TTM Shines a Light on Optical Interconnect
Are embedded optics on PCBs set to make a breakthrough in the upcoming years? According to Dr. Craig Davidson, VP of Corporate Technology at TTM, it might be closer than you’d expect. In a recent interview with the I-Connect007 team, Craig outlines TTM’s current pursuit of high-volume manufacturing lines able to deliver embedded optical interconnect, what that would mean for the PCB industry, and why he thinks there will be manufacturing production capability by 2020.
Fabricators Speak Out on High-Speed Materials
Recently, I-Connect007 Publisher Barry Matties and his editorial team joined with two PCB fabricators to discuss the state of advanced materials. The meeting included Gerry Partida, director of engineering at Summit Interconnect and Joe Menning, program manager at All Flex Flexible Circuits. The discussion centered on the processes, challenges, and procurement of high-speed materials, as well as need to work with customers during the design stage.
Capitol Connection: IMPACT Update—To CEOs on Why You Should Attend IMPACT Washington, D.C. 2017
Here at IPC, we place a high priority on making our presence known in the halls of government, because so many policy debates have a direct effect on the electronics manufacturing industry. IMPACT Washington, D.C. 2017 is a chance to join with fellow industry executives in advocating for better public policies for a stronger, more advanced manufacturing economy.
Mutracx Makes Green Operations Economically Viable
During IPC APEX EXPO, I sat down for an interview with with Jeroen de Groot, CEO of Mutracx. He detailed the company’s plans to install new equipment at a facility in Romania, and he explains why having a green manufacturing operation is not enough—it must also be economically feasible.
Weiner’s World – March 2017
The CPCA show held at the China International PCB And Assembly Show was moderately busy even though the new venue was not quite ready (no escalators, the "water closets" not fully finished, the heat was only on for a few hours one day). It showcased products for PCB Manufacturing, Electronic Assembly Materials and Manufacturing Services.
Capitol Connection: Drumroll, Please…Announcing the IPC Government IMPACT Awardees
Government relations are essential to our industry as many of the policy debates taking place will have long-lasting impact on our industry. Tax and regulations reform, immigration, and environmental regulations are up for debate and it is time for our industry to take a seat at the table.
Ray Pritchard Looks Back at IPC’s Beginning and His Role in Getting it Started
I have known Ray Pritchard for a long time—as long as I’ve been involved with IPC, in fact. He directed the organization for 35 years before turning over the reins. One could say he grew up with the organization—or vice versa. Ray was always a bundle of energy and still is, still joking and warm, a great people person, and I am sure he had a little something to do with the spirit of camaraderie and cooperation that is the hallmark of the IPC we know today.
Imagineering CEO Khurrum Dhanji Discusses New AS9100 Guidebook
I have had many conversations with Imagineering President and CFO Parvin Dhanji, and CEO Khurrum Dhanji, and I always come away very impressed with their dedication to their community, associates and their customers. That’s why it was no surprise to me that they teamed with I-Connect007 to publish this long overdue guide to AS9100.
Vertical Conductive Structures–a New Dimension in High-Density Printed Circuit Interconnect
From our previous conversations, I knew that Joan Tourné was working on a novel high-density interconnection concept. Having eagerly awaited the chance to discuss the technology in detail, I was delighted when he contacted me to confirm that his IP had been secured and that he could now talk openly about VeCS, the Vertical Conductive Structure designed to provide a cost-effective alternative for complex fan-out from fine-pitch grid array components.
Time-Lapse Video: The IPC APEX EXPO 2017 Show in Under Seven Minutes!
During IPC APEX EXPO 2017, we at I-Connect007 had our time-lapse camera running from setup to closing. The camera was positioned high in our studio, where we conducted our RealTimewith…IPC APEX EXPO video interviews, aimed down the main aisle.
Real Time with...IPC: IPC Market Research Update
Sharon Starr updated everyone on the Market Research services, industry forecasting and research projects her group publishes. She also mentioned a "call to action" for a meeting tomorrow with IPC members, seeking input on needed metrics for their new Pulse of the Industry program she will be rolling out this year, which will be a "Industry Health Scorecard".
Weiner’s World—January 2017
This month’s column is a bit shorter than usual as we prepare for next month’s IPC APEX EXPO and its Executive Forum for PCB fabricators and their supply chain. This month also marks the 65th anniversary of Epec LLC in New Bedford, Massachusetts. The company, founded in 1952, is the oldest printed circuit fabricator in North America. Half of its $50 million in sales is reported to be with printed circuits.
CES 2017: Disruptive Technologies
Those of you that have read my previous columns covering CES 2017 know that at recent CES shows I have seen many drones, autonomous cars, IoT devices, robots, and many other items ranging from robots who stand in for your doctor to smart trash cans who tell you via Alexa, Google, or soon, Cortana on your own computer, that since you have thrown away two empty milk cartons in the last few days it may be time to order more milk; just say yes and consider it ordered.
CES 2017: Press Day, LaunchIt and Showstoppers
Before the show opens, CES provides two days and evenings not open to the general attendees, to enable companies, large and small, an opportunity to present their new offerings to the press. These opportunities range from small meetings with individual members of the trade press to huge events such as those presented by Samsung, Asus, Sony, Intel, Panasonic and others, with literally several hundred in attendance.
Emmy Ross Discusses the New I-Connect007 E-Book Series
One thing that is long overdue in our industry is a series of guidebooks focused on helping companies with all their needs, from qualifications like AS9100 and Mil-P-31032 to various technologies, heavy copper, rigid-flex and microvias. I-Connect007 is now providing our industry with an entire series of these guidebooks, starting with the first book, "The Printed Circuits Buyers Guide to… AS9100 Certification." Authored by Imagineering Inc., this book educates readers about the AS9100 quality standard, and explains how to earn this certification.
Catching up with...M&A Expert Tom Kastner
If you want to know what is going on in our industry when it comes to mergers and acquisitions, there is no better person to turn to than Tom Kastner. Whenever I want to verify a rumor of a company being bought or sold, Tom is the first person I call, and unless he is under an NDA, he will fill me in. In this, our latest discussion, we talked about the PCB industry’s M&A activity in 2016 and what Tom expects to see in 2017.
TTM President Thomas Edman on the Global PCB Market, Technology, and More
The TTM and Viasystems merger put the PCB industry on notice last year when it created one of the biggest powerhouses in the world. At this year’s HKPCA and IPC show, Barry Matties met with TTM Technologies President and Chief Executive Officer, Thomas Edman to get his views on the market, technology, the culture of TTM and even the Trump effect.
Ladle on Manufacturing: Making Suppliers Work for You
Every company has its own way of doing things. For some, the engineering team develops a detailed specification for the equipment they would like to purchase and this is put out to multiple suppliers for tender, along with full documentation for the commercial terms that will apply to the purchase. At the other end of the scale, a machine inquiry can be a simple phone call: “How much for a new machine?”
Tin Whisker Mitigation Methodologies: Report from SMART Group, Part 1
Since the introduction of the RoHS legislation in 2006, the threat of tin-whisker-related short circuit failure from pure tin finished components has remained a major concern within the high-reliability electronics manufacturing industry. In this article, Editor Pete Starkey reviews a recent seminar by the SMART Group to discuss tin whisker mitigation methodologies and strategies.
A Scientific Response to Mr. Laminate Tells All
We read with interest Doug Sober’s recent Mr. Laminate Tells All column, "The Certification of IPC-4101D Polyimide Base Materials: Buyer Beware." The article raises interesting questions about the IPC 4101 classification system, primarily, how is a pure resin defined?
Living Up to Their Name at Alpha Assembly Solutions
At SMTAI in October, I-Connect007's Judy Warner spent some quality time with Alpha Assembly Solutions' Jason Fullerton, to discuss Alpha's innovative new products. Fullerton also discussed a paper he was presenting, which compares two lead-free, silver-free alloys in a selective soldering application.
What’s New with IPC’s Validation Services
During this year’s IPC Fall Committee Meetings, held in conjunction with SMTAI in Chicago, I met with my friend Randy Cherry, director of IPC Validation Services. Since the inception of Validation Services three years ago, I’ve conducted video interviews with Randy at IPC APEX EXPO, and I've been tracking the growth and progress of this program. I decided that this would be a great opportunity to do a mid-year check-up on IPC’s Validation Service programs.
IPC Validation Services Audit Program to Include Laminate, Prepreg Manufacturers
Essex Technologies’ Doug Sober is a long-time IPC chairman who is now also working with IPC’s Validation Services division. I met with Doug while at the recent SMTA International conference, and we discussed the upcoming audit program for laminate manufacturers, which is ready to go.
Schoeller Electronics Presenting a New Organizational Structure in North America
At the recent SMTA International show in Rosemont, Illinois, I met Padraig McCabe at Schoeller Electronics Systems’ booth. It was obvious that they had a lot going on so it was good to be able to sit down and get the full story of their new organizational structure, name change and the recent acquisitions of PCB companies.
Patty’s Perspective: Take Me to Your Leader
We must have touched a real hot button when we decided to do this issue on leadership. When we sent out our survey on the topic, we received a lot of responses, which we’ll review in a separate article, plus many of our regular columnists were inspired to write on the subject.
Let's Talk Testing: Don’t Reinvent the Wheel—Find an Expert!
Back in the day when I was an engineer fresh out of college, I quickly learned that experience is the solution to many problems. Now that being said, experience comes in many forms…it could be knowledge learned from a textbook, it could be an observatory comment jotted down in a notebook, it could be a conversation with a co-worker or colleague, or it could be an Internet search that finds a scholarly technical article, etc.
One World, One Industry: Voting—A Civic Duty and Industry Opportunity
On Tuesday, November 8, more than 240 million people in the United States will have the opportunity to go to the polls and vote, make their voices heard in government, and influence the direction of public policy for years to come. Much of the world is closely watching with interest in this major U.S. election.
Sensible Design: The Little Guide to Resins
I would like to start this series of columns by going back to basics, questioning the core rationale for potting and encapsulation with resins, their fundamental chemistries and how each resin type differs one from the other—indeed, how their individual properties can be exploited to maximise performance under a wide range of environmental conditions.
Disruptive Technologies– VR, AR and Star Trek
This article and subsequent follow-ups will cover various disruptive technologies. During the planning stage for this month’s issue of The PCB Magazine, I was asked to consider a number of potential topics; two of them are areas that I am very interested in—augmented reality (AR) and virtual reality (VR), and 3D printing and security.
Geek-A- Palooza: Get Your Geek On in Minnesota!
If you haven’t been to Geek-A-Palooza yet, you may just get a chance, because the social networking event could be coming to your city in the near future. Barry Matties met with founder Tara Dunn following the most recent Boston event, to learn more about Geek-A-Palooza and why the laid-back atmosphere is beneficial for both the sponsors and the attendees.
Institute of Circuit Technology Hayling Island Seminar 2016
In recent years, the Hayling Island Seminar has become established as the most popular date on the Institute of Circuit Technology calendar and, as expected, the 2016 event attracted a large gathering of industry professionals to the south coast of England to share knowledge and experience and to discuss current developments.
This month, I was a guest at the High Density Packaging Users Group (HDPUG) meeting in Nashville, Tennessee. The consortium, composed of more than 50 companies (small and large) in the electronics packaging supply chain, conducts projects to solve real world problems or develop data for product parameters, package/component life, and production processing.
EIPC Reliability Workshop, Tamworth, UK, September 22, 2016
EIPC’s reliability workshop, presented in cooperation with Amphenol Invotec, attracted a capacity audience from eight countries—some delegates having travelled from as far away as Russia—to take the opportunity to learn first-hand how to meet OEM, ODM and EMS product quality and safety requirements, and to understand how interconnection stress testing techniques could be applied to determine the reliability of multilayer PCBs.
IPC Certification Program's 'Space Hardware Addendums' Training and Certification
In this article, Sharon Montana-Beard of Blackfox discusses the IPC Certification Program's Space Hardware Addendums training and certification, the topics covered in the training course, and the benefits of the program.
Ionics EMS Talks Industry 4.0, Mil/Aero Opportunities, and Supply Chain
In an interview with SMT Magazine, Dr. Jay Sabido, president and COO of Ionics EMS Inc., discusses a wide range of topics, including Industry 4.0, automation, and the challenges in the military and aerospace industry, including lead-free, counterfeit components, and traceability.
John Cardone on Designing Flex for Spacecraft
If you watched footage of the Mars rover driving all over the red planet, you’re familiar with some of John Cardone’s handiwork. He’s been designing rigid, flex, and rigid-flex circuitry for spacecraft since he joined JPL in the early ‘80s, and he’s worked on some of the more ground-breaking flex circuits along the way. Now John runs his own design service bureau, JMC Design Services, and he continues to design circuitry for things that blast off. I caught up with John recently and asked him to give us the straight scoop on designing boards for spacecraft.
Mil/Aero Markets: F-35 Declared Combat-Ready
Electronic subsystems are an integral part of all modern military fighter jets, with a substantial portion of the electronics supporting intelligence, surveillance and reconnaissance (ISR) systems, electro-optical/infrared (EO/IR), avionics, munitions and radar related subassemblies. This equates to a very high content of PCBs and SMT assembly requirements.
Asteelflash on Mil/Aero Challenges, ITAR, and Opportunities
In an interview with SMT Magazine, Albert Yanez, corporate executive VP and president of Asteelflash, Americas, discusses the challenges in the military and aerospace industries, ITAR compliance, and the opportunities in these sectors.
The Blackfox Advanced Manufacturing Program for Military Veterans
You might be wondering why you should hire a military veteran, especially if your company has nothing to do with the military. But hiring veterans can bring a wealth of benefits, and this article highlights them. It also focuses on the Blackfox Veteran’s Training Program, the first program of its kind to provide veterans with little to no industry experience with the skills to grow their careers in the electronic assembly industry.
Let's Talk Testing: Does your Product have a Military Application?
Just like any other industry segment within the circuit board world, the military sector has its own share of documents…and likely many more than most! These documents have been developed over the years to guide, shape, and test anything and everything that might go into a jet fighter, a radar system, a warship, a weapons system, etc.
RapidScat Team Investigating Power System Anomaly
Mission managers at NASA's Jet Propulsion Laboratory, Pasadena, California, and NASA’s Marshall Space Flight Center, Huntsville, Alabama, are assessing two power system-related anomalies affecting the operation of NASA’s ISS-RapidScat instrument aboard the International Space Station.
Patty's Perspective: Are We Flying Yet?
Walt Custer is on a photo safari in Africa and suggested I take a look at some of his slides regarding the military/aerospace market and then give a little report on it. Well, I am no Walt Custer, so while I can tell you a bit about where things are, far be it from me to make predictions.
The European Space Agency on Reliability
Stan Heltzel is a materials engineer working for the European Space Agency, and he is tasked with the job of procuring and qualifying PCBs that end up in satellites. I met with Stan at EIPC’s Summer Conference to discuss his presentation on qualifying a fabricator, his role at the ESA, and updating of space standards.
Integrated Manufacturing Solutions: an EMS, ODM, CM, and OEM!
Robbin Thompson, VP Business Development at San Diego-based contract manufacturer Integrated Manufacturing Solutions (IMS), speaks with I-Connect007's Barry Matties and Judy Warner about her company's expansion, production capabilities and product lineup, as well as the culture at IMS.
Multiple Markets Merge for PCBs at H&T Global
While at the SMTA-Ohio expo I met Rob DiGiovanni, VP of sales and marketing with H&T Global, a printed circuit manufacturer based in Florida. I was attracted to the H&T booth by a large photo of an Army jeep. I wanted to learn what this particular photo had to do with PCBs, and Rob had a ready answer.
A Day with Pete (Starkey)
Usually the one conducting the interviews, I-Connect007’s own Pete Starkey recently found himself on the other side of the microphone when I spent time with him in his hometown of Market Bosworth, England. There, between hiking and gardening, we found time to discuss Pete’s rich history in the PCB industry and the many changes and surprises he’s seen in the manufacturing process over the years.
Shane Whiteside and Summit Interconnect: Aspiring to New Heights
A few weeks ago I was privileged to meet with Shane Whiteside in Anaheim, California, at KCA Electronics. Whiteside, former COO of TTM, has helped launch a new company—Summit Interconnect— which encompasses the recent acquisition of KCA Electronics and Marcel Electronics International. Once again assuming an executive role, this time as CEO and president, Whiteside shared his story, strategy and vision for this new chapter.
Lab Tests Armored Vehicles with Auto Industry 'Dummies'
In an unassuming warehouse on Aberdeen Proving Ground, Maryland sit nearly 50 men in uniform, waiting for their mission during an upcoming test event. They're sporting Army Combat Uniforms, standard-issue boots, a crane hook protruding from their heads, and a plethora of color-coded wires spilling out the back of their necks.
Designing With Tighter Tolerances
David Ledger-Thomas is a PCB design engineer with Honeywell Aerospace. He’s spent decades designing PCBs for a variety of applications, including defense, aerospace, computers, and high-performance audio. I asked David to share some of his thoughts on designing high-tech boards with increasingly finer spaces, traces and pitch.
Designers Notebook: Specifying Lead-Free Compatible Surface Finish and Coating for Solderability and Surface Protection
A majority of the components furnished for electronic assembly are designed for solder attachment to metalized land patterns specifically designed for each device type. Providing a solder process-compatible surface finish on these land patterns is vital; however, selection of the surface finish on the circuit structure, whether plated or coated, can be greatly influenced by the components’ terminal metalization and the specific alloy composition used for the assembly process.
The 21st Century PCB Factory– Designed to Eliminate Offshore Cost Advantages
Over 15 years have passed since North America and Europe ceased being the center of worldwide PCB fabrication and were supplanted by a Chinese market with low-cost labor, lax environmental requirements, and strong government support. In just a few short years, the superior offshore cost advantages of this new dynamic put volume PCB production in the West out of business, aside from the military and specialty technology applications contained in the few shops that continue to exist today.