I-Connect007 Editor's Choice: Five Must-Reads for the Week


Reading time ( words)

This week, we’ve covered a variety of bases in our newsletters and websites. In my top five picks, we have news about columnist Tara Dunn moving to Averatek to work with their A-SAP additive processes, and an interview with Audrey Sim regarding the “hybrid” model adopted by the HKPCA for its upcoming Electronic Circuits World Convention.

We also have a compilation of the questions that readers have asked Joe Fjelstad and news about DownStream Technologies adding support for flex, rigid-flex, and embedded component designs. Finally, we share a review of some of KYZEN’s new training sessions on cleaning electronic assemblies—virtual courses that pack a lot of information into 15-minute snapshots. Knowing how tight everyone’s schedules are now, 15-minute events might be the ticket.

Just Ask Joe Fjelstad: The Exclusive Compilation
Published November 19

Our “Just Ask” series continues to be popular with readers from across the electronics development spectrum, and columnist Joe Fjelstad was happy to answer your queries about topics new and old. There’s a thirst for knowledge in our industry, and we’ll keep bringing you the experts who have the information you need.

HKPCA’s Audrey Sim Details Upcoming Electronic Circuits World Convention
Published November 18

After covering a variety of virtual trade shows this fall, I can’t say I’m shocked to see the Hong Kong Printed Circuit Association holding their 2020 Electronic Circuits World Convention as both a virtual and physical show. In this interview, Audrey Sim of HKPCA details this hybrid event, which will be virtual for all three days, while the last day’s forum will also be a live event. This might be a great model for trade shows as we move forward. The show takes place from November 30 through December 2.

New DownStream Software Supports Flex, Rigid-Flex, and Embedded Component Designs
Published November 17

Flex and rigid-flex keep marching on, making inroads into many of our military, aerospace, and household devices. Now, DownStream Technologies has added support for flex, rigid-flex, and embedded component designs to their CAM350, DFMStream, and BluePrint-PCB flows. DownStream will now support importation and visualization of flex, rigid-flex, and embedded designs in 2D and 3D.

High-Tech, High-Value Cleaning Answers Made Easy With KYZEN’s Tech-2-Tech
Published November 19

This summer, KYZEN introduced its Tech-2-Tech training initiative, a series of 15-minute virtual sessions focused on cleaning electronic assemblies. In this review, Technical Editor Pete Starkey discusses his takeaways from a number of these training sessions, including “the five forces of cleaning” and how surprised he was to learn so much in a quarter of an hour. One upcoming holiday session will cover “Smart pH Employment in Electronic Cleaning: What Is the pH of Eggnog?” 

Tara Dunn Transitions to New Role at Averatek
Published November 19

Tara Dunn recently joined Averatek, the company that created the A-SAP high-density additive manufacturing process. In this interview with Editors Michelle Te and Nolan Johnson, Tara discusses her new role as vice president of marketing and development at Averatek and why she believes that the additive process represents the future of high-density PCB manufacturing.

Share




Suggested Items

Michael Carano: A Focus on Process Control, Part 2

09/28/2022 | I-Connect007 Editorial Team
In this second half of our conversation, Michael Carano discusses some of the metrics that fabricators need to consider before investing in new processes, especially process control technologies, and some of the challenges board shops face updating brownfield sites.

A Focus on Process Control, Part 1

09/27/2022 | I-Connect007 Editorial Team
Michael Carano is a noted subject matter expert with respect to process control, electroplating and metallization technology, surface finishing, and reliability. So, it was only natural that we sat down to talk about mechanizing an existing facility given today’s fickle environment. Will any of the CHIPS funding trickle down to bare board fabrication? What process can be adjusted on the factory floor? The focus needs to be more than just on manufacturing and getting work out the door, he says, but also process control.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

08/05/2022 | Nolan Johnson, I-Connect007
The Top 5 list this week contains industry analysis from IPC’s Shawn DuBravac, news on the passage of the U.S. “CHIPS Plus” bill, new materials from Ventec, news about a fab for sale, and a chemistry company completing their acquisition, plus a brand new book in the I-Connect007 eBooks series.



Copyright © 2022 I-Connect007. All rights reserved.