Scientists Curve Nanoparticle Sheets into Complex Forms
August 3, 2015 | Argonne National LaboratoryEstimated reading time: 4 minutes
Scientists have been making nanoparticles for more than two decades in two-dimensional sheets, three-dimensional crystals and random clusters. But they have never been able to get a sheet of nanoparticles to curve or fold into a complex three-dimensional structure. Now researchers from the University of Chicago, the University of Missouri and the U.S. Department of Energy's Argonne National Laboratory have found a simple way to do exactly that.
The findings open the way for scientists to design membranes with tunable electrical, magnetic and mechanical properties that could be used in electronics and may even have implications for understanding biological systems.
Argonne researchers are able to fold gold nanoparticle membranes in a specific direction using an electron beam because two sides of the membrane are different. Image credit: Xiao-Min Lin et. al, taken at Argonne’s Electron Microscopy Center.
Working at the Center for Nanoscale Materials (CNM) and the Advanced Photon Source (APS), two DOE Office of Science User Facilities located at Argonne, the team got membranes of gold nanoparticles coated with organic molecules to curl into tubes when hit with an electron beam. Equally importantly, they have discovered how and why it happens.
The scientists coat gold nanoparticles of a few thousand atoms each with an oil-like organic molecule that holds the gold particles together. When floated on water the particles form a sheet; when the water evaporates, it leaves the sheet suspended over a hole. “It’s almost like a drumhead,” says Xiao-Min Lin, the staff scientist at the Center for Nanoscale Materials who led the project. “But it’s a very thin membrane made of a single layer of nanoparticles.”
To their surprise, when the scientists put the membrane into the beam of a scanning electron microscope, it folded. It folded every time, and always in the same direction.
“That got our curiosity up,” said Lin. “Why is it bending in one direction?”
The answer lay in the organic surface molecules. They are hydrophobic: when floated on water they try to avoid contact with it, so they end up distributing themselves in a non-uniform way across the top and bottom layers of the nanoparticle sheet. When the electron beam hits the molecules on the surface it causes them to form an additional bond with their neighbors, creating an asymmetrical stress that makes the membranes fold.
Zhang Jiang and Jin Wang, X-ray staff at the APS, came up with an ingenious way to measure the molecular asymmetry, which at only six angstroms, or about six atoms thick, is so tiny it would not normally be measurable.
Subramanian Sankaranarayanan and Sanket Deshmukh at CNM used the high-performance computing resources at DOE’s National Energy Research Scientific Computing Center and the Argonne Leadership Computing Facility (ALCF), both DOE Office of Science User Facilities, to analyze the surface of the nanoparticles. They discovered that the amount of surface covered by the organic molecules and the molecules’ mobility on the surface both have an important influence on the degree of asymmetry in the membrane.
“These are fascinating results,” said Fernando Bresme, professor of chemical physics at the Imperial College in London and a leading theorist on soft matter physics. “They advance significantly our ability to make new nano-structures with controlled shapes.”
In principle, scientists could use this method to induce folding in any nanoparticle membrane that has an asymmetrical distribution of surface molecules. Said Lin, “You use one type of molecule that hates water and rely on the water surfaces to drive the molecules to distribute non-uniformly, or you could use two different kinds of molecules. The key is that the molecules have to distribute non-uniformly.”
The next step for Lin and his colleagues is to explore how they can control the molecular distribution on the surface and therefore the folding behavior. They envision zapping only a small part of the structure with the electron beam, designing the stresses to achieve particular bending patterns.
“You can maybe fold these things into origami structures and all sorts of interesting geometries,” Lin said. “It opens the possibilities.”
About Argonne National Laboratory
Argonne National Laboratory seeks solutions to pressing national problems in science and technology. The nation's first national laboratory, Argonne conducts leading-edge basic and applied scientific research in virtually every scientific discipline. Argonne researchers work closely with researchers from hundreds of companies, universities, and federal, state and municipal agencies to help them solve their specific problems, advance America's scientific leadership and prepare the nation for a better future. With employees from more than 60 nations, Argonne is managed by UChicago Argonne, LLC for the U.S. Department of Energy's Office of Science. For more, www.anl.gov.
About DOE’s Office of Science
DOE’s Office of Science is the single largest supporter of basic research in the physical sciences in the United States, and is working to address some of the most pressing challenges of our time. For more information, please visit science.energy.gov.
Suggested Items
NASA Selects First Lunar Instruments for Artemis Astronaut Deployment
03/27/2024 | NASANASA has chosen the first science instruments designed for astronauts to deploy on the surface of the Moon during Artemis III. Once installed near the lunar South Pole, the three instruments will collect valuable scientific data about the lunar environment, the lunar interior, and how to sustain a long-duration human presence on the Moon, which will help prepare NASA to send astronauts to Mars.
NASA Uses ORNL Supercomputers to Plan Smooth Landing on Mars
03/26/2024 | Oak Ridge National LaboratoryA U.S. mission to land astronauts on the surface of Mars will be unlike any other extraterrestrial landing ever undertaken by NASA.
StenTech to Unveil Cutting-Edge StenTech BluPrint™ CVD Surface Treatment at 2024 IPC APEX EXPO
03/12/2024 | StenTechStenTech® Inc., a leading global company specializing in SMT Printing Solutions, will introduce the new StenTech BluPrint™ Chemical Vapor Deposited (CVD) Surface Treatment at the 2024 IPC APEX EXPO.
Lockheed Martin Awarded $219M To Produce Additional PrSM Units For US Army
03/08/2024 | Lockheed MartinThe U.S. Army has awarded Lockheed Martin a $219 million contract to produce more Early Operational Capability (EOC) Precision Strike Missiles (PrSM).
Reassessing Surface Finish Performance for Next-gen Technology, Part 2
03/04/2024 | Frank Xu, PhD and Martin Bunce of MacDermid Alpha, and John Coonrod of Rogers Corp.The introduction of 5G/6G has created a growing demand for faster rates of data transfer and operation at higher frequencies, pushing signals to travel toward the outer edges of conductors. As a result, the surface finish applied over the copper circuitry is now gaining more attention.