Lockheed Martin Expanding F-35 Assembly Line Capacity For Production Ramp Up
November 17, 2015 | Lockheed MartinEstimated reading time: 1 minute
F-35 prime contractor Lockheed Martin is expanding the capacity of its one-mile, 25-foot long aircraft assembly line facility here so it is capable of producing roughly 200 jets per year by the end of 2019.
The F-35 program will triple its aircraft production and fielding rate by 2019, producing over 120 planes per year. It will deliver about 43 planes next year.
Lockheed Martin is ramping up to a total of 16 mate facilities at full rate production (FRP) from its nine current mate stations, company F-35 Business Development Manager Kevin McCormick said Oct. 28 on a tour of the facility. McCormick said a mate station is where Lockheed Martin brings the four major components of the airframe together: forward, center and aft fuselages and aircraft wings. McCormick said by the time the last of the mate stations is in position by 2018, Lockheed Martin will be at full capacity.
The company manufactures the forward fuselage and wings in Fort Worth while subcontractors BAE Systems makes the aft fuselage in the United Kingdom and Northrop Grumman [NOC] produces the center fuselage in Palmdale, Calif. McCormick said Lockheed Martin utilizes a camera and laser alignment system to get these four major components aligned in a three-dimensional space to minimize steps and gaps. By doing this, the company prevents them from becoming radar reflectors and makes the aircraft low observable.
McCormick said Lockheed Martin is expanding the wing line on the assembly line to make it easier for the company to pick up the aircraft and move it to other mate stations. It currently uses a wing rotation to move the aircraft between mate stations.
Suggested Items
Real Time with... IPC APEX EXPO 2024: Going Vertical: SCHMID's Advanced Solutions for Printed Circuit Boards
04/24/2024 | Real Time with...IPC APEX EXPOEditor Marcy LaRont chats with Bob Ferguson, the president of SCHMID, about advanced solutions for PCBs and the equipment they are highlighting at this year's show. He delves into vertical no-touch handling systems and the prospect of achieving sub-10-micron lines. Inspired by SCHMID's technology, Bob expresses excitement about where the industry is today.
Fineline Global Group Acquires IBR
04/19/2024 | PRNewswireIBR Leiterplatten GmbH & Co. KG joins the Fineline Global Group and is now an integral part of one of the leading suppliers of PCBs. Fine Line Gesellschaft für Leiterplattentechnik mbH acquired 100% shares of IBR.
VDMA: Machine Vision Navigating Through Uncertain Times
04/18/2024 | VDMAFor over a decade, the European machine vision industry has reported steady growth, with turnover increasing by an average of 9 percent annually between 2012 and 2022. Despite a temporary setback in 2020 (minus 4 percent) due to the Covid-19 pandemic, the industry rebounded strongly in 2021 (plus 17 percent) and 2022 (plus 11 percent).
Real Time with... IPC APEX EXPO 2024: A Strategic Market Realignment
04/16/2024 | Real Time with...IPC APEX EXPOMarcy LaRont hosts Thomas Kunz of Schmoll Maschinen GmbH and Kurt Palmer of newly formed Schmoll America to discuss the strategic changes and developments at Schmoll with their departure from Burkle North America in this Real Time with... IPC APEX EXPO 2024 video interview.
What’s New in Design Education at IPC APEX EXPO?
04/11/2024 | Kelly Allen, IPC Training ManagerKelly (Kel) Allen shares her thoughts on the educational offerings at IPC APEX EXPO and beyond. In this interview, she discusses some of the newest classes taking place during the conference in Anaheim, covering everything from design, fab, and assembly through mil/aero, test, and supply chain issues.