EMA Helps Ease Designers’ Supply Chain Woes

Reading time ( words)

Supply chain issues are continuing to cause disruptions in our industry, though lead times have dropped from astronomical to merely troublesome. In this interview, Chris Banton, EMA Design Automation’s director of marketing, explains how Cadence’s software has evolved as designers’ needs have changed in the past few turbulent years, including providing designers with component availability data early in the process. He also discusses how he works to get customers into the right tools for their requirements.

Andy Shaughnessy: Chris, how are you? Long time, no see.

Chris Banton: Good, Andy. It’s great to be here. It has been a while.

Shaughnessy: Why don’t you just give us a little update? What’s new at EMA?

Banton: It’s been an interesting couple years for everybody, but it’s great to be at the show. Things are starting to come back to normal, people are getting together again. But we’re still seeing a lot of the lingering effects of COVID and, particularly, what it did to the supply chain. That’s a topic that’s come up multiple times with customers at the show, and pretty much every discussion we have is how do they navigate that? How do they make sure they can get the parts they need?

We’ve had some of this technology for a while, and it’s been used, but we’re just seeing that accelerate where people can, as you said, get access to distributor data. We have a partnership with Silicon Expert where they can actually bring that data in, and a lot of the supply chain teams use Silicon Expert. So now the engineering team and the supply chain team are working off the same data set and they can start making decisions that are going to work down the line.

We had a customer tell us a few months ago their design cycle had shortened to four months from eight. Great, right? But the reason their cycle was shortening was that they couldn’t find the parts required to make their boards. Instead of waiting eight months to redesign their boards they’ve cut their design cycle in half, not because they wanted to, but because they couldn’t source parts. They were required to update their design to accommodate new parts and qualify those parts so they could keep building the product.

We’re seeing customers really changing the way they look at design, and the need to be able to put supply chain first. Is it available in DigiKey? That’s their first question. Then, is it functionally useful? It’s interesting to see that shift, but I think in the long run it’s going to make it better for companies to have this ability to find the best electrical part, and also the best source able part, the best priced part, this kind of holistic design thinking is going to make for a better product overall.


Shaughnessy: Designers are even talking about “supply chain-aware design.” I’ve heard designer call it design for supply chain (DSC), the next “design for.”

Banton: Yes, in the past we’d show an engineer, “Here are all the electrical statistics of a part. You can pick between these two. Which one do you pick?” And they’d pick the one that’s maybe a little bit better. Now you can show them, “Here’s the price and here’s availability. This one’s a cent more, but this one’s got a 52-week lead time. This one is three weeks.” It’s an easy choice for them to make as long as they have the information in front of them.

Shaughnessy: Part of your job is educating the customer.

Banton: Sure. Some of this is just trying to help people with their flows, how do we help our customers collaborate better, more efficiently? Cadence has a technology called Symphony that allows for real-time co-design of the PCB so people can get in there, and work on different areas of the board collaboratively. They can work together remotely replacing what used to be kind of stand-over-the-back-of-your-cubemate’s-desk is now natively in the CAD software. That’s one of the things that we’re going to cover in an upcoming webinar. Now you can bring a little simulation into the process. You can do placement and routing collaboratively, you can run simulations on your board, you can work with an SI expert or your EE to see what’s going on and make design decisions all on the same data set. It’s no longer back and forth email; it all happens in real time.

Shaughnessy: Advanced packaging has become a big issue now, with IPC devoting a whole show to this topic. Is this something your consumers or your customers are asking for?


Banton: I think it’s more of a pull from the customers trying to figure out, "How do we keep shrinking this?" And it’s not always cost-effective or possible for you to keep shrinking the die or roll another SoC where right now you can start having this kind of chiplet idea where you can still reduce the size. There are a lot of security benefits for the military to do this in a package. We’re seeing more requests because the demands of shorter, faster, lower power aren’t going away. Some of the physics and chip scaling are, at least for now, catching up to us. There are still ways to meet what you need from a product perspective. Definitely an exciting space to watch

Shaughnessy: Well, thanks for talking to me today. Nice talking with you in person.

Banton: Thank you. 




Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

01/20/2023 | Andy Shaughnessy, Design007 Magazine
We’re in the middle of show season, and it certainly “shows.” Thank you very much. I’m here all week. Don’t forget to tip your wait staff. This week, we published a variety of articles, columns, and news items, and much of it centered on trade shows. Technical Editor Dan Feinberg brings us a report from CES 2023. IPC announced the winners of the Best Technical Paper awards for IPC APEX EXPO 2023. And we have an interview with Altium’s Rea Callender about the company’s educational efforts at APEX and around the globe.

Altium Focuses on Design Education

01/16/2023 | I-Connect007 Editorial Team
Altium keeps its eyes on the designers of the future. The company has been working with colleges and universities for years, providing free seats of Altium Designer for the next generation of PCB designers and design engineers. At IPC APEX EXPO 2023, Altium will be providing software for the finalists in the IPC Design Competition just as it did last year. They offer a variety of other educational programs as well, including Upverter classes and a design competition that aims to address environmental change. Here, Rea Callender, Altium’s VP of education, discusses its educational programs and plans for the week of the show.

The Battle of the Boards

01/12/2023 | Patrick Crawford, IPC
Last year, IPC held its first-ever design competition at IPC APEX EXPO in San Diego. PCB designers from around the world competed in a series of heats during the months before the show, culminating in a showdown on the show floor between the top three finalists. Rafal Przeslawski, now with AMD, took home the top prize last year. This year, the competition is back for its sophomore year. I asked Patrick Crawford, manager of design standards and related programs for IPC, to “layout” the details on the design contest, including lessons learned in 2022 and what’s new for the 2023 competition.

Copyright © 2023 I-Connect007 | IPC Publishing Group Inc. All rights reserved.