Dr. Nathan Blattau, R&D Fellow at Ansys, to Present at SMTA Capital Chapter Meeting


Reading time ( words)

The SMTA Officer team is excited to provide our members with a new webinar by Dr. Nathan Blattau, R&D Fellow at Ansys, Inc., on “Next Generation Lead Free Solders for High Reliability and SMT Yield improvement in Client Computing Systems.” The webinar will be on Tuesday, April 6th at 12:00 PM EST and will discuss the evolution of lead free (Pb-free) solder, from tin-silver-copper (SAC) system with silver content of 3.0 and 4.0 to low SAC solders and the emergence of high reliability Pb-free solder. It will cover the reasons and the driving forces of industries implementing this change.

The solder composition has evolved further recently to fulfill high reliability requirements of certain sectors such as automotive, aerospace, and military which are preparing to utilize lead free solder technology. This kind of high reliability solder involves additional microalloying of tin (Sn)-based solder in making it to be more robust. This presentation will discuss 2nd and 3rd generations solders used to enhance the Pb-free solder strength and the reliability associated with each system.

Dr. Nathan Blattau, Distinguished Engineer at Ansys, has been involved in the simulation and reliability of electronic equipment for over twenty years.  Prior to joining Ansys, Dr. Blattau was the Vice President and Chief Scientist of DfR Solutions.  He holds two patents and has authored over 20 papers and has presented on a wide variety of reliability issues within the electronics industry.  His specialties include best practices in design for reliability, robustness of Pb-free, failure analysis, accelerated test plan development, nonlinear finite element analysis, and solder joint reliability. Dr. Blattau holds a Ph.D. in Mechanical Engineering, an M.S. in Mechanical Engineering, and a B.S. in Civil Engineering from the University of Maryland.

This webinar is FREE for SMTA members and $15 for non-members.

To RSVP, please click here.

About SMTA:  30 Years Developing Solutions in Electronics Assembly

The SMTA membership is an international network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies, including microsystems, emerging technologies, and related business operations.  For more information or to join, please visit www.smta.org.

Share

Print


Suggested Items

Excerpt—The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 2

04/15/2021 | Brent Fischthal, Koh Young America
A limitation of many 3D optical inspection systems is the cycle time typically associated with processing millions of pixels to reconstruct a full 3D image using data captured from multiple channels. There should not be a compromise between 3D inspection and throughput. A successful inspection deployment should provide oversight for the process, not compromise, interrupt or slow that process.

Excerpt: The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 1

04/08/2021 | Brent Fischthal, Koh Young America
Today, optical inspection systems are the preferred solution for in-line quality control in the SMT industry. Systems such as solder paste inspection (SPI) or automated optical inspection (AOI) systems for pre- and post-reflow are almost standard in every production facility.

Real Time With… Premium Sponsors Share ‘Top 5 Things You Need to Know’

03/05/2021 | I-Connect007
As part of I-Connect007’s coverage of the IPC APEX EXPO 2021, four premium sponsors share their knowledge and expertise in the following categories.



Copyright © 2021 I-Connect007. All rights reserved.