shaughnessy and Barry Matties, these technologists share their thoughts on the challenges and opportunities in flexible circuits, as well as what constitutes the cutting edge of flex right now.
ACE’s AccuWrap Simplifies Multiple Sequential Laminations with Blind Vias
At DesignCon 2018, I spoke with James Hofer, general manager for Accurate Circuit Engineering, a quick-turn fabricator based in Santa Ana, California. James gave me a preview of AccuWrap, a new type of processing technology that lets designers reduce the amount of copper during sequential laminations while still meeting IPC specs, which should be of great interest to RF designers.
The Survey Said: Industry Optimistic After Strong 2017
During recent trade shows and conferences, we spoke with a variety of fabricators and assembly providers. They had one thing in common: Every company achieved strong growth in 2017, and shared a positive outlook about the future. This year, the industry is optimistic, driven by positive economic outlook, growing customer demand, and new technologies and vertical markets, among others.
Succeeding at the Velocity of Technology: An IPC APEX EXPO 2018 Wrap-Up
After many months of planning, IPC APEX EXPO 2018 proved to be a success. From revolutionary advancements displayed on the show floor to expert insights conveyed in technical conference sessions and professional development courses, IPC APEX EXPO provided the learning and connections that helped 4,574 attendees from 43 countries prepare for the future.