ACE to Exhibit New Innovative Soldering Technologies at IPC APEX EXPO 2016


Reading time ( words)

ACE Production Technologies Inc., a supplier of selective soldering systems, lead tinning systems and lead tinning services, will exhibit new innovative soldering technologies in Booth 2022 at the IPC APEX Expo, scheduled to take place March 15-17, 2016 at the Las Vegas Convention Center in Las Vegas, Nevada.

A complete range of standalone selective soldering systems including the popular KISS-102 and in-line systems such as the KISS-101IL, KISS-103IL and dual pot KISS-103ILDP will be on display. All systems are equipped with graphics-based software and include automatic fiducial correction and board warp compensation as standard features at no additional cost.

Premiering at APEX, is the LTS300-JEDEC which is the most technologically advanced molten solder lead tinning system on the market consisting of two dynamic nitrogen inerted solder pots, a dynamic flat wave fluxing station, forced convection preheating, aqueous wash and drying stations, plus a JEDEC tray stacker forming a complete component re-tinning work cell.

At the heart of the new LTS300-JEDEC is a fully integrated vision system consisting of top and bottom viewing cameras for accurate alignment of electronic components prior to re-tinning to ensure complete control over fine-pitch components during immersion and extraction of the hot solder dip process. The vision system also performs post-tinning inspection to detect potential solder bridges before placing components back into a JEDEC tray. The LTS300-JEDEC is a fully-configured system capable of performing a molten solder component lead tinning process for gold removal and re-tinning of components for Class 2 and Class 3 applications in compliance with the new J-STD-001, Rev F requirements.

Also on display will be the revolutionary STS-202 dip and look solderability test system. The new ACE solderability tester is capable of performing solderability testing to determine the solderability of component leads and terminations prior to being joined in a soldering operation. The system utilizes the proven dip and look test method in conformance with all IPC, ANSI and MIL standards including J-STD-002, MIL-STD-883 Method 2003 and MIL-STD-202 Method 208.

Share




Suggested Items

Solder Paste Printing and Optimizations for Interconnecting Back Contact Cells

07/26/2022 | Narahari S Pujari and Krithika PM, MacDermid Alpha Electronics Solutions
The interdigitated back contact (IBC) is one of the methods to achieve rear contact solar cell interconnection. The contact and interconnection via rear side theoretically achieve higher efficiency by moving all the front contact grids to the rear side of the device. This results in all interconnection structures being located behind the cells, which brings two main advantages. First, there is no frontside shading of the cell by the interconnection ribbons, thus eliminating the need for trading off series resistance, losses for shading losses when using larger interconnection ribbons. Second, a more homogeneous looking frontside of the solar module enhances the aesthetics.

Optimizing Test Engineering Practices for High-Mix Electronics Manufacturing

08/01/2022 | Mark Laing, Siemens Digital Industries Software
For PCB and assembly manufacturers, test engineering has become a critical factor in enhancing the profitability of new product introductions (NPIs). Given the trend toward high-mix, low-volume production, the journey from design data to an automated PCB testing program must be quicker and more efficient than ever before. In this article, we will discuss how to optimize the efficiency of the test engineering process in accordance with these new market realities.

Time to Get Serious About CMMC Readiness

07/13/2022 | I-Connect007 Editorial Team
Divyash Patel of MX2 Technology is a leading cybersecurity expert who’s sounding the alarm about getting your company into a state of readiness. But he’s not yelling fire in a theater. Whether it’s aligning with DoD’s CMMC, or just ensuring your company’s data and processes are protected, Divyash can see what’s coming. “This is a must-have compliance program,” he says. “It needs to be taken seriously and maintained.”



Copyright © 2022 I-Connect007. All rights reserved.