Printed Electronics in Perspective
August 27, 2014 | Joe Fjelstad, Verdant ElectronicsEstimated reading time: 1 minute
Printed electronics have garnered a significant amount of press coverage over the last several years. What appears to have precipitated the explosion of interest in the middle of the last decade was a report that suggested that printed electronics would dominate electronic production by the mid-2020s with an annual market of over $300 billion. $300 billion is a big number and it not surprisingly captured a lot of attention. Since that announcement there has been a significant paring down of the market expectations to a number closer to one quarter the one projected earlier. It is, one can perhaps safely assume, an acknowledgement of the persistence of incumbent technologies. It seems clear to many knowledgeable observers that the potential of printed electronics was much more modest than early projections, but as Yogi Berra observed and has been often quoted, “Predictions are hard to make, especially about the future.”
The hyperbole surrounding the reports released in 2007 was met with some bemusement by those such as this writer, who having been first been involved in what would be called direct write printed electronics startup (using today’s broader definition) in 1990 had a different perception of the technology’s “newness.” Moreover, as one seeking to give credit where credit is due, it should be evident (if one puts in a bit of effort and does a little digging) that printed electronics is a technology that is arguably more than six decades old, thus predating my earlier company’s efforts by some 35 years.
The very first printed electronic circuits were called printed circuits because they were exactly that…printed, using conductive and resistive inks. Moreover, Xerox’s technology (then called the Haloid-Xerox Company) was applied to printing etch-resistant films for circuit production in the mid-1950s and more than 45 years ago, there was demonstration of a printed transistor in roll-to-roll fashion by Westinghouse.
Read the full article here.
Editor's Note: This article originally appeared in the August 2014 issue of SMT Magazine.
Suggested Items
ZESTRON Academy Launches 2024 Advanced Packaging & Power Electronics Webinar Series
05/01/2024 | ZESTRONZESTRON, the leading global provider of high-precision cleaning products, services, and training solutions in the electronics manufacturing and semiconductor industries, proudly announces the launch of its highly anticipated webinar series on Advanced Packaging & Power Electronics, a webinar series on the latest innovations, cleaning, and corrosion challenges.
NextFlex Convenes the Hybrid Electronics Community at Binghamton University
05/01/2024 | NextFlexBinghamton University hosted the NextFlex hybrid electronics community on April 18 for a day of expert presentations, breakout sessions on technology and manufacturing topics, and networking.
HQ NextPCB of HQ Electronics Debut on the International Stage for Electronics Manufacture at IPC APEX 2024
05/01/2024 | PRNewswireHQ NextPCB of HQ Electronics, a leading Chinese-based multilayer PCB manufacturer and assembly house showcased its industrial prowess on the international stage for the first time at the IPC APEX Expo 2024.
GPV’s Q1 2024 Interim Financial Report Shows Strong Navigation in Uncertain Times
05/01/2024 | GPVDanish-based GPV recorded an expected drop in sales to DKK 2.3 billion for the first quarter of 2024. The decline also affected the operating profit, which was DKK 155 million compared to DKK 179 million in the same quarter last year, although the EBITDA margin was maintained. In general, demand has been softer in 2024, but GPV continues to invest for the long-term and expects the trend to turn in the second half of 2024.
All-Inclusive: PRIDE Industries Helps Employees With Disabilities to Succeed
05/01/2024 | Sandy Gentry, IPCPRIDE Industries is the leading employer of people with disabilities and those with other barriers to employment in the United States, including veterans and former foster youth. The company offers job training, placement, on-the-job coaching, and skills development for independent living. It has held IPC membership since 2000. Read more about this unique business and its connection to the electronics manufacturing industry.