The Flex-to-Fit Approach
June 4, 2015 | Tara Dunn, OMNI PCBEstimated reading time: 1 minute
The flex-to-fit concept reminds us that creativity and engineering go hand-in-hand. Imagine this scenario: As an engineer, you have been tasked with the challenge of adding sensors to the front spoiler lip of the new 2015 Porsche Cayman.
There is limited space available and the cavity is thin enough that running even a small wire bundle would be difficult. What do you do? Let’s take a look at the flex-to-fit concept.
When there is not ample space for a conventional approach, this process, which is the convergence of the mechanical world and the electronics world, results in the ability to design a flexible circuit along the contour of an existing, irregularlyshaped structure. By taking the mechanical part, extruding the surface and then conforming to that surface, a flex circuit can be created that will fit perfectly within the confines of a limited space or cavity. In a recent conversation with Mike Brown, of Interconnect Design Solutions, he helped to clarify this process, and we discussed several exciting applications. He also explained the benefits to the flexible circuit design process.
Most electronic systems require an enclosure to support a rigid PCB. Looking beyond the constraints of an enclosure and incorporating flexible circuits within the contours of other existing structures, opens up endless possibilities. In the example of the Porsche Cayman, imagine this solution: The valence of the front spoiler lip is mechanically digitized and recreated in a 3D MCAD model.
To read the full article, click here.
Editor's Note: This article originally appeared in the June 2015 issue of The PCB Magazine.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Magnalytix's Services and Trends in the Electronics Industry
05/10/2024 | Real Time with...IPC APEX EXPOMike Bixenman, president of Magnalytix, explains Magnalytix's services, including third-party validation, test boards, electrical testing, and comprehensive reports. He also discusses emerging trends such as power electronics and reliability. Standards and design improvements also form part of this conversation.
Podcast Review: On the Line with… Designing for Reality
05/09/2024 | Duane Benson, Positive Edge LLCAs a technologist, if I were forced to come up with just one recurring theme that I might call a professional “nemesis,” it would be the difference between theory and reality. A lot of technology we have at our disposal works well in theory but falls short when reality hits. That’s not the only reason I chose to listen to and review On the Line with… Designing for Reality, featuring a series of conversations with ASC Sunstone’s Matt Stevenson, but it certainly helped that the title caught my eye.
EMA Webinar: Next Generation MCAD/ECAD for SOLIDWORKS
05/09/2024 | EMA Design AutomationLearn how the MCAD and ECAD experts at Hawk Ridge and EMA can help you solve your MCAD/ECAD integration challenges with this unique collaboration environment.
Sondrel Awarded New Video Processor ASIC Design and Supply Contract
05/09/2024 | SondrelSondrel, a leading provider of ultra-complex custom chips for leading global technology brands, is pleased to announce that it has won a major ASIC design and supply contract for a next generation, video processing chip.
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.