IPC President John Mitchell on the Past, Present, and Future, Part 1

Reading time ( words)

Along with newest IPC Hall of Famer and I-Connect007 Editor, Patty Goldman, I sat down with IPC President John Mitchell on the show floor at IPC APEX EXPO to discuss the event, the changes on the IPC board, and the key metrics that IPC uses to measure their own performance and effectiveness. John also invites the industry to a unique challenge.

Barry Matties: First of all, great awards ceremony. We are so happy that Patty Goldman is now an IPC Hall of Famer.

John Mitchell: Yes, our newest Hall of Fame member. Patty has been wonderful. She has been an active IPC volunteer for 35 years.

Matties: It's nice, and we've known Patty for nearly 30 years as well. My goodness it's been a long time. We were much younger when we got started.

pattyandjohnm.jpgMitchell: Fifty’s the new thirty. That's what I'm going for. I turn 50 this year. I'm going for 150 so I figure I'm one-third done. I've got to figure out what to do with the next two-thirds of my life.

Matties: It's not completely unrealistic.

Mitchell: It's crazy with the advances in technology on all fronts. We heard a few of them from the Tuesday keynote. Dean Kamen is doing some good stuff. I got to know him a little bit when I worked at Bose. Bose and Dean’s group, DEKA, had a lot of bright people moving back and forth. In fact, one of the icons of Bose worked for him for a decade afterwards. He left Bose and went to work for Dean. In the early history of the Segway, I met him because I was working in the automotive group. There was some exploration about putting sound on a Segway…always cool things happening around Dean and Bose.

He’s just a good guy with a great vision. I love what he's doing for the future of engineering in his FIRST program, and actually it’s not finalized yet, but hopefully by summer IPC will be an interesting part of that.

Patty Goldman: That's great to hear.

Matties: Bringing young people into the industry and getting them when they're young is the right move for sure. This man is committed and passionate about it, there's no doubt.

Mitchell: Yes, and then our Wednesday speaker, Peter Singer, was also great. He talked about a derivative topic from what we heard during the previous day’s keynote, which was how technology can be used. We all go into it starry-eyed and say, “This is a cool, neat thing,” but you've got to be thinking about how somebody is going to try to use that in different ways than what we might have intended for that technology. He talked about the Internet of Things and how 70% of all devices deployed are vulnerable to hacking.

Goldman: Yeah, used and abused.

Mitchell: Exactly. It’s a paradigm shift because, as he was saying, medical companies, for example, that provide things like tongue depressors, just need to know if it fixed your problem. That's all they've had to think about. If it did, great, we’ll license it and go out. Now what they have to think about is, “Can I hack your body and into your pacemaker,” —which has a Wi-Fi or Bluetooth or other connection to your device so you can monitor it. Yet, somebody else can come in and go, “I think I'm just going to stop that.”

Matties: It changes everything.

Mitchell: It's a whole new world. He said he was going to talk to us about some scary stuff, but we’ve got to think a little bit about security and we just have to get better. Then, he talked about how it used to be the defense segment that led development, and now it's really the private sector that leads it because the defense groups don’t have the budgets or the turn-around time.

According to Dr. Singer, the British Air Force, or their defense contractors, apparently built a drone and we all know how long and expensive a process that can be. However, a group of college students said, “We think we can build a better drone. Let's see how fast we can do it and actually make it work.” They did it in seven days—from design to production prototype—and then flew it.

Goldman: They flew it on the seventh day.

Mitchell: Think about how long our aerospace groups take to develop something like that, and these college students did it in seven days. That's doing 3D printing and all that good stuff.

Matties: It's amazing what you can accomplish when you really try.

Mitchell: Isn't it?

Goldman: And you don’t have a lot bureaucracy around you.

Mitchell: No barriers. Do whatever you want, however you want to do it, just make it work. In Dean’s discussion of specs, he said, “Normally there are all these specifications that take forever to create.” When discussing the spec for a human arm replacement, Dean shared that the spec was quite simple for the customer to describe to him. He continued, “Here’s the definition for the robotic arm [for a human]: pick up a raisin and eat it; pick up a grape and eat it. There’s your spec.” That's all you need to do.

I love the practical aspect of this because it spoke volumes to the complexities that we trying to create a spec and get it exactly right. They said, “No, this is just what you want to do. We’re done. When you can do that, come call us.”

Matties: Also, during the awards program yesterday there was some shifting of board members going on. How's that going to change?




Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

01/08/2021 | Nolan Johnson, I-Connect007
It’s a new year, and time for new resolutions and new beginnings. “New year, new you” certainly is reflected in this past week’s news. We saw several announcements regarding mergers, acquisitions, and organizational changes, plus some government legislation to help kick off the new year. Based on viewing activity, readers were keen to keep up on the changes under way.

IPS Expanding to Accommodate Growing Market

11/24/2020 | Barry Matties, I-Connect007
I recently had the opportunity to visit IPS in their Cedar City, Utah, facility, where Mike Brask, founder and president of IPS, shared his business strategy and gave me a tour of the expanding manufacturing facility. IPS produces a wide range of PCB manufacturing equipment, including plating, DES, VCM, VRPs, ventilation, and spare parts for older equipment.

I-Connect007 Editor's Choice: Five Must-Reads for the Week

11/20/2020 | Andy Shaughnessy, Design007 Magazine
In my top five picks, we have news about columnist Tara Dunn moving to Averatek to work with their A-SAP additive processes, and an interview with Audrey Sim regarding the “hybrid” model adopted by the HKPCA for its upcoming Electronic Circuits World Convention. We also have a compilation of the questions that readers have asked Joe Fjelstad and news about DownStream Technologies adding support for flex, rigid-flex, and embedded component designs. Finally, we share a review of some of KYZEN’s new training sessions on cleaning electronic assemblies—virtual courses that pack a lot of information into 15-minute snapshots. Knowing how tight everyone’s schedules are now, 15-minute events might be the ticket.

Copyright © 2021 I-Connect007. All rights reserved.