Rogers Corporation Highlights Advanced Materials at Defense TechConnect Summit & Expo


Reading time ( words)

Rogers Corporation will exhibit its advanced material solutions for Aerospace & Defense markets at the Defense TechConnect Summit & Expo 2022, Booth # 513, at the Gaylord National Hotel & Convention Center, in National Harbor, MD, Sept. 27-28, 2022.

Learn more about Rogers’ multilayer copper clad laminate solutions and formable/shaped dielectric systems designed to meet smaller size, weight, and power (SWaP) requirements in complex electronic assemblies; advanced magneto dielectric systems (MAGTREX® laminates) for impressive miniaturization of antennas and other electromagnetic (EM) assemblies; and novel dielectric composite materials for use in 3D additive manufacturing processes that can  expand the performance of antennas and sensor systems.  Rogers develops material solutions for enhanced signal integrity (SI), improved EM performance and thermal management of critical electronic applications.

Rogers Corporation continues to develop material solutions for the changing needs of electronic industries and will bring an experienced team of technologists to Defense TechConnect Innovation Summit & Expo to help present and enable prospective partners to meet and exceed their system requirements.  The popular expo is a global forum for Rogers to showcase their technologies, materials, engineering capabilities, and advanced solutions and invite in-booth discussions concerning the challenges posed by current and emerging applications, and how Rogers’ unique materials solutions can help overcome these challenges.

“Rogers’ commitment to the aerospace and defense electronics industry transcends our traditional laminate materials.  We are pleased to introduce to the innovation community the advanced material solutions and capabilities Rogers can employ to solve complex challenges faced by our partners.  I hope to see many of you at the show.” – John Ekis, Market Segment Director.

Share




Suggested Items

EIPC Technical Snapshot: Novel Laser-based Manufacturing Processes in Automotive Electronics

09/22/2022 | Pete Starkey, I-Connect007
“Summer is over, now it's back to work!” This was the opening line of the invitation to the 18th EIPC Technical Snapshot webinar, Sept. 14, following the theme of advances in automotive electronics technology, introduced and moderated by EIPC President Alun Morgan. The first presentation, entitled "The fully printed smart component—combining additive manufacturing and sensor printing," came from Jonas Mertin, a thin-film processing specialist at the Fraunhofer Institute for Laser Technology.

Plating on Silver: What’s Old is New Again

07/07/2022 | Denis Jacques, Technic Inc.
About three decades ago, immersion silver, a nitrate-based process, gained a lot of market share in the world of PCB final finishes. More economical than ENIG, flat, solderable, and conductive, it had everything going for it—everything but corrosion resistance in a harsh environment, that is. Champagne voids were also an issue, along with line reduction. But the worst drawback, the characteristic that made the part short over time, was creep corrosion. A build-up of copper sulfide salt that grows in contact with a sulfur-rich environment, heat, and moisture resulted in failures in the field. This was enough to scar the process for good.

EIPC Summer Conference 2022: Day 2 Review

06/29/2022 | Pete Starkey, I-Connect007
Örebro, Sweden on June 15 brought a bright and early start to Day 2 of the EIPC Summer Conference for those who had enjoyed the previous evening’s networking dinner, but had resisted the temptation to over-indulge or to carry on their long-awaited catch-up conversations with old friends into the small hours. All but a few were in their seats for 9 a.m., awake and attentive for Session 4 of the conference, on the theme of new process technologies, moderated by Martyn Gaudion, CEO of Polar Instruments.



Copyright © 2022 I-Connect007. All rights reserved.