Valtronic Strengthens X-ray Inspection Capability with Purchase of Nordson DAGE System


Reading time ( words)

Valtronic, manufacturer of miniaturized electronic products for trusted medical device partners, announces that it purchased and is in the process of configuring an XD7500VR Jade FP X-ray system from Nordson DAGE on its production floor in Ohio. The machine will be live before the end of the year.

According to Randy Meyer, Valtronic Process Engineer and Senior Expert - Advanced Electronics, the system will be used for in-process inspection of BGA and wire bonded devices. Additionally, it will be used as an analytical tool to verify, troubleshoot and improve Valtronic’s internal processes.

The XD7500VR Jade FP from Nordson DAGE provides superior X-ray image quality for all PCBA X-ray inspection applications in the value-oriented market segment and uses the latest technology flat panel detector, providing a market-leading, cost-effective approach where high-quality, real-time imaging is needed for production tasks. The long lifetime CMOS digital detector with 1.3 Mpixels features 10 fps full-frame real-time image acquisition and real-time image enhancements for easier fault finding.

About Valtronic

We innovate and manufacture miniaturized electronic products for our trusted medical device partners. We produce integrated electronic and mechanical products. Our customers are leading global suppliers of medical implants and devices, diagnostic imaging equipment and sensitive aerospace and industrial assemblies. For over 30 years we have helped hundreds of companies develop and produce Class II & III medical devices and advanced miniaturized electronic assemblies.

Share

Print


Suggested Items

Process Ionic Contamination Test (PICT) Standard Roundtable With Industry Experts

04/22/2020 | I-Connect007
With standards committees set to release the first of four new test standards, industry experts discussed the process ionic contamination test (PICT) standard, which was recently approved by the IEC for publication. Roundtable participants included Teresa Rowe, senior director of assembly and standards technology at IPC, Graham Naisbitt, chairman and CEO of Gen3, Jason Keeping, corporate process development at Celestica, and Doug Pauls, principal materials and process engineer at Collins Aerospace.

SMTA Europe’s Electronics in Harsh Environments Conference and Exhibition: A Taste of Things to Come

04/14/2020 | Pete Starkey, I-Connect007
SMTA Europe’s Electronics in Harsh Environments Conference has become a must-attend annual event; unfortunately, it also became another casualty of the COVID-19 lockdown. Scheduled to take place in Amsterdam, the Netherlands, from April 21–23, 2020, it has now been postponed until December 1–3. Pete Starkey reports on a preview seminar presented by SMTA Europe.

This Month in SMT007 Magazine: Exclusive Interview With Burt Rutan, Aerospace Legend

04/03/2020 | I-Connect007 Editorial Team
If you follow advancements in aerospace technologies and expeditions, then you know the name Burt Rutan. Described by Newsweek as “the man responsible for more innovations in modern aviation than any living engineer,” Rutan is a bold visionary with a passion for the advancement of technology, who has designed 46 aircraft throughout his career. Following his IPC APEX EXPO keynote presentation, Rutan stopped by the I-Connect007 booth and shared his thoughts on a wide variety of topics.



Copyright © 2020 I-Connect007. All rights reserved.