Zentech Adds Nordson DAGE Automated X-Ray Inspection Capabilities


Reading time ( words)

Zentech Manufacturing is pleased to announce the addition of the Nordson DAGE xi3400 AXI system. This new Nordson DAGE AXI system offers complete 3D inspection of solder joints and other critical hidden features found in electronic assemblies, PCBs and packaged semiconductors. Ideal for both in-line or off-line operation, the Xi3400’s innovative algorithms enable fast and reliable automated inspection and real-time monitoring of critical process information.  

Utilizing the Nordson DAGE patented Digitial Tomosynthesis Technology, the Xi3400 acquires multiple images in different slice heights in one inspection cycle. The images can discriminate between components on the top and bottom slices of double sided boards for unimpeded automated inspection.

System installation at Zentech is planned for early December. The addition of advanced x-ray capabilities further illustrates Zentech’s commitment to utilizing automated technology equipment sets to assure high quality electronic assemblies are delivered to their customers.

Waleid Jabai, VP of Technology at Zentech comments, “the xi3400 AXI system meets Zentech’s requirements for both high speed and high accuracy in advanced electronic product manufacturing.  The xi3400 AXI’s complex software algorithm and image discrimination between sides of the circuit assembly will provide us with high speed inspection and greatly reduce escapes by eliminating the human error factor -  especially when inspecting BGAs and BTC’s. AXI capability, coupled with our existing SPI and AOI systems, assures our customers that Zentech is committed to the highest quality levels obtainable.”

About Zentech

Zentech Manufacturing, Inc. is a privately held, engineering-driven contract manufacturer specializing in the design and manufacture of highly-complex electronic and RF circuit cards and assemblies. The company is headquartered in its purpose-built facility located in Baltimore, MD and maintains several key certifications, including ISO 9001:2008, ITAR (US State Dept.), AS9100 (aerospace), and ISO 13485 (medical). In addition, Zentech is a certified IPC Trusted Source supplier for Class 3 mission-critical electronics, and the company is IPC J-STD-001 Space Addendum QML certified. For a video drone tour of Zentech, click here.

Point of Contact:  John Vaughan  Vice President, Sales and Marketing

Share

Print


Suggested Items

Part 12 of Siemens’ Digital Twin Webinar Series: MES and Enterprise Systems

11/25/2020 | I-Connect007 Editorial Team
I-007e Micro Webinars recently released a free, on-demand series titled “Implementing Digital Twin Best Practices From Design Through Manufacturing” with Siemens' Jay Gorajia. To conclude the series, in Part 12, Gorajia discusses, “Integrating Valor Solutions as Part of MES and Enterprise Systems."

Part 11 of Siemens’ Digital Twin Webinar Series: Data-Driven Manufacturing

11/18/2020 | I-Connect007 Editorial Team
I-007e Micro Webinars recently released a free, on-demand series titled “Implementing Digital Twin Best Practices From Design Through Manufacturing” with Siemens' Jay Gorajia. In Part 11, Gorajia discusses, “Data-Driven Manufacturing: Making Big Data Into Smart Data.”

Part 10 of Siemens’ Digital Twin Webinar Series: Inventory Management

11/11/2020 | I-Connect007 Editorial Team
I-007e Micro Webinars recently released a free, on-demand series titled “Implementing Digital Twin Best Practices From Design Through Manufacturing” with Siemens' Jay Gorajia. In Part 10, Gorajia looks at “Inventory Management in the Warehouse and on the Shop Floor.” Material accounts for 80% of PCB assembly costs. If not managed correctly, margins can be cut even further.



Copyright © 2020 I-Connect007. All rights reserved.