With Flex, Sometimes You Gotta Break the Rules
April 5, 2021 | Tony Plemel, Flexible Circuit TechnologiesEstimated reading time: 2 minutes
Sometimes in life, we need to break the rules. For example, in junior high I had a curfew but to have my first kiss, I had to break curfew. I got grounded, but it was worth it!
My last article was about reasons to follow IPC design and inspection rules. This time, we are discussing instances where, due to complex requirements, customers are not always able to follow the rules. I will also discuss some design options that will hopefully keep you from “getting grounded.”
Here are a few examples of when a customer would need to stretch the rules and supersede IPC-2223 and IPC-6013.
1. Insufficient real estate for IPC-suggested blind or buried via hole sizes.
2. Limited space requires bending a flexible circuit tighter than the IPC-2223 bend rules.
3. Insufficient real estate requires placing vias closer to the transition rigid-to-flex areas on a rigid-flex circuit.
4. Requiring tighter than normal tolerances.
Now, let’s go through these in greater detail.
1. Smaller than IPC-suggested blind or buried vias. As packages get smaller and real estate is at a premium, customers sometimes go smaller than the recommended ratio of 1:1 for blind or buried vias. Due to reliability concerns, the smallest recommended microvia is 100 µm (0.004”). If the design will not support 100 µm vias, it may be acceptable to drop to 75 µm if the 1:1 aspect ratio is strictly followed. So, the 75 µm via hole can only go 75 µm deep, or less. Be sure your flex supplier runs thermal shock testing on all plated vias and through-holes (especially blind vias under 100 µm) to ensure that they are reliable.
2. Bending a flexible circuit tighter than the IPC-2223 bend rules. A recent customer had a situation where a flex arm on a 2-layer flex circuit did not have room for a radius of 10:1 as recommended by IPC-2223. The circuit had to bend back 180 degrees upon itself. We recommended a forming fixture to create a repeatable bend. Within this fixture, a clamp was placed to ensure that once a droplet of super glue was added, the circuit bend was stabilized. This allowed a repeatable and reliable 2:1 bend ratio. It is critical on a reduced bend ratio application that once the circuit is formed, it is immediately constrained and not allowed to relax. Once all devices were in place and a few bends were made and glued, cross-sections were taken to ensure there was no cracking or elongation of the traces, or delamination in the coverlay. Since then, hundreds of thousands of circuits have been deployed in the field with zero quality issues. When the available room and the install scenario were considered, the solution we came up with was a success.
To read this entire article, which appeared in the March 2021 issue of Design007 Magazine, click here.
Suggested Items
PCBflow Helps Designers Choose Best Manufacturer for the Job
03/28/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with a few technologists who have first-hand experience with PCBflow: Susan Kayesar, technical product manager with Siemens; Evgeny Makhline, CTO of Nistec, a CEM based in Israel; and Peter Tranitz, senior director of technology solutions and leader of the IPC Design Initiative. They explain how PCBflow functions, from the designer’s and manufacturer’s viewpoint, and how this database helps break down the wall between these stakeholders.
ASMPT to Exhibit Smart Manufacturing at IPC APEX EXPO 2024
03/27/2024 | ASMPTWith its innovative, data-driven Intelligent Factory concept and a comprehensive hardware and software portfolio around SMT production, market and innovation leader ASMPT will be a major presence at the IPC APEX EXPO 2024, the industry’s main event in California.
Mycronic to Showcase More Versatile, High-productivity Assembly Solutions at IPC APEX EXPO 2024
03/27/2024 | MycronicMycronic, the leading Sweden-based electronics assembly solutions provider, will continue to respond to growing customer demand for high-flexibility, high-productivity solutions for zero-defect PCB assembly at IPC APEX EXPO 2024 in Anaheim, CA on April 9 - 11.
TRI Launches New Advanced Packaging 3D CT AXI Solution
03/26/2024 | TRITest Research, Inc. (TRI) proudly announces the launch of the SEMI 3D CT AXI solution, TR7600F3D SII Plus, marking a paradigm shift in precision and reliability for high-reliability electronics manufacturing, such as the Advanced Packaging Industry.
Blackfox Ready for IPC APEX EXPO 2024
03/26/2024 | Andy Shaughnessy, I-Connect007Blackfox Training Institute offers IPC-certified training for a myriad of PCB assembly techniques and standard certifications. With many technologists beginning to eye retirement, this training is at a premium. I recently spoke with Jamie Noland, director of training and education for Blackfox, about the company’s latest educational efforts, and his plans for the upcoming IPC APEX EXPO, where Blackfox will be exhibiting.