Mitsubishi Power Receives Order for First Solid Oxide Fuel Cell in Europe
October 29, 2020 | ACN NewswireEstimated reading time: 2 minutes
Mitsubishi Power has recently received an order to supply the first Solid Oxide Fuel Cell (SOFC) in Europe. The highly efficient hybrid system will be put into operation at the Gas- und Warme-Institut Essen e.V. (GWI) in Essen by March 2022. Among other things, flexible operation of the Hybrid-SOFC and the proportional use of hydrogen as a fuel gas are to be researched under real conditions.
The system is part of the research project "KWK.NRW 4.0" and is funded by the state of North Rhine-Westphalia and the European Regional Development Fund (ERDF). The Solid Oxide Fuel Cell (Hybrid-SOFC) from Mitsubishi Power plays a central role in the project. The highly efficient system not only supplies electricity and heat but can also be used decentralized and independently of the existing power grid. Another key advantage of the Hybrid-SOFC: the system can be operated flexibly with various fuels - from natural gas to biogas and hydrogen.
This Hybrid-SOFC can theoretically supply electricity to a large office building, a hospital or about 300 houses with electricity and heat. In addition to natural gas, liquefied natural gas and biogas, it can also be operated with hydrogen, where the only emission is water and contribute to the decarbonization of electricity. Mitsubishi Power already has installed 9 units of Hybrid-SOFC systems in Japan. The plant in Essen will be the first of its kind outside Japan.
Thanks to its compact dimensions, the Hybrid-SOFC can also be ideally integrated into a user's existing power and heat supply system. At GWI, the start-up and shut-down procedure of the plant as well as the dynamic (partial load) operation will be demonstrated. "An energy system with a high proportion of renewable energies inevitably requires plants that can supply electricity and heat reliably, quickly and in an environmentally friendly manner when the sun is not shining and the wind is not blowing," says Professor Klaus Gorner, scientific director of GWI. This kind of flexible and sustainable operation - especially with blending of hydrogen as fuel gas - will be comprehensively realized with the Hybrid-SOFC.
"We are delighted to bring the unique SOFC system to European market. It confirms the growing demand for clean energy sources where Mitsubishi Power has vast expertise", adds Professor Emmanouil Kakaras, Head of the New Products Business Unit at Mitsubishi Power Europe. "Apart from SOFC, we are fully equipped with numerous state-of-the-art technologies and solutions which are contributing to a successful energy transition." These include hydrogen-ready gas turbines, large-scale battery storage solutions, Power-to-X technologies, biomass conversion, and heat pump systems.
Suggested Items
Lockheed Martin Australia, The Department Of Defence Sign Strategic Partnership Head Contract
04/26/2024 | Lockheed MartinLockheed Martin Australia signed a landmark AUD$500 million contract with the Department of Defence to build Australia’s future Joint Air Battle Management System under project - AIR6500 Phase 1 (AIR6500-1).
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.