Improving Material Properties of Sodium-ion Batteries
June 29, 2015 | ANSTOEstimated reading time: 2 minutes
The exploding market of hand-held electronic devices powered by lithium batteries is raising the cost of lithium raw materials to the extent that providers of large-scale grid energy storage solutions are looking for other battery solutions.
Sodium-ion batteries that operate at room temperature have shown great promise as a cheaper alternative because sodium is one of the most abundant elements on earth.
Although the concept of rechargeable sodium-ion batteries for energy storage dates back to the 1980s, progress has been stalled by the need to increase energy density and rate performance, lengthen the cycle life and find better electrode materials.
In a recent Nature Communications paper, researchers at ANSTO and the Institute of Physics at the Chinese Academy of Sciences in Beijing, proposed a way to improve the properties of a class of electrode materials to be used in sodium-ion (Na+) batteries by manipulating their electronic structure.
One of the most promising types of crystal structure, the so called “P2-type”, consists of layers of Na+ ions sandwiched between transition metal oxide slabs.
General view of the crystal structure and view along the c axis showing splitting of Na1 and Na2 sites from the centres of prisms.
The structure has some attractive features such as high mobility of Na+ ions and a robust framework but its application has been hindered by the formation of undesirable sodium-ordered superstructures during electrochemical cycling.
“The connection between sodium-ion ordering and charge distribution in the framework was established a long time ago”, says Instrument Scientist Max Avdeev, one of the corresponding authors of the paper.
“However, so far most of the research into breaking the connection was based on combining several electrochemically active transition metals, such as iron, manganese, cobalt and nickel that was either ineffective or had side effects.” he continued.
To probe the effect of inactive ions, a compound, Na0.6(Cr0.6TiO4)O2 was synthesised and thoroughly investigated electrochemically and by neutron scattering at the Chinese Academy of Sciences and ANSTO, respectively.
“We have demonstrated that doping the structure with electrochemically inactive ions completely suppresses both transition metal charge ordering and sodium-ion ordering”
It was confirmed by neutron diffraction experiments on the Echidna instrument at OPAL which was used to study Na0.6(Cr0.6TiO4)O2, in a wide range of temperatures and sodium content.
Understanding all the conditions that led to sodium ordering was critical to design the material with desired properties.
“The approach we proposed opens up a way to design other Na+ disordered P-2 type high-rate materials with long cycle life.” said Avdeev.
Suggested Items
Groundbreaking Ceremony Marks the Beginning of a New Era for Newccess Industrial; The Construction of the MINGXIN Building
04/12/2024 | Newccess IndustrialOn a clear and sunny day in March, the groundbreaking ceremony for the MINGXIN Building took place in Shenzhen, China. This moment marked the official commencement of construction for a project that will reshape the semiconductor materials industry.
The Need for a Holistic Global Sustainability Standard
04/10/2024 | Michael Ford, Aegis SoftwareNo one can deny that the resources of our fragile planet are finite. The environment seems like a third party, subject to constant degradation. We’re acutely aware of the effects of pollution on our climate, and despite our “throw-away” culture, recycling and recovery of materials has remained relatively expensive, even as we use more energy just to survive.
iNEMI Publishes Four Roadmap Topics
04/04/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) announces the availability of the first roadmap topics in the new iNEMI Roadmap format. Printed circuit boards, sustainable electronics, smart manufacturing, and mmWave materials and test are now available online.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
Checking In With ICAPE Group
04/03/2024 | Nolan Johnson, I-Connect007ICAPE Group’s field application engineer Erik Pederson drills down on sustainability, supply chain resiliency, and what value engineering really looks like in this exclusive interview. Founded in 1999, European-based ICAPE Group provides 21 million printed circuit boards and over six million technical parts to manufacturers every month. With 30 PCB manufacturing partners globally and 50 partners providing a wide array of technical parts, ICAPE Group has operations in China, Taiwan, Thailand, South Korea, Vietnam, South Africa, Europe, Mexico, and the United States. The company also focuses on the value proposition for its customers.