New Lithium Ion Battery is Safer, Tougher, and More Powerful
July 6, 2015 | Institute for Basic ScienceEstimated reading time: 2 minutes
Lithium ion batteries (LIBs) are a huge technological advancement from lead acid batteries which have existed since the late 1850’s. Thanks to their low weight, high energy density and slower loss of charge when not in use, LIBs have become the preferred choice for consumer electronics. Lithium-ion cells with cobalt cathodes hold twice the energy of a nickel-based battery and four-times that of lead acid. Despite being a superior consumer battery, LIBs still have some drawbacks. Current manufacturing technology is reaching the theoretical energy density limit for LIBs and overheating leading to thermal runaway i.e. “venting with flame” is a serious concern.
South Korean researchers at the Center for Self-assembly and Complexity, Institute for Basic Science (IBS), Department of Chemistry and Division of Advanced Materials Science at Pohang University, have created a new LIB made from a porous solid which greatly improves its performance as well as reducing the risks due to overheating.
Since 2002 there have been over 40 recalls in the US alone due to fire or explosion risk from LIBs used in consumer electronic devices. These types of batteries, in all of their different lithium-anode combinations, continue to be an essential part of modern consumer electronics despite their poor track record at high temperatures.
The Korean team tried a totally new approach in making the batteries. According to Dr. Kimoon Kim at IBS, “we have already investigated high and highly anisotropic [directionally dependent] proton conducting behaviors in porous CB[6] for fuel cell electrolytes. It is possible for this lithium ion conduction following porous CB[6] to be safer than existing solid lithium electrolyte -based organic-molecular porous-materials utilizing the simple soaking method.” Current LIB technology relies on intercalated lithium which functions well, but due to ever increasing demands from electronic devices to be lighter and more powerful, investigation of novel electrolytes is necessary in order.
The new battery is built from pumpkin-shaped molecules called cucurbit[6]uril (CB[6]) which are organized in a honeycomb-like structure. The molecules have an incredibly thin 1D-channel, only averaging 7.5 Å [a single lithium ion is 0.76 Å, or .76 x 10-10 m] that runs through them. The physical structure of the porous CB[6] enables the lithium ions to battery to diffuse more freely than in conventional LIBs and exist without the separators found in other batteries.
In tests, the porous CB[6] solid electrolytes showed impressive lithium ion conductivity. To compare this to existing battery electrolytes, the team used a measurement of the lithium transference number (tLi+) which was recorded at 0.7-0.8 compared to 0.2-0.5 of existing electrolytes. They also subjected the batteries to extreme temperatures of up to 373 K (99.85° C), well above the 80° C typical upper temperature window for exiting LIBs. In the tests, the batteries were cycled at temperatures between 298 K and 373 K ( 24.85° C and 99.85° C) for a duration of four days and after each cycle the results showed no thermal runaway and hardly any change in conductivity.
Various conventional liquid electrolytes can incorporate in a porous CB[6] framework and converted to safer solid lithium electrolytes. Additionally, electrolyte usage is not limited to use only in LIBs, but a lithium air battery potentially feasible. What makes this new technique most exciting is that it is a new method of preparing a solid lithium electrolyte which starts as a liquid but no post-synthetic modification or chemical treatment is needed.
Suggested Items
Connect the Dots: Best Practices for Prototyping
09/21/2023 | Matt Stevenson -- Column: Connect the DotsPCB prototyping is a critical juncture during an electronic device’s journey from concept to reality. Regardless of a project’s complexity, the process of transforming a design into a working board is often enlightening in terms of how a design can be improved before a PCB is ready for full production.
The Drive Toward UHDI and Substrates
09/20/2023 | I-Connect007 Editorial TeamPanasonic’s Darren Hitchcock spoke with the I-Connect007 Editorial Team on the complexities of moving toward ultra HDI manufacturing. As we learn in this conversation, the number of shifting constraints relative to traditional PCB fabrication is quite large and can sometimes conflict with each other.
Asia/Pacific AI Spending Surge to Reach a Projected $78 Billion by 2027
09/19/2023 | IDCAsia/Pacific spending on Artificial Intelligence (AI) ), including software, services, and hardware for AI-centric systems will grow to $78.4 billion in 2027, according to International Data Corporation's latest Worldwide Artificial Intelligence Spending Guide.
Intel to Sell Minority Stake in IMS Nanofabrication Business to TSMC
09/13/2023 | IntelIntel Corporation announced that it has agreed to sell an approximately 10% stake in the IMS Nanofabrication business to TSMC. TSMC’s investment values IMS at approximately $4.3 billion, consistent with the valuation of the recent stake sale to Bain Capital Special Situations.
RAF Invests in BAE Systems’ Most Advanced Fighter Pilot Helmet
09/13/2023 | BAE SystemsThe UK Ministry of Defence (MOD) has awarded BAE Systems a contract to develop its Striker II Helmet Mounted Display (HMD) for the Royal Air Force (RAF) Typhoon fleet. The contract, valued at £40m, will create and sustain more than 200 highly-skilled jobs at BAE Systems’ sites in Kent and Lancashire working directly on the Striker II programme. In total, the Typhoon programme sustains more than 20,800 jobs across the UK.