AT&S to Build New Production Site for IC Substrates in Southeast Asia
June 1, 2021 | AT&SEstimated reading time: 2 minutes
AT&S AG, one of the leading manufacturers of high-end printed circuit boards and IC substrates, plans to build a new production site for IC substrates in Southeast Asia, subject to the approval of the Supervisory Board.
The planned investment will total up to € 1.7 billion for the construction of a new production complex for high-end substrates between 2021 and 2026. This would be the largest investment to date in the history of AT&S.
The project is based on, and subject to, a planned collaboration with two leading manufacturers of high-performance-computing semiconductors, with whom long-term contracts are to be concluded. These contracts are expected to be signed shortly.
About half of the investment volume is to be provided by the customers’ contributions to financing. The balance sheet presentation of these contributions is yet to be clarified. In any case, a capital increase by issuing new shares will not be required to finance the project.
The plan is to produce ABF substrates for high-performance processors at the location in Southeast Asia. These processors are applied in areas such as high-performance computers, data centres, gaming, 5G, automotive and AI. The planned production site will total approximately 200,000 m² in size. Construction is scheduled to start in the second half of 2021, and high volume production at the end of 2024. The currently planned capacity can generate additional revenue potential of up to € 1 billion p.a. when fully utilised. The Management Board emphasises the importance of this project. It contributes significantly to the future diversification of the customer portfolio, broadening the regional footprint and the company’s positioning in the rapidly growing market for ABF substrates.
In case of this investment and given the development in the other business segments as part of the “More than AT&S” strategy, the Management Board expects a business development with revenue of approximately € 3 billion in the financial year 2025/26 (2023/24: more than € 2 billion). This would correspond to a compound annual growth rate (CAGR) of approximately 20% through to 2025/26. Due to the increased focus on high-end applications in all business segments, an EBITDA margin in the range of 27 to 32% can be achieved (2023/24: 25 to 30%). Depending on the balance sheet presentation, the net debt-to-EBITDA ratio could temporarily exceed the medium-term target of <3 and the equity ratio could fall short of the internal target of >30% during the project phase until the capacities are utilised. The Group’s medium-term ROCE target would continue to be >12%; this target should be achieved with the ramp-up of production.
Suggested Items
TTM Celebrates the Grand Opening of Its First Manufacturing Facility in Penang
04/25/2024 | TTM Technologies, Inc.TTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (PCBs), officially opened its first manufacturing plant in Penang, Malaysia with an investment of USD200 million (approximately RM958 million).
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
IPC Design Competition Champion Crowned at IPC APEX EXPO 2024
04/24/2024 | IPCAt IPC APEX EXPO 2024 in Anaheim, California, five competitors squared off to determine who was the best of the best at PCB design.
Real Time with... IPC APEX EXPO 2024: all4-PCB, A Premier Solution Provider for the PCB Industry
04/22/2024 | Real Time with...IPC APEX EXPOIn the PCB industry, all4-PCB, is a top-tier equipment supplier and process solution provider. Ralph Jacobo highlights the active market and the demand for high-quality equipment, discusses their existing customers, investment in advanced substrates, and smaller board shops.