Dymax White Paper Explains Switching from Conventional Lamp to LED Light-Curing Sources


Reading time ( words)

Dymax Corporation’s new white paper, Ensuring Success When Switching from Conventional Lamp to LED Light Curing Sources, discusses topics such as how LED curing works, the advantages to LED curing, and getting enough information to switch successfully.  LEDs, or light emitting diodes, continue to gain popularity as a replacement for traditional light bulbs, not only in homes and public buildings, but also for use with light-curable materials (LCMs).  Because of the differences in the technology, making the switch from broad spectrum to LED-curing energy sources is seldom a matter of simply replacing conventional lamps with LED units. 

Success when switching to an LED system depends on careful consideration of all the factors involved, from the LCM to the curing unit selected for the application.  With attention to detail and proper compatibility of all components, along with sufficient adjustments to manufacturing processes, it is certainly possible to enjoy a smooth transition to the benefits of LED light-cure technology. To find out how, download the white paper at www.dymax.com.

Dymax Corporation develops innovative oligomer, adhesive, coating, dispensing, and light-curing systems for applications in a wide range of markets.  The company’s products are perfectly matched to work seamlessly with each other, providing design engineers with tools to dramatically improve manufacturing efficiency and reduce costs.  Major markets include aerospace, appliance, automotive, electronics, industrial, medical device, and metal finishing.

For additional information, visit www.dymax.com or contact Dymax Application Engineering at info@dymax.com or 860-482-1010.

Share

Print


Suggested Items

Part 7 of Siemens’ Digital Twin Webinar Series: Optimizing Inspection and Test Engineering

10/21/2020 | I-Connect007 Editorial Team
Have you ever wondered what digital twin is, how it's used, and its benefits? Are you interested in learning ways to optimize and streamline how data flows from design, production planning, process engineering, and manufacturing? Then this micro webinar series is for you! Throughout this 12-part series, Jay Gorajia from Siemens Industries Software describes how to leverage the digital twin concept—from design to production planning and process engineering—through manufacturing execution and supply chain. The goal of the series is to define a blueprint for organizations seeking to digitalize and optimize their design to manufacturing processes and manufacturing operations.

Part 6 of Siemens’ Digital Twin Webinar Series: Single CAM Solutions

10/14/2020 | I-Connect007 Editorial Team
I-007e Micro Webinars recently released a free, on-demand series titled “Implementing Digital Twin Best Practices From Design Through Manufacturing” with Siemens' Jay Gorajia. In part 6, Gorajia discusses a “Single CAM Solution for All Process Engineering Tasks.”

Part 5 of Siemens’ Digital Twin Webinar Series: Managing the Digital Thread

10/07/2020 | I-Connect007 Editorial Team
I-007e Micro Webinars recently released a free, on-demand series titled “Implementing Digital Twin Best Practices From Design Through Manufacturing” with Siemens' Jay Gorajia. In part 5, Gorajia discusses “Managing the Digital Thread From Design to PCB Assembly Engineering.”



Copyright © 2020 I-Connect007. All rights reserved.