Vidatronic Achieves up to 10X Speedup Using Cadence Spectre X Simulator
November 17, 2020 | Cadence Design Systems, Inc.Estimated reading time: 1 minute
Cadence Design Systems, Inc. announced that Vidatronic, Inc. has successfully used the Cadence® Spectre® X Simulator to achieve leading electromigration and IR drop (EM-IR) reliability analysis on leading-edge 7nm and 5nm analog IP designs for mobile, hyperscale and other consumer electronics. With the Spectre X Simulator, Vidatronic achieved up to 10X speedup and a 3X reduction in memory consumption versus the previous-generation Spectre simulator.
Vidatronic licenses analog intellectual property (IP) designs, including power management unit (PMU), wireless charger, and LED lighting solutions for integration into customers' systems on chip (SoCs) in advanced-process nodes from 180nm down to 5nm.
The Spectre X Simulator enabled the Vidatronic team to test the reliability of their IP within larger blocks, ensuring accurate design measurements. Prior to deploying the Spectre X Simulator, Vidatronic’s design simulation took days, and after, the team was able to complete simulation within hours. The Spectre X simulation flow was straightforward, and there was virtually no learning curve for the designers because the team had previous experience with the legacy Spectre simulator. With one project in particular, the Vidatronic engineering team completed a design simulation with two million nodes, 1.6 million capacitors and 4.04 million resistors in a matter of hours.
“The Spectre X Simulator helped us reach our overall verification goals of improved simulation performance and capacity,” said John Tabler, Principal Member of Technical Staff at Vidatronic. “Cadence helped us deliver signoff accuracy on our 5nm IP design while drastically improving runtime, reducing verification time from days to hours, enabling us to get to market faster.”
Suggested Items
PCBflow Helps Designers Choose Best Manufacturer for the Job
03/28/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with a few technologists who have first-hand experience with PCBflow: Susan Kayesar, technical product manager with Siemens; Evgeny Makhline, CTO of Nistec, a CEM based in Israel; and Peter Tranitz, senior director of technology solutions and leader of the IPC Design Initiative. They explain how PCBflow functions, from the designer’s and manufacturer’s viewpoint, and how this database helps break down the wall between these stakeholders.
Elementary, Mr. Watson: Ensuring Design Integrity
03/28/2024 | John Watson -- Column: Elementary, Mr. WatsonBack in February, many of us watched the "Big Game." It reminded me of the saying, “It's not how you start that is important, but rather how you finish." It is perfectly okay when you are talking about sports, you get off to a bad first half and need to recover in the second half. However, when it comes to PCB design, this is not a good practice. If things start badly, they usually don't recover. They continue down that same path, costing more money and losing design time.
Arrow Electronics Launches Intelligent Vision Ecosystem
03/27/2024 | BUSINESS WIREArrow Electronics, Inc. is utilizing the onsemi Imager Access System (IAS) module standard for developing intelligent vision solutions for use in robotics, machine vision, commercial cameras and other uses.
Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024
03/26/2024 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.
Synopsys Announces New AI-Driven EDA, IP and Systems Design Solutions At SNUG Silicon Valley
03/25/2024 | PRNewswireSynopsys, Inc. kicked off its annual flagship Synopsys User Group (SNUG) conference in Silicon Valley at the Santa Clara Convention Center with a keynote presentation by Synopsys president and CEO Sassine Ghazi. Ghazi discussed the unprecedented innovation opportunities and challenges that technology R&D teams face in this era of pervasive intelligence.