ACE to Conduct August 10 Selective Soldering Workshop in Chandler, Arizona
July 22, 2016 | ACE Production Technologies Inc.Estimated reading time: 2 minutes
ACE Production Technologies, Inc., a leading supplier of selective soldering systems, lead tinning systems and lead tinning services, is pleased to announce that it will host a selective soldering workshop in Chandler, Arizona in conjunction with Phase 4, Inc.
The workshop will be held on Wednesday, August 10, 2016 at TechShop, 249 East Chicago Street in Chandler, Arizona. This technical workshop will include a classroom process training session followed by a Q&A session and one-on-one discussion after the workshop is concluded.
Who Should Attend
- Process Engineers
- Manufacturing Engineers
- Production Technicians
- Quality Personnel
What They Will Learn
- How to improve your selective soldering effectiveness
- Programming tips and tricks
- How to reduce selective soldering defects
- Advanced process troubleshooting techniques
- How to reduce post-solder rework and increase yields
This classroom session focuses on the technical aspects of the selective soldering process and describes the process variables to enhance the flexibility, reliability and quality provided by all types of selective soldering equipment. Your questions about using a selective solder process, and differences in process parameters when working with tin-lead and lead-free solder alloys will be answered during this course. Topics Include:
- Fundamentals of through-hole soldering
- Solderability issues
- Lead-free and tin-lead solder alloys
- Flux deposition and flux activation
- No-clean processing
- Design guidelines
- Quality measurement
- Process troubleshooting guidelines
- Process optimization methods
This workshop entitled “Mastering Selective Soldering Processing and Manufacturability” features a combination of classroom curriculum and hands-on training that is designed to educate and enhance an attendee’s working knowledge of the overall selective soldering process. This workshop will be presented by well-known process expert Bob Klenke, Principal Consultant with ITM Consulting. He has more than 15 years of direct hands-on experience with selective soldering technology and is a frequent instructor for selective soldering, wave soldering and X-ray inspection workshops at APEX and SMTA International conferences.
This highly informative workshop is offered at no cost to all attendees courtesy of ACE Production Technologies and Phase 4, Inc. and covers all aspects of the solderability testing and component re-tinning processes. For more information about this one of a kind solderability testing and component lead tinning workshop, or to register for the workshop, contact Tom Dunn at tdunn@phase4inc.com or call either 480-966-2018 or 602-524-6431.
About ACE
ACE Production Technologies, Inc. designs and builds simple and affordable selective soldering and lead tinning systems suitable for lead-free and tin-lead electronics assembly. ACE’s complete line of rugged and reliable selective soldering systems all feature lead-free compatible solder pots and are ideal for low, medium or high volume production. ACE also provides solderability testing, lead tinning services and process development services. For more information, click here, call 509-924-4898 or email sales@ace-protech.com.
Suggested Items
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.