Northrop Grumman Successfully Integrates Multifunction RAPTR Sensor and Mini-CNI In Flight
December 20, 2022 | Northrop GrummanEstimated reading time: 1 minute
Northrop Grumman Corporation successfully completed a demonstration at Joint Base McGuire-Dix-Lakehurst to improve the survivability and lethality of the U.S. Army’s Future Vertical Lift (FVL) platforms, a key enabler for Joint All-Domain Command and Control (JADC2).
During the demonstration, Northrop Grumman simultaneously transmitted advanced sensor data and communications using the company’s Re Scalable Aperture for Precision Targeting Radar (RAPTR) and Mini-Communications, Navigation, Identification (Mini-CNI) systems on a UH-60 Black Hawk helicopter. The RAPTR and Mini-CNI performed bi-directional air-to-ground communications functions while performing air-to-air searching and tracking of targets. These capabilities support crewed-uncrewed teaming and long-range precision fires for the DoD.
“This flight test was a key step in demonstrating the ability to integrate multifunction sensors and advanced communications and networking systems into the FVL ecosystem that will provide warfighters with a number of new line-of-sight capabilities,” said Susan Bruce, vice president, advanced mission capabilities, Northrop Grumman. “These combined solutions will extend the operational reach of joint and coalition partners and will improve lethality, survivability and targeting against any threat for decision dominance in contested environments.”
The successful flight test advances Northrop Grumman’s journey to enable JADC2 using multi-domain solutions and decades of experience, delivering proven technologies used across high-profile DoD platforms. These solutions will enhance situational awareness; improve interoperability across platforms; adapt to emerging mission demands; and securely distribute critical information needed for mission success.
Both Northrop Grumman’s RAPTR and Mini-CNI offer a software-defined, modular open systems architecture approach that supports rapid integration with innovative third parties and is designed to provide flexibility for future growth while reducing cost, risk and time to deploy.
The demonstration is part of a series that showcases Northrop Grumman’s FVL capabilities.
Suggested Items
Real Time with... IPC APEX EXPO 2024: AI Implementation at Omron
04/18/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson and Omron Product Manager Nick Fieldhouse discuss the company's focus on AI implementation to enhance customer experience and results. They address programming challenges and how AI can help customers achieve better outcomes with less experience. Omron's AI is compatible with existing systems, facilitating easy upgrades.
Cadence Unveils Palladium Z3 and Protium X3 Systems
04/18/2024 | Cadence Design SystemsThe Palladium Z3 and Protium X3 systems offer increased capacity, and scale from job sizes of 16 million gates up to 48 billion gates, so the largest SoCs can be tested as a whole rather than just partial models, ensuring proper functionality and performance.
Australian Flow Batteries and The SCHMID Group Announce Groundbreaking Memorandum of Understanding
04/17/2024 | SCHMID GroupAustralian Flow Batteries Pty Ltd (AFB), a leader in innovative energy solutions and economical, safe, and reliable power storage, and SCHMID Energy Systems GmbH a company of the German SCHMID Group, a global technology leader with a rich history in delivering innovative solutions across multiple industries including Electronics, Renewables, and Energy Storage sectors, are thrilled to announce the signing of a Memorandum of Understanding (MoU)
Ansys Joins BAE Systems’ Mission Advantage Program to Advance Digital Engineering Across US Department of Defense
04/16/2024 | ANSYSAnsys announced it is working with BAE Systems, Inc., to accelerate the adoption of digital engineering and MBSE across the Department of Defense (DoD).
Designing Electronics for High Thermal Loads
04/16/2024 | Akber Roy, Rush PCB Inc.Developing proactive thermal management strategies is important in the early stages of the PCB design cycle to minimize costly redesign iterations. Here, I delve into key aspects of electronic design that hold particular relevance for managing heat in electronic systems. Each of these considerations plays a pivotal role in enhancing the reliability and performance of the overall system.