Raytheon Intelligence & Space to Begin Next Generation Jammer Mid-Band Production
July 12, 2021 | Raytheon TechnologiesEstimated reading time: 1 minute
Raytheon Intelligence & Space, a Raytheon Technologies business, has been awarded a $171.6 million contract for Low-Rate Initial Production Lot I, or LRIP I, of the U.S. Navy's Next Generation Jammer Mid-Band. The award advances the program from the development stage into production and deployment.
NGJ-MB is the Navy's advanced electronic attack system that offensively denies, disrupts and degrades enemy technology, including air-defense systems and communications. NGJ-MB uses the latest digital, software-based and Active Electronically Scanned Array technologies. This allows operators to non-kinetically attack significantly more targets and at greater distances.
"With its power and ability to jam multiple radars simultaneously, NGJ-MB will fundamentally change the way the Navy conducts airborne electronic attack," said Annabel Flores, vice president of Electronic Warfare Systems for RI&S. "NGJ-MB will increase the survivability and lethality of fourth-and fifth-generation fighters, making naval aviation that much more effective."
The award follows last week's Milestone C decision, advancing the program into the production and deployment phase. NGJ-MB has completed more than 145 hours of developmental flight-testing using mission systems and aeromechanical systems. The program has also completed over 3,100 hours of anechoic chamber and lab testing at Naval Air Station Patuxent River, Maryland, and Naval Air Station Point Mugu, California. Chamber tests evaluated the system's performance both on and off the EA-18G Growler aircraft, in addition to jamming techniques and reliability testing.
Suggested Items
Emerald Technologies Acquires Optimum
05/13/2024 | Emerald TechnologiesEmerald Technologies announced its acquisition of Optimum Design Associates, Inc. (Optimum), a leading electronic design and engineering services company. Terms were not disclosed.
IDTechEx Explores Printed Electronics in Electrified and Autonomous Mobility
05/13/2024 | IDTechExElectrification, autonomy, and vehicle ownership saturation are causing a technological revolution in the automotive sector. These automotive meta-trends are driving drastic changes in electronic component requirements and present a high-volume opportunity for printed electronics to capitalize on.
MKS’ Atotech to Participate in ECTC
05/10/2024 | MKS’ AtotechAt this year’s 74th IEEE Electronic Components and Technology Conference (ECTC), MKS’ Atotech will present and demonstrate its latest product and service innovations.
IDTechEx Report: Illuminating the Future of Lidar in Automotive
05/09/2024 | PRNewswireIn the rapidly evolving landscape of Advanced Driver-Assistance Systems (ADAS) and autonomous driving, sensor technologies have emerged as a pivotal force driving innovations in the automotive industry.
MKS Instruments Reports Q1 2024 Financial Results
05/09/2024 | MKS Instruments, Inc.MKS Instruments, Inc., a global provider of enabling technologies that transform our world, reported first quarter 2024 financial results.