BAE Systems to Bring Next-Generation Electric Drive System to Heavy-Duty Industrial Vehicle Market
May 10, 2022 | BAE SystemsEstimated reading time: 1 minute
BAE Systems, a leader in electric propulsion, will bring its next-generation power and propulsion technology to the heavy-duty industrial vehicle market. The company’s electric drive system provides a revolutionary design which will help industrial vehicle original equipment manufacturers (OEMs) get their electric vehicles (EVs) to market faster and at a lower installed cost.
BAE Systems has over 15,000 power and propulsion systems in electrified commercial vehicles across the globe, and those systems have logged four billion on-road miles.
“We are providing an all-inclusive solution to bring the industrial vehicle market one step closer to a zero emission future,” said Steve Trichka, vice president and general manager of Power and Propulsion Solutions at BAE Systems. “Our next-generation components are the Swiss Army Knife of power electronics, delivering multifunctional capabilities in a compact and flexible design. This flexibility makes it easier for OEMs to cover multiple platforms, including traditional diesel and purpose built EVs.”
BAE Systems’ next-generation system for the heavy-duty industrial vehicle market builds on the company’s more than 25 years of experience in low and zero emission EV solutions for the transit bus and marine industries. The system uses fewer components and increases electrical efficiency. Its Modular Accessory Power System (MAPS) and Modular Power Control System (MPCS) also allow for scalable, customized solutions to provide the core power for a range of applications, from school buses and mining vehicles to sanitation and yard trucks.
Using a modular design, BAE Systems’ power electronics technology will provide both power and propulsion for battery electric, fuel cell, and electric-hybrid vehicles. In addition to MAPS and MPCS, the next-generation system is available with central motor, electric axle, battery and fuel cell solutions.
BAE Systems has a deep understanding of systems engineering, a revolutionary design for propulsion and accessory power, proven integration expertise, and aftermarket support to give manufacturers a reliable solution and faster path to market, at a lower installation cost.
BAE Systems develops and services its electric propulsion technology at its facilities in Endicott, N.Y., and Rochester, U.K.
Suggested Items
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Ansys, TSMC Enable a Multiphysics Platform for Optics and Photonics, Addressing Needs of AI, HPC Silicon Systems
04/25/2024 | PRNewswireAnsys announced a collaboration with TSMC on multiphysics software for TSMC's Compact Universal Photonic Engines (COUPE). COUPE is a cutting-edge Silicon Photonics (SiPh) integration system and Co-Packaged Optics platform that mitigates coupling loss while significantly accelerating chip-to-chip and machine-to-machine communication.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.