Today’s MilAero Options: Outsourcing—‘Everybody’s Doing it’ Not so True Today
June 27, 2016 | Marc CarterEstimated reading time: 2 minutes
History
There was a time, not so many decades ago, when that most commonly-stated mantra (“lower labor costs”) behind offshoring printed circuit fab (and some assembly) operations, still had some case-by-case validity. There were other drivers that could and did apply in some cases, including:
- Availability of the latest in production technology (backed by governmental investment, favorable tax status, long-term strategic investment strategy vs. short-term profits)[1]
- Simple geography, both for those with major East Asia markets and where necessary intermediate manufacturing inputs (notably electronic components, modules, displays, etc.) are manufactured nearby[2]
- Overt or hidden “China content” requirements imposed by state and quasi-state organizations (CATIC, etc.) as condition of sale of completed equipment into China
- Outsourcing “in crowd trend” (“..if company ‘X’, our major competitor or main customer is outsourcing to China, they must have research that justifies the move…”). The “Fad diet” justification.
The relative weights given those factors in the decision process varied wildly between organizations, and (naturally) affected the likelihood of success of the outsourcing venture[3].
Even a well-reasoned and thoughtful “correct” (at the time) decision may need re-thinking if the underlying factors change, and, in regards many of the factors behind choices to outsource manufacturing operations to China, things have certainly changed.
Present Day
Considering ONLY the labor cost of production metric, the decisive advantage in labor cost contribution to the cost of goods produced that China enjoyed in the mid- to late-1990s has all but disappeared. Wages in the manufacturing sector in China, on average, increased eight-fold between 1995 and 2009. As recently as last year, the regional wage differences across China were still driving manufacturing operations there further inland to the Western provinces, but even that is starting to shift to even lower-cost labor pools elsewhere in SE Asia[5]. U.S. productivity advantages have eroded in relative terms, but are still much higher than in China[4], such that the manufacturing output per outlay (“effective labor cost”) is only slightly lower in China than in the U.S., by some calculations, around 4%[6].
There are other factors at work here, as well. With the increased standard of living, expectations have changed, labor relocations from low-paying regions to high-paying regions have highlighted inequalities, and overcapacity, automation, and reduced global demand have raised the dual Chinese dragons of “layoffs” and “strikes” to alarming levels. Beijing’s responses have reflected uncertainty, unfamiliarity with the problem, and inconsistency. Some parallels between the current situation in China and the events leading to the surprising Polish Solidarity phenomenon have been mentioned[7,8]. Automation improvements and technology shifts further reduce the importance of wages in determining production location[9].
References
1. H.Nakahara (NT Information Ltd.) comments in Custer Consulting Group Daily News, 21 March 2016; CNN, Manufacturing.net articles referencing Oxford Economic Reports, “China Labour Costs Only 4 Percent Below US.”
2. “Geography and offshoring to China,” Ma and Assche, Voxeu.org.
3. “Strategic Outsourcing: the Good, the Bad, and the Ugly,” Ligus, Rockford Consulting.
4. “Global Supply Chain Growth Set to Slow Amid Technology, Labor Changes,” Whelan, Wall Street Journal.
5. “Made in China' labor is not actually that cheap,” Yan, Money.cnn.com.
6. “Report: China Labor Costs Only 4 Percent Below US,” Szal, Manufacturing.net.
7. “Striking Workers Bad For Business in Waning Chinese Industry,” Soergel, US News and World Report.
8. “China on Strike,” Griffiths, CNN.com.
9. “Global Supply Chain Growth Set to Slow Amid Technology, Labor Changes,” Whelan, Wall Street Journal.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/10/2024 | Marcy LaRont, PCB007 MagazineSpring is a renewal each year as dormant flora bloom, and baby ducklings and geese are ever present in local bodies of water. Even though it is beginning to get hot, I love this time of year in Arizona, with the sun waking me around 5 a.m. It fills me with an energy that I often lose in the dark winter months. Wherever you find yourself in the world, I hope you are enjoying Spring and that you are filled with energy and enthusiasm for all the great work part of our daily lives in this industry.
ViTrox Presents Next-Gen Intelligent Manufacturing Solutions at SEMICON Southeast Asia 2024
05/10/2024 | ViTroxViTrox, which aims to be the world’s most trusted technology company, is pleased to announce its participation as an exhibitor and Platinum sponsor at SEMICON Southeast Asia 2024! Join us from May 28-30 at Booth #1504 in Malaysia International Trade and Exhibition Centre (MITEC), KL, to experience our advancement in technology and manufacturing.
Podcast Review: On the Line with… Designing for Reality
05/09/2024 | Duane Benson, Positive Edge LLCAs a technologist, if I were forced to come up with just one recurring theme that I might call a professional “nemesis,” it would be the difference between theory and reality. A lot of technology we have at our disposal works well in theory but falls short when reality hits. That’s not the only reason I chose to listen to and review On the Line with… Designing for Reality, featuring a series of conversations with ASC Sunstone’s Matt Stevenson, but it certainly helped that the title caught my eye.
NEOTech Positions Itself as Microelectronics Industry Leader with High-Technology Investments
05/09/2024 | NEOTechNEOTech, a leading provider of electronic manufacturing services (EMS), design engineering, and supply chain solutions in the high-tech industrial, medical device, and aerospace/defense markets, announces a significant investment in acquiring new Palomar 8100 wire bonder machines, enhancing the company’s positioning as a leader of cutting-edge microelectronics assemblies for mission-critical applications.
MKS’ Atotech, ESI to Participate in CPCA Show
05/09/2024 | MKS’ AtotechMKS’ Atotech, and ESI will participate in the CPCA Show 2024. The show will be held from May 13 to 15, 2024, at the National Exhibition and Convention Center (Shanghai) and will bring together domestic and international manufacturers in the electronic circuit industry.