Toyota to Test Heavy-Duty Fuel Cell Electric Truck Verification


Reading time ( words)

Asahi Group Holdings, Ltd., Seino Transportation Co., Ltd., NEXT Logistics Japan Co., Ltd., Yamato Transport Co., Ltd., Toyota Motor Corporation, and Hino Motors, Ltd. have agreed to conduct on-the-road trials of heavy-duty fuel cell electric trucks (heavy-duty FCETs) starting in spring of 2022, accelerating the early commercial application of heavy-duty FCETs and contributing to the development of a sustainable society.

This may be achieved, at least in part, by reducing CO2 emissions from heavy-duty FCETs, which account for approximately 70 percent of all CO2 emissions from commercial vehicles in Japan*. Toyota and Hino are jointly developing heavy-duty FCETs, and Asahi Group, NLJ, Seino Transportation, Yamato Transport, and Toyota will perform the road trials in their logistics operations.

The heavy-duty FCETs used in highway transportation must have an adequate range and load capacity as well as being able to refuel quickly. Fuel cell systems, which are powered by high-energy-density hydrogen, are believed to be effective for the electrification of heavy-duty trucks. The heavy-duty FCETs that will be developed are anticipated to have a target range of approximately 600 km. The objective is to meet high standards for both environmental performance and practicality as a commercial vehicle.

Each of the companies participating in the trials have positioned global environmental issues as key management issues, and are taking various actions including reducing energy consumption in manufacturing processes and reducing environmental impact in logistics operations. Going forward, each company will accelerate its efforts for early practical application of heavy-duty FCETs with the aim of contributing to the development of a sustainable society.

*Trucks and buses with a gross vehicle weight of over 3.5 tons, according to research by Hino, as of September 30, 2020.

 

Share

Print


Suggested Items

NASA Selects First Commercial Moon Landing Services for Artemis Program

06/11/2019 | NASA
NASA has selected three commercial Moon landing service providers that will deliver science and technology payloads under Commercial Lunar Payload Services (CLPS) as part of the Artemis program. Each commercial lander will carry NASA-provided payloads that will conduct science investigations and demonstrate advanced technologies on the lunar surface, paving the way for NASA astronauts to land on the lunar surface by 2024.

CONFERS to Establish “Rules of the Road” for On-Orbit Servicing of Satellites

10/06/2017 | DARPA
“Rules of the road”—widely accepted norms of safety-related behavior based on common understanding—have existed in various forms over the centuries, and have evolved as new technologies have revolutionized how people and vehicles travel. But how are these “rules” created when common understanding of new capabilities is not yet established?

DARPA’s Drive to Keep the Microelectronics Revolution at Full Speed Builds Its Own Momentum

08/28/2017 | DARPA
To perpetuate the pace of innovation and progress in microelectronics technology over the past half-century, it will take an enormous village rife with innovators. This week, about 100 of those innovators throughout the broader technology ecosystem, including participants from the military, commercial, and academic sectors, gathered at DARPA headquarters at the kickoff meeting for the Agency’s new CHIPS program, known in long form as the Common Heterogeneous Integration and Intellectual Property (IP) Reuse Strategies program.



Copyright © 2020 I-Connect007. All rights reserved.