Tech 2 Tech: KYZEN’s Short Technical Sessions a Big Hit


Reading time ( words)

Nolan Johnson gets an update from Tom Forsythe on KYZEN’s Tech 2 Tech sessions. These brief 15-minute sessions were set up during the pandemic by KYZEN for customers, prospects, and new engineers around cleaning, and have since found traction with their manufacturers, reps and distributors.

Nolan Johnson: Tom, you and I were just talking about how IPC APEX EXPO has gone virtual for 2021. You’ve already made a similar jump with the KYZEN Tech 2 Tech sessions that you started last year.

Tom Forsythe: It was certainly part of the equation. At KYZEN, our team is very technical. Our salespeople are more consultants than they are salespeople, to be honest. Of course, the reason APEX has been delayed is because COVID-19 is still rather rampant. So, close personal contact with other than blood relatives is pretty limited these days. We thought, why don’t we look at our expertise, and break it up into very digestible pieces that wouldn’t really take up everyone’s day. With everyone being remote, living on Teams or Zoom or whatever it may be, and having these big hour-long blocks of time where you can’t squeeze anything else in, we said, “You know what? Let’s target this at 15 minutes.” People can slide this session in between meetings. They can get a cup of coffee and come to our meeting. In fact, we intentionally start a bit past a quarter after the hour.

We sat down and rapidly came up with a long list of potential topics. One of our challenges is that we tend to be “big picture” speakers. Turns out, going to the short form of 10 or 15 minutes was a challenge and a learning experience for pretty much everybody on our team. I decided I would be the first “victim,” and that really helped us focus and boil things down to that executive summary sort of thing. We looked at the key elements of each specific topic. As we did, we realized that we had a broader audience than we thought. We started out thinking, “All right, this is for customers, prospects, and new engineers to get assigned to cleaning, and they’ve never really worked in it before.” But we discovered that it helped our manufacturers, reps, and distributors. They have very broad product offerings, and they’re always looking to learn and pick up some expertise.

We got participation from all over the world. The guys from Asia and Europe see this as a terrific opportunity to pick up some facts. Existing customers tuned in to ask follow-up questions on current challenges, because we’re not out there visiting people. We found we had this broad audience, and then a funny thing happened: We came up with this long list of topics. Well, it turns out we all thought the pandemic would be over in a couple of weeks, right? In March, this all started out as a two-week problem. That turned out not to be true. While it’s been extended, we’ve kept the ball rolling, and now we’ve developed this library of, I think, two dozen or more.

Now it’s a case of, “Gee, now we’re working on the website and other things, so how do we make that available to folks on demand?” We found we’re now covering all these building blocks around cleaning, and even in electronics, we talk about board cleaning, stencil cleaning, and we get into some advanced packaging topics. There’s a broad range out there of what people do. The water-soluble materials versus the people cleaning the old rosins–not that there’s too much of the rosin left, but there’s a little bit of it–and lots and lots of no-clean. There are all these different nuances. We’re getting even more excited about that because if you’re hiring new people, whether it’s in the lab or marketing, they can sit down and get some basic education on key fundamentals, almost like a verbal glossary.

The electronics industry is famous for its jargon. The military doesn’t have anything on us for acronyms. When you hire new people--whether it’s us, the cleaning people, or the solder people, and even our customers—and give them a project, where do they start? This is a resource for them which, from a utility function, has greatly expanded and gotten us even more jazzed. It has turned out to be a fun thing.

Johnson: It sounds like it. You’ve got four audiences you’re reaching all at the same time: your prospective customers, current customers, your distribution chain, and your staff.

Forsythe: Absolutely. In my world, the solder’s just dirt that needs to be cleaned. My compadres in solder, they laugh too, but it’s honestly true. They hire new people too. And well, here’s an open resource that you can get a little insight on. The more we think about it, the more we smile, and we just keep moving ahead and expanding the topics. We sit down every month or so and lay out the next two or three months. We do the sessions every other week because, frankly, there’s a lot of work to get them ready.

Johnson: 10 minutes is not easy.

Forsythe: No. Also, we decided to really go to our bench. KYZEN’s got a very broad and deep bench between our field services folks (who are all technical), and our R&D folks, who are technical by definition. We have a big crowd of people. We’re cycling them all through. This is shining a light on the depth of expertise that we’ve got throughout the organization. It’s not just three or four people who know this stuff.

Johnson: There’s something about putting more faces from your company out there with the customers to make a deeper connection. It tends to humanize your company, humanize your product, and make the community tighter.

Forsythe: Absolutely. That’s very core to our approach. For our market branding, we had some studies done a couple of years ago and we came up with this notion of where science and care converge. We liked that it wasn’t a clever marketing brain transplant; it was a very clear mirror that spoke to who we were. And this whole idea of being involved with our customers: If they’re having a bad day, we want to be standing next to them having that bad day, helping to make it go away.

If our expertise can be part of that solution, we very much want to be there and do that. We’d like to do it in person. We don’t like to send emails and letters. We like to show up and roll up our sleeves, and that’s our nature. From that perspective, the pandemic has been awful because we’ve been prevented from doing that for mostly good reasons, but it doesn’t mean the outcome isn’t still very contrary to our preferred modus operandi. This whole approach is very much in sync with our normal activities of being highly engaged onsite with customers, but we’re trying to figure out some ways to do it digitally. This was one of those ideas.

Johnson: It sounds to me like this is going to carry into 2021 with a lot of momentum.

Forsythe: We believe so. We’ve got a load of topics lined up and we’ve got people in line. In fact, in our live productions, we go through one or two training cycles with the speaker. We get them familiar with the tools, much like we did today with this Teams call. But it’s been very good, the admin side has really fallen into place and the organization has really rallied to it and done a great job on some of these topics in helping explain those terms that are thrown around that a lot of people have heard, but maybe everybody doesn’t understand them or doesn’t understand how they connect.

That’s what we’re focused on, those tight, 10-minute windows, because you don’t really have time to jabber along when you’re trying to convey a concise, complete topic in that brief 10- or 12-minute window with a few minutes for questions afterwards. It’s been a very positive experience because it’s helped everyone hone in, refine it, and also generate some additional topics. I’ve got this great 30-minute talk, but I’ve only got 10 minutes, so, maybe I could segment this into two or three things that we stretch out over a length of time. It’s really been a positive thing, and the feedback we’re getting from the attendees has been very positive.

Johnson: What sort of feedback are you getting?

Share

Print


Suggested Items

Real Time With… Premium Sponsors Share ‘Top 5 Things You Need to Know’

03/05/2021 | I-Connect007
As part of I-Connect007’s coverage of the IPC APEX EXPO 2021, four premium sponsors share their knowledge and expertise in the following categories.

Blackfox Adapts, Improves Through Pandemic

03/03/2021 | Andy Shaughnessy, I-Connect007
The pandemic disrupted businesses around the globe, but many have learned to adapt and even improve their existing processes. Andy Shaughnessy recently spoke with Jamie Noland of Blackfox Training Institute about some of the lessons learned from COVID-19 and how the company has adapted and developed new ways of training its students.

Super Dry: Increasing Component Storage Needs

03/03/2021 | Nolan Johnson, I-Connect007
Nolan Johnson speaks with Super Dry’s Richard Heimsch about how the need for dry storage solutions has increased throughout the pandemic, including further demands for traceability and automation capabilities.



Copyright © 2021 I-Connect007. All rights reserved.