Excerpt Chapter 5: 'The Printed Circuit Designer’s Guide to... Thermal Management with Insulated Metal Substrates, Vol. 2'


Reading time ( words)

Chapter 5: Boosting Thermal Performance with Multilayer IMS
In The Printed Circuit Designer’s Guide to... Thermal Management with Insulated Metal Substrates (Vol. 1), the authors briefly discussed the issues around combining multiple layers of copper foil, dielectric, and substrate materials and the design opportunities given by the latest generation of thermally conductive thin cores and prepregs.

The latest thermally conductive materials, prepregs, and cores allow designers to reconsider the thermal management approach. They can offer a simple and ready-to-use solution to address thermal issues on existing multilayer boards.

Through necessity, the industry has already come up with many solutions over the years, such as thermal vias, thermal coins, and inserts. All these existing solutions require either the use of thick copper foil and/or the use of heavy copper coins, thus leading to an inevitable inflation in cost and weight. We can now analyze alternative designs made possible by the arrival of multilayered IMS. The following application examples illustrate the concept and the main benefits of multilayered IMS.

ventec_book_Fig5-1.jpg
Figure 5.1: Single-sided single layer.

The PCB design with insulated metal substrates is by no means limited to single-sided and single-layered circuits (Figure 5.1), although these are predominantly the types of circuits used in LED-lighting and power electronics applications.

There are several versatile ways to take advantage of IMS’s enhanced thermal properties in situations that demand various other attributes such as physical formability or compliance, an intricate shape or small dimensions, or a complex circuit layout that would be fulfilled with a multilayered PCB if it weren’t for the thermal issues.

If a formable grade of laminate (such as, for example, aluminum 5052 with a thin, non-reinforced dielectric) is specified, a single-sided circuit can be post-formed into three-dimensional shapes. This may help to design a circuit board that must fit inside a small or unusually shaped enclosure, or to cram more electronic circuitry within a limited space, or maybe ease assembly of a product if there is only minimal access to install electronic circuit boards. The aluminum layer is machined to reduce its thickness in the bend area.

ventec_book_Fig5-2.jpg
Figure 5.2: Single-sided double layer.

Also, it is possible to build insulated metal substrates into multilayered IMS structures (Figure 5.2) with thermally conductive laminates and prepregs using plated-through holes for Z-axis interconnection.

In situations where the metal base is not an option, but the component temperature needs to be reduced, an alternative construction may be necessary; the thermal conductive cores and prepreg may be combined to create the entire board or may be used in a hybrid construction combining conventional FR-4 and thermal conductive cores or prepreg.

To continue reading this chapter, download your copy of this book from the I-007eBooks library today!

Share




Suggested Items

Understanding MIL-PRF-31032, Part 6

12/08/2020 | Anaya Vardya, American Standard Circuits
Concluding this six-part discussion on understanding the military printed circuit board performance standard MIL-PRF-31032, Anaya Vardya the remaining procedure required to address the unique requirements of the military.

Additive Electronics TechXchange: NSWC Crane and Lockheed Martin Presentations

10/27/2020 | Happy Holden, I-Connect007
The Additive Electronics TechXchange this year was a virtual event. Happy Holden covers two presentations, including “Very High-Density Investigation Project” by Steve Vetter of the NSWC Crane Naval Facility and "Electronics Additive Manufacturing for Defense and Space" by Kourtney Wright, Ph.D., of Lockheed Martin Advanced Technology Center.

Understanding MIL-PRF-31032, Part 4

10/20/2020 | Anaya Vardya, American Standard Circuits
Continuing with Part 4 of the discussion on understanding the military PCB performance standard MIL-PRF-31032, Anaya Vardya explains how the next step in the process is to create four new procedures to address the unique requirements of the military.



Copyright © 2022 I-Connect007 | IPC Publishing Group Inc. All rights reserved.