Squad X Core Technologies Takes First Steps toward Improving Capabilities for Dismounted Soldiers and Marines


Reading time ( words)

To succeed in their missions, military units must have a robust, multi-faceted picture of their operational environments, including the location, nature and activity of both threats and allied forces around them. Technology is making this kind of rich, real-time situational awareness increasingly available to airborne and other vehicle-assigned forces, along with a capacity to deploy precision armaments more safely, quickly and effectively. Dismounted infantry squads, however, have so far been unable to take full advantage of some of these highly effective capabilities because many of the technologies underlying them are too heavy and cumbersome for individual Soldiers and Marines to carry or too difficult to use under demanding field conditions.

To address this application lag, DARPA’s Squad X Core Technologies (SXCT) program aims to develop novel technologies that could be integrated into user-friendly systems that would extend squad awareness and engagement capabilities without imposing physical and cognitive burdens. The program, whose overarching goal is to ensure that Soldiers and Marines maintain uncontested tactical superiority over potential adversaries, recently awarded Phase 1 contracts to nine organizations.

“Our goal is to develop technologies that support a three-dimensional common operating picture leveraging input from integrated mobile sensors, as well as the ability to organically locate and identify friendly forces and threat locations in near real time,” said Maj. Christopher Orlowski, DARPA program manager. “The Phase 1 performers for SXCT have proposed a variety of technologies that, in the future, could provide unprecedented awareness, adaptability and flexibility to dismounted Soldiers and Marines and enable squad members to more intuitively understand and control their complex mission environments.”

DARPA has awarded Phase 1 contracts for SXCT to the following organizations:

  • Helios Remote Sensing Systems (Utica, N.Y.)
  • Kitware (Clifton Park, N.Y.)
  • Leidos (Huntsville, Ala., and San Diego, Calif.)
  • Lockheed Martin Corporation (Cherry Hill, N.J., and Grand Prairie, Tex.)
  • Raytheon Company (Tucson, Ariz.)
  • Scientific Systems Company, Inc. (Woburn, Mass.)
  • Six3 Systems, Inc. (Mclean, Va.)
  • SoarTech (Ann Arbor, Mich.)
  • SRI International (Menlo Park, Calif.)

SXCT is pursuing research in the following four technical areas:

  • Precision Engagement: Precisely engage threats out to 0.6 mile (1,000 meters), while maintaining compatibility with infantry weapon systems and without imposing weight or operational burdens that would negatively affect mission effectiveness. Capabilities of interest include distributed, non-line-of-sight targeting and guided munitions.
  • Non-Kinetic Engagement: Disrupt enemy command and control, communications and use of unmanned assets at a squad-relevant operational pace (walking with occasional bursts of speed). Capabilities of interest include disaggregated electronic surveillance and coordinated effects from distributed platforms.
  • Squad Sensing: Detect potential threats out to 0.6 mile (1,000 meters) at a squad-relevant operational pace. Capabilities of interest include multi-source data fusion and autonomous threat detection.
  • Squad Autonomy: Increase squad members’ real-time knowledge of their own and teammates’ locations to less than 20 feet (6 meters) in GPS-denied environments through collaboration with embedded unmanned air and ground systems. Capabilities of interest include robust collaboration between humans and unmanned systems.

The U.S. Army, U.S. Navy and U.S. Marine Corps have expressed interest in future SXCT capabilities.

Share

Print


Suggested Items

What It Takes to Be a Milaero Supplier, Part 2

03/24/2020 | Anaya Vardya, American Standard Circuits
The decision to pursue military and aerospace (milaero) certification impacts every facet of the organization, and not every shop is prepared to make this transformation. In Part 2, Anaya Vardya focuses on what it takes to be a milaero supplier in the areas of engineering and CAM.

Requirements of Being a MIL-certified Shop

11/12/2019 | Barry Matties, I-Connect007
Barry Matties speaks with American Standard Circuits’ VP of Business Development David Lackey, who has nearly 40 years of experience producing PCBs for the mil/aero market. David talks about what it’s like being a MIL-certified shop and the stringent quality and reporting requirements that it entails.

How to Dismantle a Nuclear Bomb

10/01/2019 | Peter Dizikes, MIT News Office
How do weapons inspectors verify that a nuclear bomb has been dismantled? An unsettling answer is: They don’t, for the most part. When countries sign arms reduction pacts, they do not typically grant inspectors complete access to their nuclear technologies, for fear of giving away military secrets.



Copyright © 2021 I-Connect007. All rights reserved.